Merge tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/g…

…it/tiwai/sound Pull sound updates from Takashi Iwai: "Mostly many small changes spread as seen in diffstat in sound/* directory by this update. A significant change in the subsystem level is the introduction of snd_soc_component, which will help more generic handling of SoC and off-SoC components. Also, snd_BUG_ON() macro is enabled unconditionally now due to its misuses, so people might hit kernel warnings (it's a good thing for us). - compress-offload: support for capture by Charles Keepax - HD-audio: codec delay support by Dylan Reid - HD-audio: improvements/fixes in generic parser: better headphone mic and headset mic support, jack_modes hint consolidation, proper beep attach/detachment, generalized power filter controls by David Henningsson, et al - HD-audio: Improved management of HDMI codec pins/converters - HD-audio: Better pin/DAC assignment for VIA codecs - HD-audio: Haswell HDMI workarounds - HD-audio: ALC268 codec support, a few new quirks for Chromebooks - USB: regression fixes: USB-MIDI autopm fix, the recent ISO latency fix by Clemens Ladisch - USB: support for DSD formats by Daniel Mack - USB: A few UAC2 device endian/cock fixes by Eldad Zack - USB: quirks for Emu 192kHz support, Novation Twitch DJ controller, Yamaha THRxx devices - HDSPM: updates for TCO controls by Adrian Knoth - ASoC: Add a snd_soc_component object type for generic handling of SoC and off-SoC components by Kuninori Morimoto, - dmaengine: a large set of cleanups and conversions by Lars-Peter Clausen - ASoC DAPM: performance optimizations from Ryo Tsutsui - ASoC DAPM: support for mixer control sharing by Stephen Warren - ASoC: multiplatform ARM cleanups from Arnd Bergmann - ASoC: new codec drivers for AK5385 and TAS5086 from Daniel Mack" * tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (315 commits) ALSA: usb-audio: caiaq: fix endianness bug in snd_usb_caiaq_maschine_dispatch ALSA: asihpi: add format support check in snd_card_asihpi_capture_formats ALSA: pcm_format_to_bits strong-typed conversion ALSA: compress: fix the states to check for allowing read ALSA: hda - Move Thinkpad X220 to use auto parser ALSA: USB: adjust for changed 3.8 USB API ALSA: usb - Avoid unnecessary sample rate changes on USB 2.0 clock sources sound: oss/dmabuf: use dma_map_single ALSA: ali5451: use mdelay instead of large udelay constants ALSA: hda - Add the support for ALC286 codec ALSA: usb-audio: USB quirk for Yamaha THR10C ALSA: usb-audio: USB quirk for Yamaha THR5A ALSA: usb-audio: USB quirk for Yamaha THR10 ALSA: usb-audio: Fix autopm error during probing ALSA: snd-usb: try harder to find USB_DT_CS_ENDPOINT ALSA: sound kconfig typo ALSA: emu10k1: Fix dock firmware loading ASoC: ux500: forward declare msp_i2s_platform_data ASoC: davinci-mcasp: Add Support BCLK-to-LRCLK ratio for TDM modes ASoC: davinci-pcm, davinci-mcasp: Clean up active_serializers ...
cbmeeks · May 3, 2013 · 9992ba7 · 9992ba7
2 parents 00fdffb + 4ca231b
commit 9992ba7
Show file tree

Hide file tree

Showing 267 changed files with 7,241 additions and 3,721 deletions.
diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -6164,14 +6164,12 @@ struct _snd_pcm_runtime {
 
       <para>
         The macro takes an conditional expression to evaluate.
-	When <constant>CONFIG_SND_DEBUG</constant>, is set, the
-	expression is actually evaluated. If it's non-zero, it shows
-	the warning message such as
+	When <constant>CONFIG_SND_DEBUG</constant>, is set, if the
+	expression is non-zero, it shows the warning message such as
 	<computeroutput>BUG? (xxx)</computeroutput>
-	normally followed by stack trace.  It returns the evaluated
-	value.
-	When no <constant>CONFIG_SND_DEBUG</constant> is set, this
-	macro always returns zero.
+	normally followed by stack trace.
+
+	In both cases it returns the evaluated value.
       </para>
 
     </section>

diff --git a/Documentation/devicetree/bindings/sound/ak5386.txt b/Documentation/devicetree/bindings/sound/ak5386.txt
@@ -0,0 +1,19 @@
+AK5386 Single-ended 24-Bit 192kHz delta-sigma ADC
+
+This device has no control interface.
+
+Required properties:
+
+  - compatible : "asahi-kasei,ak5386"
+
+Optional properties:
+
+  - reset-gpio : a GPIO spec for the reset/power down pin.
+		 If specified, it will be deasserted at probe time.
+
+Example:
+
+spdif: ak5386@0 {
+	compatible = "asahi-kasei,ak5386";
+	reset-gpio = <&gpio0 23>;
+};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
@@ -1,12 +1,22 @@
 NVIDIA Tegra30 AHUB (Audio Hub)
 
 Required properties:
-- compatible : "nvidia,tegra30-ahub"
+- compatible : "nvidia,tegra30-ahub", "nvidia,tegra114-ahub", etc.
 - reg : Should contain the register physical address and length for each of
-  the AHUB's APBIF registers and the AHUB's own registers.
+  the AHUB's register blocks.
+  - Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks.
+  - Tegra114 requires an additional entry, for the APBIF2 register block.
 - interrupts : Should contain AHUB interrupt
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for the first APBIF channel.
+- nvidia,dma-request-selector : A list of the DMA channel specifiers. Each
+  entry contains the Tegra DMA controller's phandle and request selector.
+  If a single entry is present, the request selectors for the channels are
+  assumed to be contiguous, and increment from this value.
+  If multiple values are given, one value must be given per channel.
+- clocks : Must contain an entry for each required entry in clock-names.
+- clock-names : Must include the following entries:
+  - Tegra30: Requires d_audio, apbif, i2s0, i2s1, i2s2, i2s3, i2s4, dam0,
+    dam1, dam2, spdif_in.
+  - Tegra114: Additionally requires amx, adx.
 - ranges : The bus address mapping for the configlink register bus.
   Can be empty since the mapping is 1:1.
 - #address-cells : For the configlink bus. Should be <1>;
@@ -25,7 +35,13 @@ ahub@70080000 {
 	reg = <0x70080000 0x200 0x70080200 0x100>;
 	interrupts = < 0 103 0x04 >;
 	nvidia,dma-request-selector = <&apbdma 1>;
-
+	clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
+		<&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>,
+		<&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>,
+		<&tegra_car 110>, <&tegra_car 162>;
+	clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+		"i2s3", "i2s4", "dam0", "dam1", "dam2",
+		"spdif_in";
 	ranges;
 	#address-cells = <1>;
 	#size-cells = <1>;

diff --git a/Documentation/devicetree/bindings/sound/ti,tas5086.txt b/Documentation/devicetree/bindings/sound/ti,tas5086.txt
@@ -0,0 +1,32 @@
+Texas Instruments TAS5086 6-channel PWM Processor
+
+Required properties:
+
+ - compatible:		Should contain "ti,tas5086".
+ - reg:			The i2c address. Should contain <0x1b>.
+
+Optional properties:
+
+ - reset-gpio: 		A GPIO spec to define which pin is connected to the
+			chip's !RESET pin. If specified, the driver will
+			assert a hardware reset at probe time.
+
+ - ti,charge-period:	This property should contain the time in microseconds
+			that closely matches the external single-ended
+			split-capacitor charge period. The hardware chip
+			waits for this period of time before starting the
+			PWM signals. This helps reduce pops and clicks.
+
+			When not specified, the hardware default of 1300ms
+			is retained.
+
+Examples:
+
+	i2c_bus {
+		tas5086@1b {
+			compatible = "ti,tas5086";
+			reg = <0x1b>;
+			reset-gpio = <&gpio 23 0>;
+			ti,charge-period = <156000>;
+		};
+	};
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
@@ -461,11 +461,13 @@ The generic parser supports the following hints:
   the corresponding mixer control, if available
 - add_stereo_mix_input (bool): add the stereo mix (analog-loopback
   mix) to the input mux if available
-- add_out_jack_modes (bool): add "xxx Jack Mode" enum controls to each
-  output jack for allowing to change the headphone amp capability
-- add_in_jack_modes (bool): add "xxx Jack Mode" enum controls to each
-  input jack for allowing to change the mic bias vref
+- add_jack_modes (bool): add "xxx Jack Mode" enum controls to each
+  I/O jack for allowing to change the headphone amp and mic bias VREF
+  capabilities
 - power_down_unused (bool): power down the unused widgets
+- add_hp_mic (bool): add the headphone to capture source if possible
+- hp_mic_detect (bool): enable/disable the hp/mic shared input for a
+  single built-in mic case; default true
 - mixer_nid (int): specifies the widget NID of the analog-loopback
   mixer
 

diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c
@@ -25,10 +25,8 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>
-#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {

diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c
@@ -25,10 +25,8 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>
-#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }

diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c
@@ -25,10 +25,8 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>
-#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {

diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -25,10 +25,8 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>
-#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 #define MAP(x) { \

diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
@@ -146,14 +146,20 @@ struct platform_device s3c_device_camif = {
 
 /* ASOC DMA */
 
+#ifdef CONFIG_PLAT_S5P 
+static struct resource samsung_asoc_idma_resource = DEFINE_RES_IRQ(IRQ_I2S0);
+
 struct platform_device samsung_asoc_idma = {
 	.name		= "samsung-idma",
 	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &samsung_asoc_idma_resource,
 	.dev		= {
 		.dma_mask		= &samsung_device_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	}
 };
+#endif
 
 /* FB */
 

diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
@@ -290,12 +290,14 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000176, 0x0000 },   /* R374   - FLL1 Control 6 */ 
 	{ 0x00000177, 0x0181 },   /* R375   - FLL1 Loop Filter Test 1 */ 
 	{ 0x00000178, 0x0000 },   /* R376   - FLL1 NCO Test 0 */
+	{ 0x00000179, 0x0000 },   /* R377   - FLL1 Control 7 */
 	{ 0x00000181, 0x0000 },   /* R385   - FLL1 Synchroniser 1 */ 
 	{ 0x00000182, 0x0000 },   /* R386   - FLL1 Synchroniser 2 */ 
 	{ 0x00000183, 0x0000 },   /* R387   - FLL1 Synchroniser 3 */ 
 	{ 0x00000184, 0x0000 },   /* R388   - FLL1 Synchroniser 4 */ 
 	{ 0x00000185, 0x0000 },   /* R389   - FLL1 Synchroniser 5 */ 
 	{ 0x00000186, 0x0000 },   /* R390   - FLL1 Synchroniser 6 */ 
+	{ 0x00000187, 0x0001 },   /* R391   - FLL1 Synchroniser 7 */
 	{ 0x00000189, 0x0000 },   /* R393   - FLL1 Spread Spectrum */ 
 	{ 0x0000018A, 0x0004 },   /* R394   - FLL1 GPIO Clock */ 
 	{ 0x00000191, 0x0000 },   /* R401   - FLL2 Control 1 */ 
@@ -306,12 +308,14 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000196, 0x0000 },   /* R406   - FLL2 Control 6 */ 
 	{ 0x00000197, 0x0000 },   /* R407   - FLL2 Loop Filter Test 1 */ 
 	{ 0x00000198, 0x0000 },   /* R408   - FLL2 NCO Test 0 */
+	{ 0x00000199, 0x0000 },   /* R409   - FLL2 Control 7 */
 	{ 0x000001A1, 0x0000 },   /* R417   - FLL2 Synchroniser 1 */ 
 	{ 0x000001A2, 0x0000 },   /* R418   - FLL2 Synchroniser 2 */ 
 	{ 0x000001A3, 0x0000 },   /* R419   - FLL2 Synchroniser 3 */ 
 	{ 0x000001A4, 0x0000 },   /* R420   - FLL2 Synchroniser 4 */ 
 	{ 0x000001A5, 0x0000 },   /* R421   - FLL2 Synchroniser 5 */ 
 	{ 0x000001A6, 0x0000 },   /* R422   - FLL2 Synchroniser 6 */ 
+	{ 0x000001A7, 0x0001 },   /* R423   - FLL2 Synchroniser 7 */
 	{ 0x000001A9, 0x0000 },   /* R425   - FLL2 Spread Spectrum */ 
 	{ 0x000001AA, 0x0004 },   /* R426   - FLL2 GPIO Clock */ 
 	{ 0x00000200, 0x0006 },   /* R512   - Mic Charge Pump 1 */ 
@@ -1055,12 +1059,14 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL1_CONTROL_6:
 	case ARIZONA_FLL1_LOOP_FILTER_TEST_1:
 	case ARIZONA_FLL1_NCO_TEST_0:
+	case ARIZONA_FLL1_CONTROL_7:
 	case ARIZONA_FLL1_SYNCHRONISER_1:
 	case ARIZONA_FLL1_SYNCHRONISER_2:
 	case ARIZONA_FLL1_SYNCHRONISER_3:
 	case ARIZONA_FLL1_SYNCHRONISER_4:
 	case ARIZONA_FLL1_SYNCHRONISER_5:
 	case ARIZONA_FLL1_SYNCHRONISER_6:
+	case ARIZONA_FLL1_SYNCHRONISER_7:
 	case ARIZONA_FLL1_SPREAD_SPECTRUM:
 	case ARIZONA_FLL1_GPIO_CLOCK:
 	case ARIZONA_FLL2_CONTROL_1:
@@ -1071,12 +1077,14 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL2_CONTROL_6:
 	case ARIZONA_FLL2_LOOP_FILTER_TEST_1:
 	case ARIZONA_FLL2_NCO_TEST_0:
+	case ARIZONA_FLL2_CONTROL_7:
 	case ARIZONA_FLL2_SYNCHRONISER_1:
 	case ARIZONA_FLL2_SYNCHRONISER_2:
 	case ARIZONA_FLL2_SYNCHRONISER_3:
 	case ARIZONA_FLL2_SYNCHRONISER_4:
 	case ARIZONA_FLL2_SYNCHRONISER_5:
 	case ARIZONA_FLL2_SYNCHRONISER_6:
+	case ARIZONA_FLL2_SYNCHRONISER_7:
 	case ARIZONA_FLL2_SPREAD_SPECTRUM:
 	case ARIZONA_FLL2_GPIO_CLOCK:
 	case ARIZONA_MIC_CHARGE_PUMP_1:
@@ -1169,6 +1177,8 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_NOISE_GATE_CONTROL:
 	case ARIZONA_PDM_SPK1_CTRL_1:
 	case ARIZONA_PDM_SPK1_CTRL_2:
+	case ARIZONA_SPK_CTRL_2:
+	case ARIZONA_SPK_CTRL_3:
 	case ARIZONA_DAC_COMP_1:
 	case ARIZONA_DAC_COMP_2:
 	case ARIZONA_DAC_COMP_3:

diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
@@ -85,12 +85,14 @@
 #define ARIZONA_FLL1_CONTROL_6                   0x176
 #define ARIZONA_FLL1_LOOP_FILTER_TEST_1          0x177
 #define ARIZONA_FLL1_NCO_TEST_0                  0x178
+#define ARIZONA_FLL1_CONTROL_7                   0x179
 #define ARIZONA_FLL1_SYNCHRONISER_1              0x181
 #define ARIZONA_FLL1_SYNCHRONISER_2              0x182
 #define ARIZONA_FLL1_SYNCHRONISER_3              0x183
 #define ARIZONA_FLL1_SYNCHRONISER_4              0x184
 #define ARIZONA_FLL1_SYNCHRONISER_5              0x185
 #define ARIZONA_FLL1_SYNCHRONISER_6              0x186
+#define ARIZONA_FLL1_SYNCHRONISER_7              0x187
 #define ARIZONA_FLL1_SPREAD_SPECTRUM             0x189
 #define ARIZONA_FLL1_GPIO_CLOCK                  0x18A
 #define ARIZONA_FLL2_CONTROL_1                   0x191
@@ -101,12 +103,14 @@
 #define ARIZONA_FLL2_CONTROL_6                   0x196
 #define ARIZONA_FLL2_LOOP_FILTER_TEST_1          0x197
 #define ARIZONA_FLL2_NCO_TEST_0                  0x198
+#define ARIZONA_FLL2_CONTROL_7                   0x199
 #define ARIZONA_FLL2_SYNCHRONISER_1              0x1A1
 #define ARIZONA_FLL2_SYNCHRONISER_2              0x1A2
 #define ARIZONA_FLL2_SYNCHRONISER_3              0x1A3
 #define ARIZONA_FLL2_SYNCHRONISER_4              0x1A4
 #define ARIZONA_FLL2_SYNCHRONISER_5              0x1A5
 #define ARIZONA_FLL2_SYNCHRONISER_6              0x1A6
+#define ARIZONA_FLL2_SYNCHRONISER_7              0x1A7
 #define ARIZONA_FLL2_SPREAD_SPECTRUM             0x1A9
 #define ARIZONA_FLL2_GPIO_CLOCK                  0x1AA
 #define ARIZONA_MIC_CHARGE_PUMP_1                0x200
@@ -217,6 +221,8 @@
 #define ARIZONA_PDM_SPK1_CTRL_2                  0x491
 #define ARIZONA_PDM_SPK2_CTRL_1                  0x492
 #define ARIZONA_PDM_SPK2_CTRL_2                  0x493
+#define ARIZONA_SPK_CTRL_2                       0x4B5
+#define ARIZONA_SPK_CTRL_3                       0x4B6
 #define ARIZONA_DAC_COMP_1                       0x4DC
 #define ARIZONA_DAC_COMP_2                       0x4DD
 #define ARIZONA_DAC_COMP_3                       0x4DE
@@ -1681,6 +1687,13 @@
 #define ARIZONA_FLL1_FRC_INTEG_VAL_SHIFT              0  /* FLL1_FRC_INTEG_VAL - [11:0] */
 #define ARIZONA_FLL1_FRC_INTEG_VAL_WIDTH             12  /* FLL1_FRC_INTEG_VAL - [11:0] */
 
+/*
+ * R377 (0x179) - FLL1 Control 7
+ */
+#define ARIZONA_FLL1_GAIN_MASK                   0x003c  /* FLL1_GAIN */
+#define ARIZONA_FLL1_GAIN_SHIFT                       2  /* FLL1_GAIN */
+#define ARIZONA_FLL1_GAIN_WIDTH                       4  /* FLL1_GAIN */
+
 /*
  * R385 (0x181) - FLL1 Synchroniser 1
  */
@@ -1727,6 +1740,17 @@
 #define ARIZONA_FLL1_CLK_SYNC_SRC_SHIFT               0  /* FLL1_CLK_SYNC_SRC - [3:0] */
 #define ARIZONA_FLL1_CLK_SYNC_SRC_WIDTH               4  /* FLL1_CLK_SYNC_SRC - [3:0] */
 
+/*
+ * R391 (0x187) - FLL1 Synchroniser 7
+ */
+#define ARIZONA_FLL1_SYNC_GAIN_MASK              0x003c  /* FLL1_SYNC_GAIN */
+#define ARIZONA_FLL1_SYNC_GAIN_SHIFT                  2  /* FLL1_SYNC_GAIN */
+#define ARIZONA_FLL1_SYNC_GAIN_WIDTH                  4  /* FLL1_SYNC_GAIN */
+#define ARIZONA_FLL1_SYNC_BW                     0x0001  /* FLL1_SYNC_BW */
+#define ARIZONA_FLL1_SYNC_BW_MASK                0x0001  /* FLL1_SYNC_BW */
+#define ARIZONA_FLL1_SYNC_BW_SHIFT                    0  /* FLL1_SYNC_BW */
+#define ARIZONA_FLL1_SYNC_BW_WIDTH                    1  /* FLL1_SYNC_BW */
+
 /*
  * R393 (0x189) - FLL1 Spread Spectrum
  */
@@ -1819,6 +1843,13 @@
 #define ARIZONA_FLL2_FRC_INTEG_VAL_SHIFT              0  /* FLL2_FRC_INTEG_VAL - [11:0] */
 #define ARIZONA_FLL2_FRC_INTEG_VAL_WIDTH             12  /* FLL2_FRC_INTEG_VAL - [11:0] */
 
+/*
+ * R409 (0x199) - FLL2 Control 7
+ */
+#define ARIZONA_FLL2_GAIN_MASK                   0x003c  /* FLL2_GAIN */
+#define ARIZONA_FLL2_GAIN_SHIFT                       2  /* FLL2_GAIN */
+#define ARIZONA_FLL2_GAIN_WIDTH                       4  /* FLL2_GAIN */
+
 /*
  * R417 (0x1A1) - FLL2 Synchroniser 1
  */
@@ -1865,6 +1896,17 @@
 #define ARIZONA_FLL2_CLK_SYNC_SRC_SHIFT               0  /* FLL2_CLK_SYNC_SRC - [3:0] */
 #define ARIZONA_FLL2_CLK_SYNC_SRC_WIDTH               4  /* FLL2_CLK_SYNC_SRC - [3:0] */
 
+/*
+ * R423 (0x1A7) - FLL2 Synchroniser 7
+ */
+#define ARIZONA_FLL2_SYNC_GAIN_MASK              0x003c  /* FLL2_SYNC_GAIN */
+#define ARIZONA_FLL2_SYNC_GAIN_SHIFT                  2  /* FLL2_SYNC_GAIN */
+#define ARIZONA_FLL2_SYNC_GAIN_WIDTH                  4  /* FLL2_SYNC_GAIN */
+#define ARIZONA_FLL2_SYNC_BW_MASK                0x0001  /* FLL2_SYNC_BW */
+#define ARIZONA_FLL2_SYNC_BW_MASK                0x0001  /* FLL2_SYNC_BW */
+#define ARIZONA_FLL2_SYNC_BW_SHIFT                    0  /* FLL2_SYNC_BW */
+#define ARIZONA_FLL2_SYNC_BW_WIDTH                    1  /* FLL2_SYNC_BW */
+
 /*
  * R425 (0x1A9) - FLL2 Spread Spectrum
  */

diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
@@ -17,6 +17,7 @@
 
 #define WM8994_NUM_LDO   2
 #define WM8994_NUM_GPIO 11
+#define WM8994_NUM_AIF   3
 
 struct wm8994_ldo_pdata {
 	/** GPIOs to enable regulator, 0 or less if not available */
@@ -215,6 +216,13 @@ struct wm8994_pdata {
 	 * system.
 	 */
 	bool spkmode_pu;
+
+	/**
+	 * Maximum number of channels clocks will be generated for,
+	 * useful for systems where and I2S bus with multiple data
+	 * lines is mastered.
+	 */
+	int max_channels_clocked[WM8994_NUM_AIF];
 };
 
 #endif