pinctrl: msm: Add missing sdc1 and sdc3 groups

Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>

drivers/pinctrl/pinctrl-apq8064.c

@@ -109,6 +109,13 @@ static const struct pinctrl_pin_desc apq8064_pins[] = {
 	PINCTRL_PIN(87, "GPIO_87"),
 	PINCTRL_PIN(88, "GPIO_88"),
 	PINCTRL_PIN(89, "GPIO_89"),
+
+	PINCTRL_PIN(90, "SDC1_CLK"),
+	PINCTRL_PIN(91, "SDC1_CMD"),
+	PINCTRL_PIN(92, "SDC1_DATA"),
+	PINCTRL_PIN(93, "SDC3_CLK"),
+	PINCTRL_PIN(94, "SDC3_CMD"),
+	PINCTRL_PIN(95, "SDC3_DATA"),
 };
 
 #define DECLARE_APQ_GPIO_PINS(pin) static const unsigned int gpio##pin##_pins[] = { pin }
@@ -203,6 +210,13 @@ DECLARE_APQ_GPIO_PINS(87);
 DECLARE_APQ_GPIO_PINS(88);
 DECLARE_APQ_GPIO_PINS(89);
 
+static const unsigned int sdc1_clk_pins[] = { 90 };
+static const unsigned int sdc1_cmd_pins[] = { 91 };
+static const unsigned int sdc1_data_pins[] = { 92 };
+static const unsigned int sdc3_clk_pins[] = { 93 };
+static const unsigned int sdc3_cmd_pins[] = { 94 };
+static const unsigned int sdc3_data_pins[] = { 95 };
+
 #define FUNCTION(fname)					\
 	[APQ_MUX_##fname] = {				\
 		.name = #fname,				\
@@ -250,6 +264,31 @@ DECLARE_APQ_GPIO_PINS(89);
 		.intr_detection_width = 1,		\
 	}
 
+#define SDC_PINGROUP(pg_name, ctl, pull, drv)		\
+	{						\
+		.name = #pg_name,			\
+		.pins = pg_name##_pins,			\
+		.npins = ARRAY_SIZE(pg_name##_pins),	\
+		.ctl_reg = ctl,				\
+		.io_reg = 0,				\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.mux_bit = -1,				\
+		.pull_bit = pull,			\
+		.drv_bit = drv,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = -1,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+
 enum apq8064_functions {
 	APQ_MUX_cam_mclk,
 	APQ_MUX_codec_mic_i2s,
@@ -514,6 +553,14 @@ static const struct msm_pingroup apq8064_groups[] = {
 	PINGROUP(87, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(88, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(89, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+
+	SDC_PINGROUP(sdc1_clk, 0x20a0, 13, 6),
+	SDC_PINGROUP(sdc1_cmd, 0x20a0, 11, 3),
+	SDC_PINGROUP(sdc1_data, 0x20a0, 9, 0),
+
+	SDC_PINGROUP(sdc3_clk, 0x20a4, 14, 6),
+	SDC_PINGROUP(sdc3_cmd, 0x20a4, 11, 3),
+	SDC_PINGROUP(sdc3_data, 0x20a4, 9, 0),
 };
 
 #define NUM_GPIO_PINGROUPS 90