Merge branches 'iommu/fixes', 'dma-debug', 'arm/omap', 'arm/tegra', '…

…core' and 'x86/amd' into next

Documentation/ABI/stable/sysfs-driver-usb-usbtmc

@@ -1,5 +1,5 @@
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/device_capabilities
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <[email protected]>
 Description:
@@ -12,8 +12,8 @@ Description:
 		The files are read only.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <[email protected]>
 Description:
@@ -27,7 +27,7 @@ Description:
 		The files are read only.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermChar
+What:		/sys/bus/usb/drivers/usbtmc/*/TermChar
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <[email protected]>
 Description:
@@ -40,7 +40,7 @@ Description:
 		sent to the device or not.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled
+What:		/sys/bus/usb/drivers/usbtmc/*/TermCharEnabled
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <[email protected]>
 Description:
@@ -51,7 +51,7 @@ Description:
 		published by the USB-IF.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/auto_abort
+What:		/sys/bus/usb/drivers/usbtmc/*/auto_abort
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <[email protected]>
 Description:

Documentation/ABI/testing/sysfs-block-rssd

@@ -0,0 +1,18 @@
+What:           /sys/block/rssd*/registers
+Date:           March 2012
+KernelVersion:  3.3
+Contact:        Asai Thambi S P <[email protected]>
+Description:    This is a read-only file. Dumps below driver information and
+                hardware registers.
+                    - S ACTive
+                    - Command Issue
+                    - Allocated
+                    - Completed
+                    - PORT IRQ STAT
+                    - HOST IRQ STAT
+
+What:           /sys/block/rssd*/status
+Date:           April 2012
+KernelVersion:  3.4
+Contact:        Asai Thambi S P <[email protected]>
+Description:   This is a read-only file. Indicates the status of the device.

Documentation/ABI/testing/sysfs-bus-hsi

@@ -0,0 +1,19 @@
+What:		/sys/bus/hsi
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <[email protected]>
+Description:
+		High Speed Synchronous Serial Interface (HSI) is a
+		serial interface mainly used for connecting application
+		engines (APE) with cellular modem engines (CMT) in cellular
+		handsets.
+		The bus will be populated with devices (hsi_clients) representing
+		the protocols available in the system. Bus drivers implement
+		those protocols.
+
+What:		/sys/bus/hsi/devices/.../modalias
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <[email protected]>
+Description:	Stores the same MODALIAS value emitted by uevent
+		Format: hsi:<hsi_client device name>

Documentation/ABI/testing/sysfs-cfq-target-latency

@@ -0,0 +1,8 @@
+What:		/sys/block/<device>/iosched/target_latency
+Date:		March 2012
+contact:	Tao Ma <[email protected]>
+Description:
+		The /sys/block/<device>/iosched/target_latency only exists
+		when the user sets cfq to /sys/block/<device>/scheduler.
+		It contains an estimated latency time for the cfq. cfq will
+		use it to calculate the time slice used for every task.

Documentation/DocBook/media/v4l/pixfmt-nv12m.xml

@@ -1,6 +1,6 @@
     <refentry id="V4L2-PIX-FMT-NV12M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_NV12M ('NV12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_NV12M ('NM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>

Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml

@@ -1,6 +1,6 @@
     <refentry id="V4L2-PIX-FMT-YUV420M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YU12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>

Documentation/cgroups/memory.txt

@@ -34,8 +34,7 @@ Current Status: linux-2.6.34-mmotm(development version of 2010/April)
 
 Features:
  - accounting anonymous pages, file caches, swap caches usage and limiting them.
- - private LRU and reclaim routine. (system's global LRU and private LRU
-   work independently from each other)
+ - pages are linked to per-memcg LRU exclusively, and there is no global LRU.
  - optionally, memory+swap usage can be accounted and limited.
  - hierarchical accounting
  - soft limit
@@ -154,7 +153,7 @@ updated. page_cgroup has its own LRU on cgroup.
 2.2.1 Accounting details
 
 All mapped anon pages (RSS) and cache pages (Page Cache) are accounted.
-Some pages which are never reclaimable and will not be on the global LRU
+Some pages which are never reclaimable and will not be on the LRU
 are not accounted. We just account pages under usual VM management.
 
 RSS pages are accounted at page_fault unless they've already been accounted

Documentation/devicetree/bindings/ata/calxeda-sata.txt → Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -1,10 +1,10 @@
-* Calxeda SATA Controller
+* AHCI SATA Controller
 
 SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "calxeda,hb-ahci"
+- compatible        : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
@@ -14,4 +14,3 @@ Example:
                 reg = <0xffe08000 0x1000>;
                 interrupts = <115>;
         };
-

Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt

@@ -0,0 +1,14 @@
+NVIDIA Tegra 20 GART
+
+Required properties:
+- compatible: "nvidia,tegra20-gart"
+- reg: Two pairs of cells specifying the physical address and size of
+  the memory controller registers and the GART aperture respectively.
+
+Example:
+
+	gart {
+		compatible = "nvidia,tegra20-gart";
+		reg = <0x7000f024 0x00000018	/* controller registers */
+		       0x58000000 0x02000000>;	/* GART aperture */
+	};

Documentation/devicetree/bindings/sound/sgtl5000.txt

@@ -3,6 +3,8 @@
 Required properties:
 - compatible : "fsl,sgtl5000".
 
+- reg : the I2C address of the device
+
 Example:
 
 codec: sgtl5000@0a {

Documentation/feature-removal-schedule.txt

@@ -531,3 +531,21 @@ Why:	There appear to be no production users of the get_robust_list syscall,
 	of ASLR. It was only ever intended for debugging, so it should be
 	removed.
 Who:	Kees Cook <[email protected]>
+
+----------------------------
+
+What:	setitimer accepts user NULL pointer (value)
+When:	3.6
+Why:	setitimer is not returning -EFAULT if user pointer is NULL. This
+	violates the spec.
+Who:	Sasikantha Babu <[email protected]>
+
+----------------------------
+
+What:	V4L2_CID_HCENTER, V4L2_CID_VCENTER V4L2 controls
+When:	3.7
+Why:	The V4L2_CID_VCENTER, V4L2_CID_HCENTER controls have been deprecated
+	for about 4 years and they are not used by any mainline driver.
+	There are newer controls (V4L2_CID_PAN*, V4L2_CID_TILT*) that provide
+	similar	functionality.
+Who:	Sylwester Nawrocki <[email protected]>

Documentation/filesystems/vfs.txt

@@ -114,7 +114,7 @@ members are defined:
 struct file_system_type {
 	const char *name;
 	int fs_flags;
-        struct dentry (*mount) (struct file_system_type *, int,
+        struct dentry *(*mount) (struct file_system_type *, int,
                        const char *, void *);
         void (*kill_sb) (struct super_block *);
         struct module *owner;

Documentation/kernel-parameters.txt

@@ -335,6 +335,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 					  requirements as needed. This option
 					  does not override iommu=pt
 
+	amd_iommu_dump=	[HW,X86-64]
+			Enable AMD IOMMU driver option to dump the ACPI table
+			for AMD IOMMU. With this option enabled, AMD IOMMU
+			driver will print ACPI tables for AMD IOMMU during
+			IOMMU initialization.
+
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>

Documentation/networking/ip-sysctl.txt

@@ -147,7 +147,7 @@ tcp_adv_win_scale - INTEGER
 	(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
 	if it is <= 0.
 	Possible values are [-31, 31], inclusive.
-	Default: 2
+	Default: 1
 
 tcp_allowed_congestion_control - STRING
 	Show/set the congestion control choices available to non-privileged
@@ -410,7 +410,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 	net.core.rmem_max.  Calling setsockopt() with SO_RCVBUF disables
 	automatic tuning of that socket's receive buffer size, in which
 	case this value is ignored.
-	Default: between 87380B and 4MB, depending on RAM size.
+	Default: between 87380B and 6MB, depending on RAM size.
 
 tcp_sack - BOOLEAN
 	Enable select acknowledgments (SACKS).

Documentation/power/freezing-of-tasks.txt

@@ -9,38 +9,39 @@ architectures).
 
 II. How does it work?
 
-There are four per-task flags used for that, PF_NOFREEZE, PF_FROZEN, TIF_FREEZE
+There are three per-task flags used for that, PF_NOFREEZE, PF_FROZEN
 and PF_FREEZER_SKIP (the last one is auxiliary).  The tasks that have
 PF_NOFREEZE unset (all user space processes and some kernel threads) are
 regarded as 'freezable' and treated in a special way before the system enters a
 suspend state as well as before a hibernation image is created (in what follows
 we only consider hibernation, but the description also applies to suspend).
 
 Namely, as the first step of the hibernation procedure the function
-freeze_processes() (defined in kernel/power/process.c) is called.  It executes
-try_to_freeze_tasks() that sets TIF_FREEZE for all of the freezable tasks and
-either wakes them up, if they are kernel threads, or sends fake signals to them,
-if they are user space processes.  A task that has TIF_FREEZE set, should react
-to it by calling the function called __refrigerator() (defined in
-kernel/freezer.c), which sets the task's PF_FROZEN flag, changes its state
-to TASK_UNINTERRUPTIBLE and makes it loop until PF_FROZEN is cleared for it.
-Then, we say that the task is 'frozen' and therefore the set of functions
-handling this mechanism is referred to as 'the freezer' (these functions are
-defined in kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h).
-User space processes are generally frozen before kernel threads.
+freeze_processes() (defined in kernel/power/process.c) is called.  A system-wide
+variable system_freezing_cnt (as opposed to a per-task flag) is used to indicate
+whether the system is to undergo a freezing operation. And freeze_processes()
+sets this variable.  After this, it executes try_to_freeze_tasks() that sends a
+fake signal to all user space processes, and wakes up all the kernel threads.
+All freezable tasks must react to that by calling try_to_freeze(), which
+results in a call to __refrigerator() (defined in kernel/freezer.c), which sets
+the task's PF_FROZEN flag, changes its state to TASK_UNINTERRUPTIBLE and makes
+it loop until PF_FROZEN is cleared for it. Then, we say that the task is
+'frozen' and therefore the set of functions handling this mechanism is referred
+to as 'the freezer' (these functions are defined in kernel/power/process.c,
+kernel/freezer.c & include/linux/freezer.h). User space processes are generally
+frozen before kernel threads.
 
 __refrigerator() must not be called directly.  Instead, use the
 try_to_freeze() function (defined in include/linux/freezer.h), that checks
-the task's TIF_FREEZE flag and makes the task enter __refrigerator() if the
-flag is set.
+if the task is to be frozen and makes the task enter __refrigerator().
 
 For user space processes try_to_freeze() is called automatically from the
 signal-handling code, but the freezable kernel threads need to call it
 explicitly in suitable places or use the wait_event_freezable() or
 wait_event_freezable_timeout() macros (defined in include/linux/freezer.h)
-that combine interruptible sleep with checking if TIF_FREEZE is set and calling
-try_to_freeze().  The main loop of a freezable kernel thread may look like the
-following one:
+that combine interruptible sleep with checking if the task is to be frozen and
+calling try_to_freeze().  The main loop of a freezable kernel thread may look
+like the following one:
 
 	set_freezable();
 	do {
@@ -53,7 +54,7 @@ following one:
 (from drivers/usb/core/hub.c::hub_thread()).
 
 If a freezable kernel thread fails to call try_to_freeze() after the freezer has
-set TIF_FREEZE for it, the freezing of tasks will fail and the entire
+initiated a freezing operation, the freezing of tasks will fail and the entire
 hibernation operation will be cancelled.  For this reason, freezable kernel
 threads must call try_to_freeze() somewhere or use one of the
 wait_event_freezable() and wait_event_freezable_timeout() macros.

Documentation/security/keys.txt

@@ -123,7 +123,7 @@ KEY SERVICE OVERVIEW
 
 The key service provides a number of features besides keys:
 
- (*) The key service defines two special key types:
+ (*) The key service defines three special key types:
 
      (+) "keyring"
 
@@ -137,6 +137,18 @@ The key service provides a number of features besides keys:
 	 blobs of data. These can be created, updated and read by userspace,
 	 and aren't intended for use by kernel services.
 
+     (+) "logon"
+
+	 Like a "user" key, a "logon" key has a payload that is an arbitrary
+	 blob of data. It is intended as a place to store secrets which are
+	 accessible to the kernel but not to userspace programs.
+
+	 The description can be arbitrary, but must be prefixed with a non-zero
+	 length string that describes the key "subclass". The subclass is
+	 separated from the rest of the description by a ':'. "logon" keys can
+	 be created and updated from userspace, but the payload is only
+	 readable from kernel space.
+
  (*) Each process subscribes to three keyrings: a thread-specific keyring, a
      process-specific keyring, and a session-specific keyring.
 

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -43,7 +43,9 @@ ALC680
 
 ALC882/883/885/888/889
 ======================
-  N/A
+  acer-aspire-4930g	Acer Aspire 4930G/5930G/6530G/6930G/7730G
+  acer-aspire-8930g	Acer Aspire 8330G/6935G
+  acer-aspire		Acer Aspire others
 
 ALC861/660
 ==========

Documentation/usb/URB.txt

@@ -168,6 +168,28 @@ that if the completion handler or anyone else tries to resubmit it
 they will get a -EPERM error.  Thus you can be sure that when
 usb_kill_urb() returns, the URB is totally idle.
 
+There is a lifetime issue to consider.  An URB may complete at any
+time, and the completion handler may free the URB.  If this happens
+while usb_unlink_urb or usb_kill_urb is running, it will cause a
+memory-access violation.  The driver is responsible for avoiding this,
+which often means some sort of lock will be needed to prevent the URB
+from being deallocated while it is still in use.
+
+On the other hand, since usb_unlink_urb may end up calling the
+completion handler, the handler must not take any lock that is held
+when usb_unlink_urb is invoked.  The general solution to this problem
+is to increment the URB's reference count while holding the lock, then
+drop the lock and call usb_unlink_urb or usb_kill_urb, and then
+decrement the URB's reference count.  You increment the reference
+count by calling
+
+	struct urb *usb_get_urb(struct urb *urb)
+
+(ignore the return value; it is the same as the argument) and
+decrement the reference count by calling usb_free_urb.  Of course,
+none of this is necessary if there's no danger of the URB being freed
+by the completion handler.
+
 
 1.7. What about the completion handler?
 

Documentation/usb/usbmon.txt

@@ -183,10 +183,10 @@ An input control transfer to get a port status.
 d5ea89a0 3575914555 S Ci:1:001:0 s a3 00 0000 0003 0004 4 <
 d5ea89a0 3575914560 C Ci:1:001:0 0 4 = 01050000
 
-An output bulk transfer to send a SCSI command 0x5E in a 31-byte Bulk wrapper
-to a storage device at address 5:
+An output bulk transfer to send a SCSI command 0x28 (READ_10) in a 31-byte
+Bulk wrapper to a storage device at address 5:
 
-dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 5e000000 00000000 00000600 00000000 00000000 00000000 000000
+dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 ad000000 00800000 80010a28 20000000 20000040 00000000 000000
 dd65f0e8 4128379808 C Bo:1:005:2 0 31 >
 
 * Raw binary format and API