🌆🅲🅸🆃🆈🆇🅴🅽☯️ 8 & 16 bit hijinx and programming!

GPIO Tracker - Commodore 64 Version

Version: 1.0 by Deadline with code from Dorktronic: https://github.com/dorktronic

Demonstration here: https://youtu.be/Opf6GL9stzQ

This program will set the user port output for 32 pin GPIO board from Dorktronic.

Features:

• Up to 256 Tracks, Up to 16 Patterns of 256 different states
• Speed up or Slow down during playback with programmable command
• Stop playback with programmable command

Notes:

• GPIOTracker Data is located from $4000 - $9fff (Note this could be reworked to use RAM Expansion devices in the future, or some other enhanced method than it is using now)
• Each block of GPIOTracker data is 1280 bytes

Build Notes:

• Edit Build.bat to set it for your environment
• Requires DASM and KickAssembler to build
• Uses Macros and Constants from https://github.com/cityxen/Commodore64_Programming repo

Commands:

Storage

    D - change drive number (toggles between drives 08,09,10,11)

    F - change filename (allows you to change the working filename)

    $ - shows directory of current disk

    S - saves data to filename on drive

    L - loads data from filename from drive

    E - Erase File

    N - Clear memory

Playback

    P - Play/Pause

Editing:

    F1 - Moves Track Block Cursor UP

    F3 - Moves Track Block Cursor DOWN

    F2 - Track Block Length DOWN

    F4 - Track Block Length UP

    ; - Changes Pattern for current track UP

    : - Changes Pattern for current track DOWN

    Cursor Down - Move Pattern Cursor Down

    Cursor Up - Move Pattern Cursor Up

    Cursor Right - Move GPIO Cursor right

    Cursor Left - Move GPIO Cursor left

    SPACE - Toggle pin within current GPIO Cursor

    MINUS - Turn off all pins on current line

    PLUS - Turn on all oins on current line

    HOME - Move Pattern Cursor to TOP

    CLR - Move Pattern Cursor to BOTTOM

    F5 - Pattern Cursor Page UP

    F7 - Pattern Cursor Page DOWN

    C - Change Command

            Command   Value
            SPEED   = 00 - 3F (Change the speed of playback.. Lower = Faster)
            STOP    = IGNORED (Stops playback)
            FUTURE  = IGNORED (Future command slot available with values from 00-1f)

    * - Change Command Data Value Up (Command Data range is from 00-3F)

    = - Change Command Data Value Down

Additional Features

    J - Toggle Joystick Control Mode

            JCM Modes:
            
            OFF  = Joystick doesn't affect anything
            PLAY = While fire button is pressed, track will play
            SS   = Fire release toggles playback (start / stop)
            Future modes:                
            *EDIT = Move Joystick Cursor within Pattern area to move, Fire toggle GPIO pin