Merge tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Program MPS for RCiEP devices (Ashok Raj)

   - Fix pci_register_host_bridge() device_register() error handling
     (Rob Herring)

   - Fix pci_host_bridge struct device release/free handling (Rob
     Herring)

  Resource management:

   - Allow resizing BARs for devices on root bus (Ard Biesheuvel)

  Power management:

   - Reduce Thunderbolt resume time by working around devices that don't
     support DLL Link Active reporting (Mika Westerberg)

   - Work around a Pericom USB controller OHCI/EHCI PME# defect
     (Kai-Heng Feng)

  Virtualization:

   - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok
     Raj)

   - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner)

   - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven)

  Error handling:

   - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership
     (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan)

   - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER
     events (Kuppuswamy Sathyanarayanan)

   - Don't enable AER by default in Kconfig (Bjorn Helgaas)

  Peer-to-peer DMA:

   - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher)

  ASPM:

   - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng)

  Endpoint framework:

   - Fix DMA channel release in test (Kunihiko Hayashi)

   - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar)

   - Add support to handle multiple base for mapping outbound memory
     (Lad Prabhakar)

  Generic host bridge driver:

   - Support building as module (Rob Herring)

   - Eliminate pci_host_common_probe wrappers (Rob Herring)

  Amlogic Meson PCIe controller driver:

   - Don't use FAST_LINK_MODE to set up link (Marc Zyngier)

  Broadcom STB PCIe controller driver:

   - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan)

   - Fix clk_put() error (Jim Quinlan)

   - Fix window register offset (Jim Quinlan)

   - Assert fundamental reset on initialization (Nicolas Saenz Julienne)

   - Add notify xHCI reset property (Nicolas Saenz Julienne)

   - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas
     Saenz Julienne)

   - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas
     Saenz Julienne)

  Cadence PCIe controller driver:

   - Remove "cdns,max-outbound-regions" DT property (replaced by
     "ranges") (Kishon Vijay Abraham I)

   - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT
     (Kishon Vijay Abraham I)

  Marvell Aardvark PCIe controller driver:

   - Improve link training (Marek Behún)

   - Add PHY support (Marek Behún)

   - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek
     Behún)

   - Train link immediately after enabling training to work around
     detection issues with some cards (Pali Rohár)

   - Issue PERST via GPIO to work around detection issues (Pali Rohár)

   - Don't blindly enable ASPM L0s (Pali Rohár)

   - Replace custom macros by standard linux/pci_regs.h macros (Pali
     Rohár)

  Microsoft Hyper-V host bridge driver:

   - Fix probe failure path to release resource (Wei Hu)

   - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu)

  Renesas R-Car PCIe controller driver:

   - Fix incorrect programming of OB windows (Andrew Murray)

   - Add suspend/resume (Kazufumi Ikeda)

   - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar)

   - Add endpoint controller driver (Lad Prabhakar)

   - Fix PCIEPAMR mask calculation (Lad Prabhakar)

   - Add r8a77961 to DT binding (Yoshihiro Shimoda)

  Socionext UniPhier Pro5 controller driver:

   - Add endpoint controller driver (Kunihiko Hayashi)

  Synopsys DesignWare PCIe controller driver:

   - Program outbound ATU upper limit register (Alan Mikhak)

   - Fix inner MSI IRQ domain registration (Marc Zyngier)

  Miscellaneous:

   - Check for platform_get_irq() failure consistently (negative return
     means failure) (Aman Sharma)

   - Fix several runtime PM get/put imbalances (Dinghao Liu)

   - Use flexible-array and struct_size() helpers for code cleanup
     (Gustavo A. R. Silva)

   - Update & fix issues in bridge emulation of PCIe registers (Jon
     Derrick)

   - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc)
     (Krzysztof Wilczyński)

   - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)"

* tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
  PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver
  PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints
  PCI/DPC: Print IRQ number used by port
  PCI/AER: Use "aer" variable for capability offset
  PCI/AER: Remove redundant dev->aer_cap checks
  PCI/AER: Remove redundant pci_is_pcie() checks
  PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership
  PCI: tegra: Fix runtime PM imbalance on error
  PCI: vmd: Filter resource type bits from shadow register
  PCI: tegra194: Fix runtime PM imbalance on error
  dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
  PCI: hv: Use struct_size() helper
  PCI: Rename _DSM constants to align with spec
  PCI: Avoid FLR for AMD Starship USB 3.0
  PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0
  x86/PCI: Drop unused xen_register_pirq() gsi_override parameter
  PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port
  PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
  PCI: dwc: Fix inner MSI IRQ domain registration
  PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()
  ...

Documentation/PCI/endpoint/pci-endpoint.rst

@@ -78,8 +78,8 @@ by the PCI controller driver.
    Cleanup the pci_epc_mem structure allocated during pci_epc_mem_init().
 
 
-APIs for the PCI Endpoint Function Driver
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+EPC APIs for the PCI Endpoint Function Driver
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 This section lists the APIs that the PCI Endpoint core provides to be used
 by the PCI endpoint function driver.
@@ -117,8 +117,8 @@ by the PCI endpoint function driver.
    The PCI endpoint function driver should use pci_epc_mem_free_addr() to
    free the memory space allocated using pci_epc_mem_alloc_addr().
 
-Other APIs
-~~~~~~~~~~
+Other EPC APIs
+~~~~~~~~~~~~~~
 
 There are other APIs provided by the EPC library. These are used for binding
 the EPF device with EPC device. pci-ep-cfs.c can be used as reference for
@@ -160,8 +160,8 @@ PCI Endpoint Function(EPF) Library
 The EPF library provides APIs to be used by the function driver and the EPC
 library to provide endpoint mode functionality.
 
-APIs for the PCI Endpoint Function Driver
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+EPF APIs for the PCI Endpoint Function Driver
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 This section lists the APIs that the PCI Endpoint core provides to be used
 by the PCI endpoint function driver.
@@ -204,8 +204,8 @@ by the PCI endpoint controller library.
    The PCI endpoint controller library invokes pci_epf_linkup() when the
    EPC device has established the connection to the host.
 
-Other APIs
-~~~~~~~~~~
+Other EPF APIs
+~~~~~~~~~~~~~~
 
 There are other APIs provided by the EPF library. These are used to notify
 the function driver when the EPF device is bound to the EPC device.

Documentation/devicetree/bindings/pci/aardvark-pci.txt

@@ -19,6 +19,9 @@ contain the following properties:
  - interrupt-map-mask and interrupt-map: standard PCI properties to
    define the mapping of the PCIe interface to interrupt numbers.
  - bus-range: PCI bus numbers covered
+ - phys: the PCIe PHY handle
+ - max-link-speed: see pci.txt
+ - reset-gpios: see pci.txt
 
 In addition, the Device Tree describing an Aardvark PCIe controller
 must include a sub-node that describes the legacy interrupt controller
@@ -48,6 +51,7 @@ Example:
 				<0 0 0 2 &pcie_intc 1>,
 				<0 0 0 3 &pcie_intc 2>,
 				<0 0 0 4 &pcie_intc 3>;
+		phys = <&comphy1 0>;
 		pcie_intc: interrupt-controller {
 			interrupt-controller;
 			#interrupt-cells = <1>;

Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

@@ -56,6 +56,8 @@ properties:
     description: Indicates usage of spread-spectrum clocking.
     type: boolean
 
+  aspm-no-l0s: true
+
 required:
   - reg
   - dma-ranges

Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Tom Joseph <[email protected]>
 
 allOf:
-  - $ref: "cdns-pcie.yaml#"
+  - $ref: "cdns-pcie-ep.yaml#"
   - $ref: "pci-ep.yaml#"
 
 properties:

Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml

@@ -45,8 +45,6 @@ examples:
             #size-cells = <2>;
             bus-range = <0x0 0xff>;
             linux,pci-domain = <0>;
-            cdns,max-outbound-regions = <16>;
-            cdns,no-bar-match-nbits = <32>;
             vendor-id = <0x17cd>;
             device-id = <0x0200>;
 
@@ -57,6 +55,7 @@ examples:
 
             ranges = <0x02000000 0x0 0x42000000  0x0 0x42000000  0x0 0x1000000>,
                      <0x01000000 0x0 0x43000000  0x0 0x43000000  0x0 0x0010000>;
+            dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
 
             #interrupt-cells = <0x1>;
 

Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml

@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence PCIe Device
+
+maintainers:
+  - Tom Joseph <[email protected]>
+
+allOf:
+  - $ref: "cdns-pcie.yaml#"
+
+properties:
+  cdns,max-outbound-regions:
+    description: maximum number of outbound regions
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    default: 32
+
+required:
+  - cdns,max-outbound-regions

Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml

@@ -14,6 +14,15 @@ allOf:
   - $ref: "cdns-pcie.yaml#"
 
 properties:
+  cdns,max-outbound-regions:
+    description: maximum number of outbound regions
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    default: 32
+    deprecated: true
+
   cdns,no-bar-match-nbits:
     description:
       Set into the no BAR match register to configure the number of least
@@ -22,5 +31,6 @@ properties:
     minimum: 0
     maximum: 64
     default: 32
+    deprecated: true
 
   msi-parent: true

Documentation/devicetree/bindings/pci/cdns-pcie.yaml

@@ -10,13 +10,6 @@ maintainers:
   - Tom Joseph <[email protected]>
 
 properties:
-  cdns,max-outbound-regions:
-    description: maximum number of outbound regions
-    $ref: /schemas/types.yaml#/definitions/uint32
-    minimum: 1
-    maximum: 32
-    default: 32
-
   phys:
     description:
       One per lane if more than one in the list. If only one PHY listed it must

Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml

@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Renesas Electronics Europe GmbH - https://www.renesas.com/eu/en/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rcar-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car PCIe Endpoint
+
+maintainers:
+  - Lad Prabhakar <[email protected]>
+  - Yoshihiro Shimoda <[email protected]>
+
+properties:
+  compatible:
+    items:
+      - const: renesas,r8a774c0-pcie-ep
+      - const: renesas,rcar-gen3-pcie-ep
+
+  reg:
+    maxItems: 5
+
+  reg-names:
+    items:
+      - const: apb-base
+      - const: memory0
+      - const: memory1
+      - const: memory2
+      - const: memory3
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pcie
+
+  max-functions:
+    minimum: 1
+    maximum: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - resets
+  - power-domains
+  - clocks
+  - clock-names
+  - max-functions
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
+    #include <dt-bindings/power/r8a774c0-sysc.h>
+
+     pcie0_ep: pcie-ep@fe000000 {
+            compatible = "renesas,r8a774c0-pcie-ep",
+                         "renesas,rcar-gen3-pcie-ep";
+            reg = <0xfe000000 0x80000>,
+                  <0xfe100000 0x100000>,
+                  <0xfe200000 0x200000>,
+                  <0x30000000 0x8000000>,
+                  <0x38000000 0x8000000>;
+            reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+            resets = <&cpg 319>;
+            power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+            clocks = <&cpg CPG_MOD 319>;
+            clock-names = "pcie";
+            max-functions = /bits/ 8 <1>;
+    };

Documentation/devicetree/bindings/pci/rcar-pci.txt

@@ -11,7 +11,8 @@ compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
 	    "renesas,pcie-r8a7791" for the R8A7791 SoC;
 	    "renesas,pcie-r8a7793" for the R8A7793 SoC;
 	    "renesas,pcie-r8a7795" for the R8A7795 SoC;
-	    "renesas,pcie-r8a7796" for the R8A7796 SoC;
+	    "renesas,pcie-r8a7796" for the R8A77960 SoC;
+	    "renesas,pcie-r8a77961" for the R8A77961 SoC;
 	    "renesas,pcie-r8a77980" for the R8A77980 SoC;
 	    "renesas,pcie-r8a77990" for the R8A77990 SoC;
 	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or

Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml

@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe endpoint controller
+
+description: |
+  UniPhier PCIe endpoint controller is based on the Synopsys DesignWare
+  PCI core. It shares common features with the PCIe DesignWare core and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/designware-pcie.txt.
+
+maintainers:
+  - Kunihiko Hayashi <[email protected]>
+
+allOf:
+  - $ref: "pci-ep.yaml#"
+
+properties:
+  compatible:
+    const: socionext,uniphier-pro5-pcie-ep
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: link
+      - const: addr_space
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: gio
+      - const: link
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: gio
+      - const: link
+
+  num-ib-windows:
+    const: 16
+
+  num-ob-windows:
+    const: 16
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie_ep: pcie-ep@66000000 {
+        compatible = "socionext,uniphier-pro5-pcie-ep";
+        reg-names = "dbi", "dbi2", "link", "addr_space";
+        reg = <0x66000000 0x1000>, <0x66001000 0x1000>,
+              <0x66010000 0x10000>, <0x67000000 0x400000>;
+        clock-names = "gio", "link";
+        clocks = <&sys_clk 12>, <&sys_clk 24>;
+        reset-names = "gio", "link";
+        resets = <&sys_rst 12>, <&sys_rst 24>;
+        num-ib-windows = <16>;
+        num-ob-windows = <16>;
+        num-lanes = <4>;
+        phy-names = "pcie-phy";
+        phys = <&pcie_phy>;
+    };

MAINTAINERS

@@ -13074,14 +13074,15 @@ L:	[email protected]
 L:	[email protected]
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
-F:	drivers/pci/controller/mobibeil/pcie-layerscape-gen4.c
+F:	drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
 
 PCI DRIVER FOR RENESAS R-CAR
 M:	Marek Vasut <[email protected]>
 M:	Yoshihiro Shimoda <[email protected]>
 L:	[email protected]
 L:	[email protected]
 S:	Maintained
+F:	Documentation/devicetree/bindings/pci/*rcar*
 F:	drivers/pci/controller/*rcar*
 
 PCI DRIVER FOR SAMSUNG EXYNOS
@@ -13275,8 +13276,8 @@ PCIE DRIVER FOR SOCIONEXT UNIPHIER
 M:	Kunihiko Hayashi <[email protected]>
 L:	[email protected]
 S:	Maintained
-F:	Documentation/devicetree/bindings/pci/uniphier-pcie.txt
-F:	drivers/pci/controller/dwc/pcie-uniphier.c
+F:	Documentation/devicetree/bindings/pci/uniphier-pcie*
+F:	drivers/pci/controller/dwc/pcie-uniphier*
 
 PCIE DRIVER FOR ST SPEAR13XX
 M:	Pratyush Anand <[email protected]>

arch/arm64/kernel/pci.c

@@ -117,7 +117,7 @@ pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
 	struct device *dev = &root->device->dev;
 	struct resource *bus_res = &root->secondary;
 	u16 seg = root->segment;
-	struct pci_ecam_ops *ecam_ops;
+	const struct pci_ecam_ops *ecam_ops;
 	struct resource cfgres;
 	struct acpi_device *adev;
 	struct pci_config_window *cfg;
@@ -185,7 +185,7 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
 
 	root_ops->release_info = pci_acpi_generic_release_info;
 	root_ops->prepare_resources = pci_acpi_root_prepare_resources;
-	root_ops->pci_ops = &ri->cfg->ops->pci_ops;
+	root_ops->pci_ops = (struct pci_ops *)&ri->cfg->ops->pci_ops;
 	bus = acpi_pci_root_create(root, root_ops, &ri->common, ri->cfg);
 	if (!bus)
 		return NULL;

arch/x86/pci/fixup.c

@@ -572,6 +572,10 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, pci_invalid_bar);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_invalid_bar);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_invalid_bar);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa1ec, pci_invalid_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa1ed, pci_invalid_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa26c, pci_invalid_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa26d, pci_invalid_bar);
 
 /*
  * Device [1022:7808]