My Auto-Z Calibration setup for RatOS. My goal here was to be able to include this single file in my printer.cfg and have everything "just work"

If you use this, PLEASE ensure you review EVERY SINGLE SETTING with regard to safe homing location, z hop, probe locations, etc. I STRONGLY suggest lowering your RatOS macro move speed so you have time to react if something needs tweaking.

This file is provided as-is with no warranty. Use at your own risk!

These plugins must be installed FIRST:

• PAM (https://github.com/HelgeKeck/pam)
• klipper_z_calibration (https://github.com/protoloft/klipper_z_calibration)

STLs were created by Stephen Lebed of the Rat-Rig Unofficial Discord community. STEPs were created from the STLs via Fusion 360, as the originals were created in 3ds max.

• Code is MIT licensed.
• STLs are CC BY-NC-SA 4.0

Better documentation will be forthcoming, and this repository will eventually be a plug-in that can be installed in Moonraker.