Merge tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kerne…

…l/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Kconfig: remove BE-only platforms from LE kernel build from Boqun
   Feng
 - Refresh ps3_defconfig from Geoff Levand
 - Emit GNU & SysV hashes for the vdso from Michael Ellerman
 - Define an enum for the bolted SLB indexes from Anshuman Khandual
 - Use a local to avoid multiple calls to get_slb_shadow() from Michael
   Ellerman
 - Add gettimeofday() benchmark from Michael Neuling
 - Avoid link stack corruption in __get_datapage() from Michael Neuling
 - Add virt_to_pfn and use this instead of opencoding from Aneesh Kumar
   K.V
 - Add ppc64le_defconfig from Michael Ellerman
 - pseries: extract of_helpers module from Andy Shevchenko
 - Correct string length in pseries_of_derive_parent() from Nathan
   Fontenot
 - Free the MSI bitmap if it was slab allocated from Denis Kirjanov
 - Shorten irq_chip name for the SIU from Christophe Leroy
 - Wait 1s for secondaries to enter OPAL during kexec from Samuel
   Mendoza-Jonas
 - Fix _ALIGN_* errors due to type difference, from Aneesh Kumar K.V
 - powerpc/pseries/hvcserver: don't memset pi_buff if it is null from
   Colin Ian King
 - Disable hugepd for 64K page size, from Aneesh Kumar K.V
 - Differentiate between hugetlb and THP during page walk from Aneesh
   Kumar K.V
 - Make PCI non-optional for pseries from Michael Ellerman
 - Individual System V IPC system calls from Sam bobroff
 - Add selftest of unmuxed IPC calls from Michael Ellerman
 - discard .exit.data at runtime from Stephen Rothwell
 - Delete old orphaned PrPMC 280/2800 DTS and boot file, from Paul
   Gortmaker
 - Use of_get_next_parent to simplify code from Christophe Jaillet
 - Paginate some xmon output from Sam bobroff
 - Add some more elements to the xmon PACA dump from Michael Ellerman
 - Allow the tm-syscall selftest to build with old headers from Michael
   Ellerman
 - Run EBB selftests only on POWER8 from Denis Kirjanov
 - Drop CONFIG_TUNE_CELL in favour of CONFIG_CELL_CPU from Michael
   Ellerman
 - Avoid reference to potentially freed memory in prom.c from Christophe
   Jaillet
 - Quieten boot wrapper output with run_cmd from Geoff Levand
 - EEH fixes and cleanups from Gavin Shan
 - Fix recursive fenced PHB on Broadcom shiner adapter from Gavin Shan
 - Use of_get_next_parent() in of_get_ibm_chip_id() from Michael
   Ellerman
 - Fix section mismatch warning in msi_bitmap_alloc() from Denis
   Kirjanov
 - Fix ps3-lpm white space from Rudhresh Kumar J
 - Fix ps3-vuart null dereference from Colin King
 - nvram: Add missing kfree in error path from Christophe Jaillet
 - nvram: Fix function name in some errors messages, from Christophe
   Jaillet
 - drivers/macintosh: adb: fix misleading Kconfig help text from Aaro
   Koskinen
 - agp/uninorth: fix a memleak in create_gatt_table from Denis Kirjanov
 - cxl: Free virtual PHB when removing from Andrew Donnellan
 - scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target from
   Michael Ellerman
 - scripts/kconfig/Makefile: Fix KBUILD_DEFCONFIG check when building
   with O= from Michael Ellerman
 - Freescale updates from Scott: Highlights include 64-bit book3e
   kexec/kdump support, a rework of the qoriq clock driver, device tree
   changes including qoriq fman nodes, support for a new 85xx board, and
   some fixes.
 - MPC5xxx updates from Anatolij: Highlights include a driver for
   MPC512x LocalPlus Bus FIFO with its device tree binding
   documentation, mpc512x device tree updates and some minor fixes.

* tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (106 commits)
  powerpc/msi: Fix section mismatch warning in msi_bitmap_alloc()
  powerpc/prom: Use of_get_next_parent() in of_get_ibm_chip_id()
  powerpc/pseries: Correct string length in pseries_of_derive_parent()
  powerpc/e6500: hw tablewalk: make sure we invalidate and write to the same tlb entry
  powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s)
  powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan
  powerpc/fsl: Add #clock-cells and clockgen label to clockgen nodes
  powerpc: handle error case in cpm_muram_alloc()
  powerpc: mpic: use IRQCHIP_SKIP_SET_WAKE instead of redundant mpic_irq_set_wake
  powerpc/book3e-64: Enable kexec
  powerpc/book3e-64/kexec: Set "r4 = 0" when entering spinloop
  powerpc/booke: Only use VIRT_PHYS_OFFSET on booke32
  powerpc/book3e-64/kexec: Enable SMP release
  powerpc/book3e-64/kexec: create an identity TLB mapping
  powerpc/book3e-64: Don't limit paca to 256 MiB
  powerpc/book3e/kdump: Enable crash_kexec_wait_realmode
  powerpc/book3e: support CONFIG_RELOCATABLE
  powerpc/booke64: Fix args to copy_and_flush
  powerpc/book3e-64: rename interrupt_end_book3e with __end_interrupts
  powerpc/e6500: kexec: Handle hardware threads
  ...

Documentation/devicetree/bindings/chosen.txt

@@ -44,3 +44,11 @@ Implementation note: Linux will look for the property "linux,stdout-path" or
 on PowerPC "stdout" if "stdout-path" is not found.  However, the
 "linux,stdout-path" and "stdout" properties are deprecated. New platforms
 should only use the "stdout-path" property.
+
+linux,booted-from-kexec
+-----------------------
+
+This property is set (currently only on PowerPC, and only needed on
+book3e) by some versions of kexec-tools to tell the new kernel that it
+is being booted by kexec, as the booting environment may differ (e.g.
+a different secondary CPU release mechanism)

Documentation/devicetree/bindings/clock/qoriq-clock.txt

@@ -1,6 +1,6 @@
 * Clock Block on Freescale QorIQ Platforms
 
-Freescale qoriq chips take primary clocking input from the external
+Freescale QorIQ chips take primary clocking input from the external
 SYSCLK signal. The SYSCLK input (frequency) is multiplied using
 multiple phase locked loops (PLL) to create a variety of frequencies
 which can then be passed to a variety of internal logic, including
@@ -13,14 +13,16 @@ which the chip complies.
 Chassis Version		Example Chips
 ---------------		-------------
 1.0			p4080, p5020, p5040
-2.0			t4240, b4860, t1040
+2.0			t4240, b4860
 
 1. Clock Block Binding
 
 Required properties:
-- compatible: Should contain a specific clock block compatible string
-	and a single chassis clock compatible string.
-	Clock block strings include, but not limited to, one of the:
+- compatible: Should contain a chip-specific clock block compatible
+	string and (if applicable) may contain a chassis-version clock
+	compatible string.
+
+	Chip-specific strings are of the form "fsl,<chip>-clockgen", such as:
 	* "fsl,p2041-clockgen"
 	* "fsl,p3041-clockgen"
 	* "fsl,p4080-clockgen"
@@ -30,15 +32,14 @@ Required properties:
 	* "fsl,b4420-clockgen"
 	* "fsl,b4860-clockgen"
 	* "fsl,ls1021a-clockgen"
-	Chassis clock strings include:
+	Chassis-version clock strings include:
 	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
 	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
 - reg: Describes the address of the device's resources within the
 	address space defined by its parent bus, and resource zero
 	represents the clock register set
-- clock-frequency: Input system clock frequency
 
-Recommended properties:
+Optional properties:
 - ranges: Allows valid translation between child's address space and
 	parent's. Must be present if the device has sub-nodes.
 - #address-cells: Specifies the number of cells used to represent
@@ -47,8 +48,46 @@ Recommended properties:
 - #size-cells: Specifies the number of cells used to represent
 	the size of an address. Must be present if the device has
 	sub-nodes and set to 1 if present
+- clock-frequency: Input system clock frequency (SYSCLK)
+- clocks: If clock-frequency is not specified, sysclk may be provided
+	as an input clock.  Either clock-frequency or clocks must be
+	provided.
+
+2. Clock Provider
+
+The clockgen node should act as a clock provider, though in older device
+trees the children of the clockgen node are the clock providers.
+
+When the clockgen node is a clock provider, #clock-cells = <2>.
+The first cell of the clock specifier is the clock type, and the
+second cell is the clock index for the specified type.
+
+	Type#	Name		Index Cell
+	0	sysclk		must be 0
+	1	cmux		index (n in CLKCnCSR)
+	2	hwaccel		index (n in CLKCGnHWACSR)
+	3	fman		0 for fm1, 1 for fm2
+	4	platform pll	0=pll, 1=pll/2, 2=pll/3, 3=pll/4
+
+3. Example
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+		clock-frequency = <133333333>;
+		reg = <0xe1000 0x1000>;
+		#clock-cells = <2>;
+	};
+
+	fman@400000 {
+		...
+		clocks = <&clockgen 3 0>;
+		...
+	};
+}
+4. Legacy Child Nodes
 
-2. Clock Provider/Consumer Binding
+NOTE: These nodes are deprecated.  Kernels should continue to support
+device trees with these nodes, but new device trees should not use them.
 
 Most of the bindings are from the common clock binding[1].
  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -82,7 +121,7 @@ Recommended properties:
 - reg: Should be the offset and length of clock block base address.
 	The length should be 4.
 
-Example for clock block and clock provider:
+Legacy Example:
 / {
 	clockgen: global-utilities@e1000 {
 		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
@@ -142,7 +181,7 @@ Example for clock block and clock provider:
 	};
 };
 
-Example for clock consumer:
+Example for legacy clock consumer:
 
 / {
 	cpu0: PowerPC,e5500@0 {

Documentation/devicetree/bindings/net/maxim,ds26522.txt

@@ -0,0 +1,13 @@
+* Maxim (Dallas) DS26522 Dual T1/E1/J1 Transceiver
+
+Required properties:
+- compatible: Should contain "maxim,ds26522".
+- reg: SPI CS.
+- spi-max-frequency: SPI clock.
+
+Example:
+	slic@1 {
+		compatible = "maxim,ds26522";
+		reg = <1>;
+		spi-max-frequency = <2000000>; /* input clock */
+	};

Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt

@@ -0,0 +1,21 @@
+Freescale MPC512x LocalPlus Bus FIFO (called SCLPC in the Reference Manual)
+
+Required properties:
+- compatible: should be "fsl,mpc512x-lpbfifo";
+- reg: should contain the offset and length of SCLPC register set;
+- interrupts: should contain the interrupt specifier for SCLPC; syntax of an
+    interrupt client node is described in interrupt-controller/interrupts.txt;
+- dmas: should contain the DMA specifier for SCLPC as described at
+    dma/dma.txt and dma/mpc512x-dma.txt;
+- dma-names: should be "rx-tx";
+
+Example:
+
+	sclpc@10100 {
+		compatible = "fsl,mpc512x-lpbfifo";
+		reg = <0x10100 0x50>;
+		interrupts = <7 0x8>;
+		dmas = <&dma0 26>;
+		dma-names = "rx-tx";
+	};
+

arch/powerpc/Kconfig

@@ -419,7 +419,7 @@ config PPC64_SUPPORTS_MEMORY_FAILURE
 
 config KEXEC
 	bool "kexec system call"
-	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
+	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) || PPC_BOOK3E
 	select KEXEC_CORE
 	help
 	  kexec is a system call that implements the ability to shutdown your

arch/powerpc/Makefile

@@ -157,8 +157,6 @@ CFLAGS-$(CONFIG_E500) += $(call cc-option,-mcpu=8540 -msoft-float,-mcpu=powerpc)
 endif
 endif
 
-CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell)
-
 asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1)
 
 KBUILD_CPPFLAGS	+= -Iarch/$(ARCH) $(asinstr)
@@ -288,6 +286,10 @@ PHONY += pseries_le_defconfig
 pseries_le_defconfig:
 	$(call merge_into_defconfig,pseries_defconfig,le)
 
+PHONY += ppc64le_defconfig
+ppc64le_defconfig:
+	$(call merge_into_defconfig,ppc64_defconfig,le)
+
 PHONY += mpc85xx_defconfig
 mpc85xx_defconfig:
 	$(call merge_into_defconfig,mpc85xx_basic_defconfig,\

arch/powerpc/boot/Makefile

@@ -364,6 +364,9 @@ $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 $(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
 
+$(obj)/cuImage.%: vmlinux $(obj)/fsl/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,cuboot-$*,,$(obj)/fsl/$*.dtb)
+
 $(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 	$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 

arch/powerpc/boot/dts/b4420qds.dts → arch/powerpc/boot/dts/fsl/b4420qds.dts

@@ -32,7 +32,7 @@
  * this software, even if advised of the possibility of such damage.
  */
 
-/include/ "fsl/b4420si-pre.dtsi"
+/include/ "b4420si-pre.dtsi"
 /include/ "b4qds.dtsi"
 
 / {
@@ -47,4 +47,4 @@
 
 };
 
-/include/ "fsl/b4420si-post.dtsi"
+/include/ "b4420si-post.dtsi"

arch/powerpc/boot/dts/fsl/b4420si-post.dtsi

@@ -89,7 +89,9 @@
 		compatible = "fsl,b4420-rcpm", "fsl,qoriq-rcpm-2.0";
 	};
 
-	L2: l2-cache-controller@c20000 {
+	L2_1: l2-cache-controller@c20000 {
 		compatible = "fsl,b4420-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
 	};
 };

arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi

@@ -1,7 +1,7 @@
 /*
  * B4420 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -54,8 +54,13 @@
 		dma0 = &dma0;
 		dma1 = &dma1;
 		sdhc = &sdhc;
-	};
 
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+	};
 
 	cpus {
 		#address-cells = <1>;
@@ -65,14 +70,14 @@
 			device_type = "cpu";
 			reg = <0 1>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 	};

arch/powerpc/boot/dts/b4860qds.dts → arch/powerpc/boot/dts/fsl/b4860qds.dts

@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/b4860si-pre.dtsi"
+/include/ "b4860si-pre.dtsi"
 /include/ "b4qds.dtsi"
 
 / {
@@ -58,4 +58,4 @@
 
 };
 
-/include/ "fsl/b4860si-post.dtsi"
+/include/ "b4860si-post.dtsi"

arch/powerpc/boot/dts/fsl/b4860si-post.dtsi

@@ -1,7 +1,7 @@
 /*
  * B4860 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2012 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -51,14 +51,12 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		cell-index = <1>;
-		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
 	};
 
 	port2 {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		cell-index = <2>;
-		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
 	};
 };
 
@@ -260,7 +258,27 @@
 		compatible = "fsl,b4860-rcpm", "fsl,qoriq-rcpm-2.0";
 	};
 
-	L2: l2-cache-controller@c20000 {
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+	fman@400000 {
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@ea000 {
+		};
+
+		enet6: ethernet@f0000 {
+		};
+
+		enet7: ethernet@f2000 {
+		};
+	};
+
+	L2_1: l2-cache-controller@c20000 {
 		compatible = "fsl,b4860-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
 	};
 };

arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi

@@ -1,7 +1,7 @@
 /*
  * B4860 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2012 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -54,6 +54,16 @@
 		dma0 = &dma0;
 		dma1 = &dma1;
 		sdhc = &sdhc;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
 	};
 
 
@@ -65,28 +75,28 @@
 			device_type = "cpu";
 			reg = <0 1>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu2: PowerPC,e6500@4 {
 			device_type = "cpu";
 			reg = <4 5>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu3: PowerPC,e6500@6 {
 			device_type = "cpu";
 			reg = <6 7>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 	};

arch/powerpc/boot/dts/b4qds.dtsi → arch/powerpc/boot/dts/fsl/b4qds.dtsi

@@ -229,4 +229,4 @@
 
 };
 
-/include/ "fsl/b4si-post.dtsi"
+/include/ "b4si-post.dtsi"