Table of Contents

• RSS2Email
• Installation
  • bash completion
• Feed Configuration
• Usage
• Daemon Mode
• Initial Run
• Assumptions
• Email Customization
  • Changing default From address
• Implementation Overview
• Logging Notes
• Github Setup

RSS2Email

This project began life as a naive port of the python-based r2e utility to golang.

Over time we've now gained a few more features:

• The ability to customize the email-templates which are generated and sent.
  • See email customization for details.
• The ability to send email via STMP, or via /usr/sbin/sendmail.
  • See SMTP-setup for details.
• The ability to include/exclude feed items from the emails.
  • For example receive emails only of feed items that contain the pattern "playstation".

Installation

If you have golang installed you can fetch, build, and install the latest binary by running:

go install github.com/skx/rss2email@latest

If you prefer you can also fetch our latest binary release from our release page.

To install from source simply clone the repository and build in the usual manner:

git clone https://github.com/skx/rss2email
cd rss2email
go build .
go install .

Finally you can find automatically generated docker images, these are built on a nightly basis, and when releases are made:

• https://github.com/skx/rss2email/pkgs/container/rss2email

Version NOTES:

• You'll need go version 1.21 or higher to build.
  • We use go embed to embed our (default) email-template within the binary, this was introduced with golang v1.17.
  • We use the slog logging package introduced with golang v1.21.
  • We use the fuzzing support which was introduced with golang v1.18 to test our configuration-file loading/parsing.
    • See configfile/FUZZING.md for details of using that.

bash completion

The binary has integrated support for TAB-completion, for bash. To enable this update your dotfiles to include the following:

source <(rss2email bash-completion)

Feed Configuration

Once you have installed the application you'll need to configure the feeds to monitor, this could be done by editing the configuration file:

• ~/.rss2email/feeds.txt

There are several built-in sub-commands for manipulating the feed-list, for example you can add a new feed to monitor via the add sub-command:

 $ rss2email add https://example.com/blog.rss

OPML files can be imported via the import sub-command:

 $ rss2email import feeds.opml

The list of feeds can be displayed via the list subcommand (note that adding the -verbose flag will fetch each of the feeds and that will be slow):

 $ rss2email list [-verbose]

Finally you can remove an entry from the feed-list via the delete sub-command:

 $ rss2email delete https://example.com/foo.rss

The configuration file in its simplest form is nothing more than a list of URLs, one per line. However there is also support for adding per-feed options:

   https://foo.example.com/
    - key:value
   https://foo.example.com/
    - key2:value2

This is documented and explained in the integrated help:

$ rss2email help config

Adding per-feed items allows excluding feed-entries by regular expression, for example this does what you'd expect:

   https://www.filfre.net/feed/rss/
    - exclude-title: The Analog Antiquarian

Usage

Once you've populated your feed list, via a series of rss2email add .. commands, or by editing the configuration file directly, you are now ready to actually launch the application.

To run the application, announcing all new feed-items by email to [email protected] you'd run this:

$ rss2email cron [email protected]

Once the feed-list has been fetched, and items processed, the application will terminate. It is expected that you'll add an entry to your crontab file to ensure this runs regularly. For example you might wish to run the check & email process once every 15 minutes, so you could add this:

 # Announce feed-changes via email four times an hour
 */15 * * * * $HOME/go/bin/rss2email cron [email protected]

When new items appear in the feeds they will then be sent to you via email. Each email will be multi-part, containing both text/plain and text/html versions of the new post(s). There is a default template which should contain the things you care about:

• A link to the item posted.
• The subject/title of the new feed item.
• The HTML and Text content of the new feed item.

If you wish you may customize the template which is used to generate the notification email, see email-customization for details. It is also possible to run in a daemon mode which will leave the process running forever, rather than terminating after walking the feeds once.

The state of feed-entries is recorded beneath ~/.rss2email/state.db, which is a boltdb database.

Daemon Mode

Typically you'd invoke rss2email with the cron sub-command as we documented above. This works in the naive way you'd expect:

• Read the contents of each URL in the feed-list.
• For each feed-item which is new generate and send an email.
• Terminate.

The daemon process does a similar thing, however it does not terminate. Instead the process becomes:

• Read the contents of each URL in the feed-list.
• For each feed-item which is new generate and send an email.
• Sleep for 15 minutes by default.
  • Set the SLEEP environmental variable if you wish to change this.
  • e.g. "export SLEEP=5" will cause a five minute delay between restarts.
• Begin the process once more.

In short the process runs forever, in the foreground. This is expected to be driven by docker or a systemd-service. Creating the appropriate configuration is left as an exercise, but you might examine the following two files for inspiration:

• Dockerfile
• docker-compose.yml

Initial Run

When you add a new feed all the items contained within that feed will initially be unseen/new, and this means you'll receive a flood of emails if you were to run:

 $ rss2email add https://blog.steve.fi/index.rss
 $ rss2email cron [email protected]

To avoid this you can use the -send=false flag, which will merely record each item as having been seen, rather than sending you emails:

 $ rss2email add https://blog.steve.fi/index.rss
 $ rss2email cron -send=false [email protected]

Assumptions

Because this application is so minimal there are a number of assumptions baked in:

• We assume that /usr/sbin/sendmail exists and will send email successfully.
  • You can cause emails to be sent via SMTP, see SMTP-setup for details.
• We assume the recipient and sender email addresses can be the same.
  • i.e. If you mail output to [email protected] that will be used as the sender address.
  • You can change the default sender via the email-customization process described next if you prefer though.

SMTP Setup

By default the outgoing emails we generate are piped to /usr/sbin/sendmail to be delivered. If that is unavailable, or unsuitable, you can instead configure things such that SMTP is used directly.

To configure SMTP you need to setup the following environmental-variables (environmental variables were selected as they're natural to use within Docker and systemd-service files).

Name	Example Value
SMTP_HOST	smtp.gmail.com
SMTP_PORT	587
SMTP_USERNAME	[email protected]
SMTP_PASSWORD	secret!value

If those values are present then SMTP will be used, otherwise the email will be sent via the local MTA.

Email Customization

By default the emails are sent using a template file which is embedded in the application. You can override the template by creating the file ~/.rss2email/email.tmpl, if that is present then it will be used instead of the default.

You can view the default template via the following command:

$ rss2email list-default-template

You can copy the default-template to the right location by running the following, before proceeding to edit it as you wish:

$ rss2email list-default-template > ~/.rss2email/email.tmpl

The default template contains a brief header documenting the available fields, and functions, which you can use. As the template uses the standard Golang text/template facilities you can be pretty creative with it!

If you're a developer who wishes to submit changes to the embedded version you should carry out the following two-step process to make your change.

• Edit template/template.txt, which is the source of the template.
• Rebuild the application to update the embedded copy.

NOTE: If you read the earlier section on configuration you'll see that it is possible to add per-feed configuration values to the config file. One of the supported options is to setup a feed-specific template-file.

Changing default From address

As noted earlier when sending the notification emails the recipient address is used as the sender-address too. There are no flags for changing the From: address used to send the emails, however using the section above you can use a customized email-template, and simply update the template to read something like this:

From: [email protected]
To: {{.To}}
Subject: [rss2email] {{.Subject}}
X-RSS-Link: {{.Link}}
X-RSS-Feed: {{.Feed}}

• i.e. Change the {{.From}} to your preferred sender-address.

Implementation Overview

The two main commands are cron and daemon and they work in roughly the same way:

• They instantiate processor/processor.go to run the logic
  • That walks over the list of feeds from configfile/configfile.go.
  • For each feed httpfetch/httpfetch.go is used to fetch the contents.
  • The result is a collection of *gofeed.Feed items, one for each entry in the remote feed.
    • These are wrapped via withstate/feeditem.go so we can test if they're new.
    • processor/emailer/emailer.go is used to send the email if necessary.
    • Either by SMTP or by executing /usr/sbin/sendmail

The other subcommands mostly just interact with the feed-list, via the use of configfile/configfile.go to add/delete/list the contents of the feed-list.

Logging Notes

The application is configured to use a common logger, which will output all messages to STDERR. The codebase will log messages at three levels:

• DEBUG
  • This will be used when new features are added, and contain implementation-related notices.
  • The messages here will be helpful for debugging, or extending the application.
• WARN
  • This level is shown by default.
  • This level is used for messages which are not fatal errors, but which a user might wish to be aware of.
    • For example failure to fetch a remote feed, or a count of retried HTTP-fetches.
• ERROR
  • This level is shown by default.
  • This level is used for fatal-errors.
  • This should only be used for messages which are immediately followed by an application exit.

There are several environmental variables which can be used to modify the logging output:

• LOG_ALL
  • If this is set to a non-empty string all levels will be shown (DEBUG, WARN and ERROR).
• LOG_FILE_PATH
  • The name of the file to duplicate logging message to, defaults to being rss2email.log.
• LOG_FILE_DISABLE
  • Set this to any non-empty value to disable the logfile entirely.
• LOG_JSON
  • If this is set to a non-empty string the logging messages will be output in JSON format.
  • This is useful if you're collecting (container) messages in datadog, loki, sumologic, or something similar.

Bot the cron and daemon sub-commands will switch to showing DEBUG messages if you supply the -verbose flag to them, which avoids the need for setting environmental variables.

Github Setup

This repository is configured to run tests upon every commit, and when pull-requests are created/updated. The testing is carried out via .github/run-tests.sh which is used by the github-action-tester action.

Releases are automated in a similar fashion via .github/build, and the github-action-publish-binaries action.

Steve