Merge branch 'ath-current' into ath-next

Commit 3c97f5d ("ath10k: implement NAPI support") conflicts with
ath-current. To avoid any merge problems merge ath-current to ath-next already now.

Conflicts:
	drivers/net/wireless/ath/ath10k/htt_rx.c

drivers/net/wireless/ath/ath10k/htt_rx.c

@@ -1520,7 +1520,7 @@ static void ath10k_htt_rx_h_filter(struct ath10k *ar,
 static int ath10k_htt_rx_handle_amsdu(struct ath10k_htt *htt)
 {
 	struct ath10k *ar = htt->ar;
-	static struct ieee80211_rx_status rx_status;
+	struct ieee80211_rx_status *rx_status = &htt->rx_status;
 	struct sk_buff_head amsdu;
 	int ret, num_msdus;
 
@@ -1545,11 +1545,11 @@ static int ath10k_htt_rx_handle_amsdu(struct ath10k_htt *htt)
 	}
 
 	num_msdus = skb_queue_len(&amsdu);
-	ath10k_htt_rx_h_ppdu(ar, &amsdu, &rx_status, 0xffff);
+	ath10k_htt_rx_h_ppdu(ar, &amsdu, rx_status, 0xffff);
 	ath10k_htt_rx_h_unchain(ar, &amsdu, ret > 0);
-	ath10k_htt_rx_h_filter(ar, &amsdu, &rx_status);
-	ath10k_htt_rx_h_mpdu(ar, &amsdu, &rx_status);
-	ath10k_htt_rx_h_deliver(ar, &amsdu, &rx_status);
+	ath10k_htt_rx_h_filter(ar, &amsdu, rx_status);
+	ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status);
+	ath10k_htt_rx_h_deliver(ar, &amsdu, rx_status);
 
 	return num_msdus;
 }

drivers/net/wireless/ath/ath10k/pci.c

@@ -3181,7 +3181,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		pci_hard_reset = ath10k_pci_qca988x_chip_reset;
 		break;
 	case QCA9887_1_0_DEVICE_ID:
-		dev_warn(&pdev->dev, "QCA9887 support is still experimental, there are likely bugs. You have been warned.\n");
 		hw_rev = ATH10K_HW_QCA9887;
 		pci_ps = false;
 		pci_soft_reset = ath10k_pci_warm_reset;

drivers/net/wireless/ath/ath9k/hw.c

@@ -2482,6 +2482,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 		return -EINVAL;
 	}
 
+	ath9k_gpio_cap_init(ah);
+
 	if (AR_SREV_9485(ah) ||
 	    AR_SREV_9285(ah) ||
 	    AR_SREV_9330(ah) ||
@@ -2531,8 +2533,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	else
 		pCap->hw_caps &= ~ATH9K_HW_CAP_HT;
 
-	ath9k_gpio_cap_init(ah);
-
 	if (AR_SREV_9160_10_OR_LATER(ah) || AR_SREV_9100(ah))
 		pCap->rts_aggr_limit = ATH_AMPDU_LIMIT_MAX;
 	else

drivers/net/wireless/ath/ath9k/main.c

@@ -718,9 +718,12 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	if (!ath_complete_reset(sc, false))
 		ah->reset_power_on = false;
 
-	if (ah->led_pin >= 0)
+	if (ah->led_pin >= 0) {
 		ath9k_hw_set_gpio(ah, ah->led_pin,
 				  (ah->config.led_active_high) ? 1 : 0);
+		ath9k_hw_gpio_request_out(ah, ah->led_pin, NULL,
+					  AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+	}
 
 	/*
 	 * Reset key cache to sane defaults (all entries cleared) instead of
@@ -864,9 +867,11 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 
 	spin_lock_bh(&sc->sc_pcu_lock);
 
-	if (ah->led_pin >= 0)
+	if (ah->led_pin >= 0) {
 		ath9k_hw_set_gpio(ah, ah->led_pin,
 				  (ah->config.led_active_high) ? 0 : 1);
+		ath9k_hw_gpio_request_in(ah, ah->led_pin, NULL);
+	}
 
 	ath_prepare_reset(sc);
 
@@ -1154,6 +1159,7 @@ void ath9k_calculate_summary_state(struct ath_softc *sc,
 		bool changed = (iter_data.primary_sta != ctx->primary_sta);
 
 		if (iter_data.primary_sta) {
+			iter_data.primary_beacon_vif = iter_data.primary_sta;
 			iter_data.beacons = true;
 			ath9k_set_assoc_state(sc, iter_data.primary_sta,
 					      changed);
@@ -1563,13 +1569,13 @@ static int ath9k_sta_state(struct ieee80211_hw *hw,
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	int ret = 0;
 
-	if (old_state == IEEE80211_STA_AUTH &&
-	    new_state == IEEE80211_STA_ASSOC) {
+	if (old_state == IEEE80211_STA_NOTEXIST &&
+	    new_state == IEEE80211_STA_NONE) {
 		ret = ath9k_sta_add(hw, vif, sta);
 		ath_dbg(common, CONFIG,
 			"Add station: %pM\n", sta->addr);
-	} else if (old_state == IEEE80211_STA_ASSOC &&
-		   new_state == IEEE80211_STA_AUTH) {
+	} else if (old_state == IEEE80211_STA_NONE &&
+		   new_state == IEEE80211_STA_NOTEXIST) {
 		ret = ath9k_sta_remove(hw, vif, sta);
 		ath_dbg(common, CONFIG,
 			"Remove station: %pM\n", sta->addr);

drivers/net/wireless/marvell/mwifiex/11n_aggr.c

@@ -205,7 +205,8 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
 
 	do {
 		/* Check if AMSDU can accommodate this MSDU */
-		if (skb_tailroom(skb_aggr) < (skb_src->len + LLC_SNAP_LEN))
+		if ((skb_aggr->len + skb_src->len + LLC_SNAP_LEN) >
+		    adapter->tx_buf_size)
 			break;
 
 		skb_src = skb_dequeue(&pra_list->skb_head);