update spec format

spec/controllers/address_controller_spec.rb

@@ -1,6 +1,6 @@
-require 'spec_helper'
+require 'rails_helper'
 
-describe AddressController do
+RSpec.describe AddressController, :type => :controller do
 
   describe "GET 'show'" do
     it "returns http success" do

spec/controllers/ram_map_controller_spec.rb

@@ -1,6 +1,6 @@
-require 'spec_helper'
+require 'rails_helper'
 
-describe RamMapController do
+RSpec.describe RamMapController, :type => :controller do
 
   describe "GET 'show'" do
     it "returns http success" do

spec/controllers/rom_info_controller_spec.rb

@@ -1,6 +1,6 @@
-require 'spec_helper'
+require 'rails_helper'
 
-describe RomInfoController do
+RSpec.describe RomInfoController, :type => :controller do
 
   describe "GET 'show'" do
     it "returns http success" do

spec/controllers/rom_map_controller_spec.rb

@@ -1,6 +1,6 @@
-require 'spec_helper'
+require 'rails_helper'
 
-describe RomMapController do
+RSpec.describe RomMapController, :type => :controller do
 
   describe "GET 'show'" do
     it "returns http success" do

spec/rails_helper.rb

@@ -0,0 +1,43 @@
+# This file is copied to spec/ when you run 'rails generate rspec:install'
+ENV["RAILS_ENV"] ||= 'test'
+require 'spec_helper'
+require File.expand_path("../../config/environment", __FILE__)
+require 'rspec/rails'
+
+# Requires supporting ruby files with custom matchers and macros, etc, in
+# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
+# run as spec files by default. This means that files in spec/support that end
+# in _spec.rb will both be required and run as specs, causing the specs to be
+# run twice. It is recommended that you do not name files matching this glob to
+# end with _spec.rb. You can configure this pattern with the --pattern
+# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
+Dir[Rails.root.join("spec/support/**/*.rb")].each { |f| require f }
+
+# Checks for pending migrations before tests are run.
+# If you are not using ActiveRecord, you can remove this line.
+#ActiveRecord::Migration.maintain_test_schema!
+
+RSpec.configure do |config|
+  # Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
+  #config.fixture_path = "#{::Rails.root}/spec/fixtures"
+
+  # If you're not using ActiveRecord, or you'd prefer not to run each of your
+  # examples within a transaction, remove the following line or assign false
+  # instead of true.
+  #config.use_transactional_fixtures = true
+
+  # RSpec Rails can automatically mix in different behaviours to your tests
+  # based on their file location, for example enabling you to call `get` and
+  # `post` in specs under `spec/controllers`.
+  #
+  # You can disable this behaviour by removing the line below, and instead
+  # explicitly tag your specs with their type, e.g.:
+  #
+  #     RSpec.describe UsersController, :type => :controller do
+  #       # ...
+  #     end
+  #
+  # The different available types are documented in the features, such as in
+  # https://relishapp.com/rspec/rspec-rails/docs
+  config.infer_spec_type_from_file_location!
+end

spec/spec_helper.rb

@@ -1,43 +1,76 @@
-# This file is copied to spec/ when you run 'rails generate rspec:install'
-ENV["RAILS_ENV"] ||= 'test'
-require File.expand_path("../../config/environment", __FILE__)
-require 'rspec/rails'
-require 'rspec/autorun'
-
-# Requires supporting ruby files with custom matchers and macros, etc, in
-# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
-# run as spec files by default. This means that files in spec/support that end
-# in _spec.rb will both be required and run as specs, causing the specs to be
-# run twice. It is recommended that you do not name files matching this glob to
-# end with _spec.rb. You can configure this pattern with with the --pattern
-# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
-Dir[Rails.root.join("spec/support/**/*.rb")].each { |f| require f }
-
+# This file was generated by the `rails generate rspec:install` command. Conventionally, all
+# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
+# The generated `.rspec` file contains `--require spec_helper` which will cause this
+# file to always be loaded, without a need to explicitly require it in any files.
+#
+# Given that it is always loaded, you are encouraged to keep this file as
+# light-weight as possible. Requiring heavyweight dependencies from this file
+# will add to the boot time of your test suite on EVERY test run, even for an
+# individual file that may not need all of that loaded. Instead, make a
+# separate helper file that requires this one and then use it only in the specs
+# that actually need it.
+#
+# The `.rspec` file also contains a few flags that are not defaults but that
+# users commonly want.
+#
+# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
 RSpec.configure do |config|
-  # ## Mock Framework
-  #
-  # If you prefer to use mocha, flexmock or RR, uncomment the appropriate line:
-  #
-  # config.mock_with :mocha
-  # config.mock_with :flexmock
-  # config.mock_with :rr
+  # The settings below are suggested to provide a good initial experience
+  # with RSpec, but feel free to customize to your heart's content.
+  # These two settings work together to allow you to limit a spec run
+  # to individual examples or groups you care about by tagging them with
+  # `:focus` metadata. When nothing is tagged with `:focus`, all examples
+  # get run.
+  config.filter_run :focus
+  config.run_all_when_everything_filtered = true
 
-  # Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
-  #config.fixture_path = "#{::Rails.root}/spec/fixtures"
+  # Many RSpec users commonly either run the entire suite or an individual
+  # file, and it's useful to allow more verbose output when running an
+  # individual spec file.
+  if config.files_to_run.one?
+    # Use the documentation formatter for detailed output,
+    # unless a formatter has already been configured
+    # (e.g. via a command-line flag).
+    config.default_formatter = 'doc'
+  end
 
-  # If you're not using ActiveRecord, or you'd prefer not to run each of your
-  # examples within a transaction, remove the following line or assign false
-  # instead of true.
-  #config.use_transactional_fixtures = true
-
-  # If true, the base class of anonymous controllers will be inferred
-  # automatically. This will be the default behavior in future versions of
-  # rspec-rails.
-  config.infer_base_class_for_anonymous_controllers = true
+  # Print the 10 slowest examples and example groups at the
+  # end of the spec run, to help surface which specs are running
+  # particularly slow.
+  config.profile_examples = 10
 
   # Run specs in random order to surface order dependencies. If you find an
   # order dependency and want to debug it, you can fix the order by providing
   # the seed, which is printed after each run.
   #     --seed 1234
-  config.order = "random"
+  config.order = :random
+
+  # Seed global randomization in this process using the `--seed` CLI option.
+  # Setting this allows you to use `--seed` to deterministically reproduce
+  # test failures related to randomization by passing the same `--seed` value
+  # as the one that triggered the failure.
+  Kernel.srand config.seed
+
+  # rspec-expectations config goes here. You can use an alternate
+  # assertion/expectation library such as wrong or the stdlib/minitest
+  # assertions if you prefer.
+  config.expect_with :rspec do |expectations|
+    # Enable only the newer, non-monkey-patching expect syntax.
+    # For more details, see:
+    #   - http://myronmars.to/n/dev-blog/2012/06/rspecs-new-expectation-syntax
+    expectations.syntax = :expect
+  end
+
+  # rspec-mocks config goes here. You can use an alternate test double
+  # library (such as bogus or mocha) by changing the `mock_with` option here.
+  config.mock_with :rspec do |mocks|
+    # Enable only the newer, non-monkey-patching expect syntax.
+    # For more details, see:
+    #   - http://teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
+    mocks.syntax = :expect
+
+    # Prevents you from mocking or stubbing a method that does not exist on
+    # a real object. This is generally recommended.
+    mocks.verify_partial_doubles = true
+  end
 end

spec/views/address/show.html.slim_spec.rb

@@ -1,5 +1,5 @@
-require 'spec_helper'
+require 'rails_helper'
 
-describe "address/show.html.slim" do
+RSpec.describe "address/show.html.slim", :type => :view do
   pending "add some examples to (or delete) #{__FILE__}"
 end

spec/views/ram_map/show.html.slim_spec.rb

@@ -1,5 +1,5 @@
-require 'spec_helper'
+require 'rails_helper'
 
-describe "ram_map/show.html.slim" do
+RSpec.describe "ram_map/show.html.slim", :type => :view do
   pending "add some examples to (or delete) #{__FILE__}"
 end

spec/views/rom_info/show.html.slim_spec.rb

@@ -1,5 +1,5 @@
-require 'spec_helper'
+require 'rails_helper'
 
-describe "rom_info/show.html.slim" do
+RSpec.describe "rom_info/show.html.slim", :type => :view do
   pending "add some examples to (or delete) #{__FILE__}"
 end

spec/views/rom_map/show.html.slim_spec.rb

@@ -1,5 +1,5 @@
-require 'spec_helper'
+require 'rails_helper'
 
-describe "rom_map/show.html.slim" do
+RSpec.describe "rom_map/show.html.slim", :type => :view do
   pending "add some examples to (or delete) #{__FILE__}"
 end