Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kern…

…el/git/soc/soc

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms. A bulk of this is smaller fixes
  or cleanups, but some of the new material this time around is:

   - Support for Nvidia Tegra234 SoC

   - Ring accelerator support for TI AM65x

   - PRUSS driver for TI platforms

   - Renesas support for R-Car V3U SoC

   - Reset support for Cortex-M4 processor on i.MX8MQ

  There are also new socinfo entries for a handful of different SoCs and
  platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
  drm/mediatek: reduce clear event
  soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
  soc: mediatek: cmdq: add jump function
  soc: mediatek: cmdq: add write_s_mask value function
  soc: mediatek: cmdq: add write_s value function
  soc: mediatek: cmdq: add read_s function
  soc: mediatek: cmdq: add write_s_mask function
  soc: mediatek: cmdq: add write_s function
  soc: mediatek: cmdq: add address shift in jump
  soc: mediatek: mtk-infracfg: Fix kerneldoc
  soc: amlogic: pm-domains: use always-on flag
  reset: sti: reset-syscfg: fix struct description warnings
  reset: imx7: add the cm4 reset for i.MX8MQ
  dt-bindings: reset: imx8mq: add m4 reset
  reset: Fix and extend kerneldoc
  reset: reset-zynqmp: Added support for Versal platform
  dt-bindings: reset: Updated binding for Versal reset driver
  reset: imx7: Support module build
  soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
  soc: fsl: qman: convert to use be32_add_cpu()
  ...

Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt

@@ -10,7 +10,8 @@ Required properties:
     "brcm,bcm7038-gisb-arb" for 130nm chips
 - reg: specifies the base physical address and size of the registers
 - interrupts: specifies the two interrupts (timeout and TEA) to be used from
-  the parent interrupt controller
+  the parent interrupt controller. A third optional interrupt may be specified
+  for breakpoints.
 
 Optional properties:
 

Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt

@@ -5,7 +5,7 @@ The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
 Mediatek SMI have two generations of HW architecture, here is the list
 which generation the SoCs use:
 generation 1: mt2701 and mt7623.
-generation 2: mt2712, mt6779, mt8173 and mt8183.
+generation 2: mt2712, mt6779, mt8167, mt8173 and mt8183.
 
 There's slight differences between the two SMI, for generation 2, the
 register which control the iommu port is at each larb's register base. But
@@ -20,6 +20,7 @@ Required properties:
 	"mediatek,mt2712-smi-common"
 	"mediatek,mt6779-smi-common"
 	"mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
+	"mediatek,mt8167-smi-common"
 	"mediatek,mt8173-smi-common"
 	"mediatek,mt8183-smi-common"
 - reg : the register and size of the SMI block.

Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt

@@ -8,6 +8,7 @@ Required properties:
 		"mediatek,mt2712-smi-larb"
 		"mediatek,mt6779-smi-larb"
 		"mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
+		"mediatek,mt8167-smi-larb"
 		"mediatek,mt8173-smi-larb"
 		"mediatek,mt8183-smi-larb"
 - reg : the register and size of this local arbiter.
@@ -22,7 +23,7 @@ Required properties:
   - "gals": the clock for GALS(Global Async Local Sync).
   Here is the list which has this GALS: mt8183.
 
-Required property for mt2701, mt2712, mt6779 and mt7623:
+Required property for mt2701, mt2712, mt6779, mt7623 and mt8167:
 - mediatek,larb-id :the hardware id of this larb.
 
 Example:

Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml

@@ -27,6 +27,7 @@ properties:
       - amlogic,meson8b-pwrc
       - amlogic,meson8m2-pwrc
       - amlogic,meson-gxbb-pwrc
+      - amlogic,meson-axg-pwrc
       - amlogic,meson-g12a-pwrc
       - amlogic,meson-sm1-pwrc
 
@@ -42,11 +43,11 @@ properties:
       - const: vapb
 
   resets:
-    minItems: 11
+    minItems: 5
     maxItems: 12
 
   reset-names:
-    minItems: 11
+    minItems: 5
     maxItems: 12
 
   "#power-domain-cells":
@@ -107,6 +108,24 @@ allOf:
         - resets
         - reset-names
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-axg-pwrc
+    then:
+      properties:
+        reset-names:
+          items:
+            - const: viu
+            - const: venc
+            - const: vcbus
+            - const: vencl
+            - const: vid_lock
+      required:
+        - resets
+        - reset-names
+
   - if:
       properties:
         compatible:

Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml

@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/brcm,bcm63xx-power.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: BCM63xx power domain driver
+
+maintainers:
+  - Álvaro Fernández Rojas <[email protected]>
+
+description: |
+  BCM6318, BCM6328, BCM6362 and BCM63268 SoCs have a power domain controller
+  to enable/disable certain components in order to save power.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm6318-power-controller
+          - brcm,bcm6328-power-controller
+          - brcm,bcm6362-power-controller
+          - brcm,bcm63268-power-controller
+
+  reg:
+    maxItems: 1
+
+  "#power-domain-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    periph_pwr: power-controller@10001848 {
+        compatible = "brcm,bcm6328-power-controller";
+        reg = <0x10001848 0x4>;
+        #power-domain-cells = <1>;
+    };

Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt

@@ -1,7 +1,7 @@
 --------------------------------------------------------------------------
- =  Zynq UltraScale+ MPSoC reset driver binding =
+ =  Zynq UltraScale+ MPSoC and Versal reset driver binding =
 --------------------------------------------------------------------------
-The Zynq UltraScale+ MPSoC has several different resets.
+The Zynq UltraScale+ MPSoC and Versal has several different resets.
 
 See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
 about zynqmp resets.
@@ -10,7 +10,8 @@ Please also refer to reset.txt in this directory for common reset
 controller binding usage.
 
 Required Properties:
-- compatible:	"xlnx,zynqmp-reset"
+- compatible:	"xlnx,zynqmp-reset" for Zynq UltraScale+ MPSoC platform
+		"xlnx,versal-reset" for Versal platform
 - #reset-cells:	Specifies the number of cells needed to encode reset
 		line, should be 1
 
@@ -37,8 +38,10 @@ Device nodes that need access to reset lines should
 specify them as a reset phandle in their corresponding node as
 specified in reset.txt.
 
-For list of all valid reset indicies see
+For list of all valid reset indices for Zynq UltraScale+ MPSoC see
 <dt-bindings/reset/xlnx-zynqmp-resets.h>
+For list of all valid reset indices for Versal see
+<dt-bindings/reset/xlnx-versal-resets.h>
 
 Example:
 

Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml

@@ -62,11 +62,6 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: TI-SCI device id of the ring accelerator
 
-  ti,dma-ring-reset-quirk:
-    $ref: /schemas/types.yaml#definitions/flag
-    description: |
-      enable ringacc/udma ring state interoperability issue software w/a
-
 required:
   - compatible
   - reg
@@ -94,7 +89,6 @@ examples:
             reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
             ti,num-rings = <818>;
             ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
-            ti,dma-ring-reset-quirk;
             ti,sci = <&dmsc>;
             ti,sci-dev-id = <187>;
             msi-parent = <&inta_main_udmass>;