Skip to content

Commit

Permalink
Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/a…
Browse files Browse the repository at this point in the history 
…rm/arm-soc

Board-level changes

This adds and extends support for specific boards on a number of
ARM platforms:  omap, imx, samsung, tegra, ...

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits)
  Enable 32 bit flash support for iMX21ADS board
  ARM: mx31pdk: Add MC13783 RTC support
  iomux-mx25: configuration to support CSPI3 on CSI pins
  MX1:apf9328: Add i2c support
  mioa701: add newly available DoC G3 chip
  arm/tegra: remove __initdata annotation from pinmux tables
  arm/tegra: Use bus notifiers to trigger pinmux setup
  arm/tegra: Refactor board-*-pinmux.c to share code
  arm/tegra: Fix mistake in Trimslice's pinmux
  arm/tegra: Rework Seaboard-vs-Ventana pinmux table
  arm/tegra: Remove useless entries from ventana_pinmux[]
  arm/tegra: PCIe: Remove include of mach/pinmux.h
  arm/tegra: Harmony PCIe: Don't touch pinmux
  arm/tegra: Add AUXDATA for tegra-pinmux and tegra-gpio
  arm/tegra: Split Seaboard GPIO table to allow for Ventana
  ARM: imx6q: generate imx6q dtb files
  arm/imx6q: Rename Sabreauto to Armadillo2
  arm/imx6q-sabrelite: add enet phy ksz9021rn fixup
  arm/imx6: add imx6q sabrelite board support
  dts/imx: rename uart labels to consistent with hw spec
  ...
  • Loading branch information
@torvalds
torvalds committed Jan 9, 2012
2 parents 7400c12 + 421b759 commit 6d889d0
Show file tree
Hide file tree
Showing 52 changed files with 872 additions and 282 deletions.
8 changes: 6 additions & 2 deletions Documentation/devicetree/bindings/arm/fsl.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -21,6 +21,10 @@ i.MX53 Smart Mobile Reference Design Board
Required root node properties:
- compatible = "fsl,imx53-smd", "fsl,imx53";

i.MX6 Quad SABRE Automotive Board
i.MX6 Quad Armadillo2 Board
Required root node properties:
- compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
- compatible = "fsl,imx6q-arm2", "fsl,imx6q";

i.MX6 Quad SABRE Lite Board
Required root node properties:
- compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
17 changes: 8 additions & 9 deletions arch/arm/boot/dts/imx51-babbage.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -35,20 +35,19 @@
};

esdhc@70008000 { /* ESDHC2 */
cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
cd-gpios = <&gpio1 6 0>;
wp-gpios = <&gpio1 5 0>;
status = "okay";
};

uart2: uart@7000c000 { /* UART3 */
uart3: uart@7000c000 {
fsl,uart-has-rtscts;
status = "okay";
};

ecspi@70010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
<&gpio3 25 0>; /* GPIO4_25 */
cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
status = "okay";

pmic: mc13892@0 {
Expand All @@ -57,7 +56,7 @@
compatible = "fsl,mc13892";
spi-max-frequency = <6000000>;
reg = <0>;
mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */
mc13xxx-irq-gpios = <&gpio1 8 0>;
fsl,mc13xxx-uses-regulator;
};

Expand Down Expand Up @@ -91,12 +90,12 @@
reg = <0x73fa8000 0x4000>;
};

uart0: uart@73fbc000 {
uart1: uart@73fbc000 {
fsl,uart-has-rtscts;
status = "okay";
};

uart1: uart@73fc0000 {
uart2: uart@73fc0000 {
status = "okay";
};
};
Expand Down Expand Up @@ -127,7 +126,7 @@

power {
label = "Power Button";
gpios = <&gpio1 21 0>;
gpios = <&gpio2 21 0>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
Expand Down
20 changes: 10 additions & 10 deletions arch/arm/boot/dts/imx51.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -14,9 +14,9 @@

/ {
aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
};

tzic: tz-interrupt-controller@e0000000 {
Expand Down Expand Up @@ -86,7 +86,7 @@
status = "disabled";
};

uart2: uart@7000c000 { /* UART3 */
uart3: uart@7000c000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x7000c000 0x4000>;
interrupts = <33>;
Expand Down Expand Up @@ -117,7 +117,7 @@
};
};

gpio0: gpio@73f84000 { /* GPIO1 */
gpio1: gpio@73f84000 {
compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
reg = <0x73f84000 0x4000>;
interrupts = <50 51>;
Expand All @@ -127,7 +127,7 @@
#interrupt-cells = <1>;
};

gpio1: gpio@73f88000 { /* GPIO2 */
gpio2: gpio@73f88000 {
compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
reg = <0x73f88000 0x4000>;
interrupts = <52 53>;
Expand All @@ -137,7 +137,7 @@
#interrupt-cells = <1>;
};

gpio2: gpio@73f8c000 { /* GPIO3 */
gpio3: gpio@73f8c000 {
compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
reg = <0x73f8c000 0x4000>;
interrupts = <54 55>;
Expand All @@ -147,7 +147,7 @@
#interrupt-cells = <1>;
};

gpio3: gpio@73f90000 { /* GPIO4 */
gpio4: gpio@73f90000 {
compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
reg = <0x73f90000 0x4000>;
interrupts = <56 57>;
Expand All @@ -171,14 +171,14 @@
status = "disabled";
};

uart0: uart@73fbc000 {
uart1: uart@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
status = "disabled";
};

uart1: uart@73fc0000 {
uart2: uart@73fc0000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fc0000 0x4000>;
interrupts = <32>;
Expand Down
18 changes: 9 additions & 9 deletions arch/arm/boot/dts/imx53-ard.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -29,8 +29,8 @@
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
cd-gpios = <&gpio0 1 0>; /* GPIO1_1 */
wp-gpios = <&gpio0 9 0>; /* GPIO1_9 */
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
status = "okay";
};
};
Expand All @@ -44,7 +44,7 @@
reg = <0x53fa8000 0x4000>;
};

uart0: uart@53fbc000 { /* UART1 */
uart1: uart@53fbc000 {
status = "okay";
};
};
Expand All @@ -67,7 +67,7 @@
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0xf4000000 0x2000000>;
phy-mode = "mii";
interrupt-parent = <&gpio1>;
interrupt-parent = <&gpio2>;
interrupts = <31>;
reg-io-width = <4>;
smsc,irq-push-pull;
Expand All @@ -79,34 +79,34 @@

home {
label = "Home";
gpios = <&gpio4 10 0>; /* GPIO5_10 */
gpios = <&gpio5 10 0>;
linux,code = <102>; /* KEY_HOME */
gpio-key,wakeup;
};

back {
label = "Back";
gpios = <&gpio4 11 0>; /* GPIO5_11 */
gpios = <&gpio5 11 0>;
linux,code = <158>; /* KEY_BACK */
gpio-key,wakeup;
};

program {
label = "Program";
gpios = <&gpio4 12 0>; /* GPIO5_12 */
gpios = <&gpio5 12 0>;
linux,code = <362>; /* KEY_PROGRAM */
gpio-key,wakeup;
};

volume-up {
label = "Volume Up";
gpios = <&gpio4 13 0>; /* GPIO5_13 */
gpios = <&gpio5 13 0>;
linux,code = <115>; /* KEY_VOLUMEUP */
};

volume-down {
label = "Volume Down";
gpios = <&gpio3 0 0>; /* GPIO4_0 */
gpios = <&gpio4 0 0>;
linux,code = <114>; /* KEY_VOLUMEDOWN */
};
};
Expand Down
17 changes: 8 additions & 9 deletions arch/arm/boot/dts/imx53-evk.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -29,15 +29,14 @@
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
wp-gpios = <&gpio2 14 0>; /* GPIO3_14 */
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio3 14 0>;
status = "okay";
};

ecspi@50010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
<&gpio2 19 0>; /* GPIO3_19 */
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";

flash: at45db321d@1 {
Expand All @@ -61,8 +60,8 @@
};

esdhc@50020000 { /* ESDHC3 */
cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
status = "okay";
};
};
Expand All @@ -76,7 +75,7 @@
reg = <0x53fa8000 0x4000>;
};

uart0: uart@53fbc000 { /* UART1 */
uart1: uart@53fbc000 {
status = "okay";
};
};
Expand All @@ -102,7 +101,7 @@

fec@63fec000 {
phy-mode = "rmii";
phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
};
Expand All @@ -113,7 +112,7 @@

green {
label = "Heartbeat";
gpios = <&gpio6 7 0>; /* GPIO7_7 */
gpios = <&gpio7 7 0>;
linux,default-trigger = "heartbeat";
};
};
Expand Down
18 changes: 9 additions & 9 deletions arch/arm/boot/dts/imx53-qsb.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -29,13 +29,13 @@
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
cd-gpios = <&gpio3 13 0>;
status = "okay";
};

esdhc@50020000 { /* ESDHC3 */
cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
status = "okay";
};
};
Expand All @@ -49,7 +49,7 @@
reg = <0x53fa8000 0x4000>;
};

uart0: uart@53fbc000 { /* UART1 */
uart1: uart@53fbc000 {
status = "okay";
};
};
Expand Down Expand Up @@ -84,7 +84,7 @@

fec@63fec000 {
phy-mode = "rmii";
phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
};
Expand All @@ -95,20 +95,20 @@

power {
label = "Power Button";
gpios = <&gpio0 8 0>; /* GPIO1_8 */
gpios = <&gpio1 8 0>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};

volume-up {
label = "Volume Up";
gpios = <&gpio1 14 0>; /* GPIO2_14 */
gpios = <&gpio2 14 0>;
linux,code = <115>; /* KEY_VOLUMEUP */
};

volume-down {
label = "Volume Down";
gpios = <&gpio1 15 0>; /* GPIO2_15 */
gpios = <&gpio2 15 0>;
linux,code = <114>; /* KEY_VOLUMEDOWN */
};
};
Expand All @@ -118,7 +118,7 @@

user {
label = "Heartbeat";
gpios = <&gpio6 7 0>; /* GPIO7_7 */
gpios = <&gpio7 7 0>;
linux,default-trigger = "heartbeat";
};
};
Expand Down
Loading

0 comments on commit 6d889d0

Please sign in to comment.