video: fbdev: Replace HTTP links with HTTPS ones

Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
fracktal · Jul 20, 2020 · 7c7b2a3 · 7c7b2a3
1 parent b0487e0
commit 7c7b2a3
Show file tree

Hide file tree

Showing 14 changed files with 19 additions and 19 deletions.
diff --git a/Documentation/fb/ep93xx-fb.rst b/Documentation/fb/ep93xx-fb.rst
@@ -127,7 +127,7 @@ At least on the EP9315 there is a silicon bug which causes bit 27 of
 the VIDSCRNPAGE (framebuffer physical offset) to be tied low. There is
 an unofficial errata for this bug at::
 
-	http://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2
+	https://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2
 
 By default the EP93xx framebuffer driver checks if the allocated physical
 address has bit 27 set. If it does, then the memory is freed and an

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
@@ -824,7 +824,7 @@ config FB_OPENCORES
 	  systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.
 
 	  The source code and specification for the core is available at
-	  <http://opencores.org/project,vga_lcd>
+	  <https://opencores.org/project,vga_lcd>
 
 config FB_S1D13XXX
 	tristate "Epson S1D13XXX framebuffer support"
@@ -835,7 +835,7 @@ config FB_S1D13XXX
 	help
 	  Support for S1D13XXX framebuffer device family (currently only
 	  working with S1D13806). Product specs at
-	  <http://vdc.epson.com/>
+	  <https://vdc.epson.com/>
 
 config FB_ATMEL
 	tristate "AT91 LCD Controller support"
@@ -1193,7 +1193,7 @@ config FB_RADEON
 	  don't need to choose this to run the Radeon in plain VGA mode.
 
 	  There is a product page at
-	  http://products.amd.com/en-us/GraphicCardResult.aspx
+	  https://products.amd.com/en-us/GraphicCardResult.aspx
 
 config FB_RADEON_I2C
 	bool "DDC/I2C for ATI Radeon support"
@@ -1361,7 +1361,7 @@ config FB_SIS
 	help
 	  This is the frame buffer device driver for the SiS 300, 315, 330
 	  and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
-	  Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
+	  Specs available at <https://www.sis.com> and <http://www.xgitech.com>.
 
 	  To compile this driver as a module, choose M here; the module
 	  will be called sisfb.

diff --git a/drivers/video/fbdev/core/fbmon.c b/drivers/video/fbdev/core/fbmon.c
@@ -19,7 +19,7 @@
  * Generalized Timing Formula is derived from:
  *
  *      GTF Spreadsheet by Andy Morrish (1/5/97)
- *      available at http://www.vesa.org
+ *      available at https://www.vesa.org
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file COPYING in the main directory of this archive
@@ -1201,7 +1201,7 @@ static void fb_timings_dclk(struct __fb_timings *timings)
  * ignored and @var will be filled with the calculated timings.
  *
  * All calculations are based on the VESA GTF Spreadsheet
- * available at VESA's public ftp (http://www.vesa.org).
+ * available at VESA's public ftp (https://www.vesa.org).
  *
  * NOTES:
  * The timings generated by the GTF will be different from VESA

diff --git a/drivers/video/fbdev/ep93xx-fb.c b/drivers/video/fbdev/ep93xx-fb.c
@@ -430,7 +430,7 @@ static int ep93xxfb_alloc_videomem(struct fb_info *info)
 	/*
 	 * There is a bug in the ep93xx framebuffer which causes problems
 	 * if bit 27 of the physical address is set.
-	 * See: http://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2
+	 * See: https://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2
 	 * There does not seem to be any official errata for this, but I
 	 * have confirmed the problem exists on my hardware (ep9315) at
 	 * least.

diff --git a/drivers/video/fbdev/grvga.c b/drivers/video/fbdev/grvga.c
@@ -5,7 +5,7 @@
  * 2011 (c) Aeroflex Gaisler AB
  *
  * Full documentation of the core can be found here:
- * http://www.gaisler.com/products/grlib/grip.pdf
+ * https://www.gaisler.com/products/grlib/grip.pdf
  *
  * Contributors: Kristoffer Glembo <[email protected]>
  */

diff --git a/drivers/video/fbdev/macfb.c b/drivers/video/fbdev/macfb.c
@@ -478,7 +478,7 @@ static int macfb_setcolreg(unsigned regno, unsigned red, unsigned green,
 			break;
 		/*
 		 * 24-bit colour almost doesn't exist on 68k Macs --
-		 * http://support.apple.com/kb/TA28634 (Old Article: 10992)
+		 * https://support.apple.com/kb/TA28634 (Old Article: 10992)
 		 */
 		case 24:
 		case 32:

diff --git a/drivers/video/fbdev/metronomefb.c b/drivers/video/fbdev/metronomefb.c
@@ -10,7 +10,7 @@
  * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
  *
  * This work was made possible by help and equipment support from E-Ink
- * Corporation. http://www.eink.com/
+ * Corporation. https://www.eink.com/
  *
  * This driver is written to be used with the Metronome display controller.
  * It is intended to be architecture independent. A board specific driver

diff --git a/drivers/video/fbdev/omap2/omapfb/dss/Kconfig b/drivers/video/fbdev/omap2/omapfb/dss/Kconfig
@@ -60,7 +60,7 @@ config FB_OMAP5_DSS_HDMI
 	select FB_OMAP2_DSS_HDMI_COMMON
 	help
 	  HDMI Interface for OMAP5 and similar cores. This adds the High
-	  Definition Multimedia Interface. See http://www.hdmi.org/ for HDMI
+	  Definition Multimedia Interface. See https://www.hdmi.org/ for HDMI
 	  specification.
 
 config FB_OMAP2_DSS_SDI
@@ -79,7 +79,7 @@ config FB_OMAP2_DSS_DSI
 	  DSI is a high speed half-duplex serial interface between the host
 	  processor and a peripheral, such as a display or a framebuffer chip.
 
-	  See http://www.mipi.org/ for DSI specifications.
+	  See https://www.mipi.org/ for DSI specifications.
 
 config FB_OMAP2_DSS_MIN_FCK_PER_PCK
 	int "Minimum FCK/PCK ratio (for scaling)"

diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi.h b/drivers/video/fbdev/omap2/omapfb/dss/hdmi.h
@@ -2,7 +2,7 @@
 /*
  * HDMI driver definition for TI OMAP4 Processor.
  *
- * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #ifndef _HDMI_H

diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * HDMI interface DSS driver for TI's OMAP4 family of SoCs.
- * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com/
  * Authors: Yong Zhi
  *	Mythri pk <[email protected]>
  */

diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c
@@ -3,7 +3,7 @@
  * ti_hdmi_4xxx_ip.c
  *
  * HDMI TI81xx, TI38xx, TI OMAP4 etc IP driver Library
- * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com/
  * Authors: Yong Zhi
  *	Mythri pk <[email protected]>
  */

diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.h b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.h
@@ -2,7 +2,7 @@
 /*
  * HDMI header definition for OMAP4 HDMI core IP
  *
- * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #ifndef _HDMI4_CORE_H_

diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.h b/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.h
@@ -2,7 +2,7 @@
 /*
  * HDMI driver definition for TI OMAP5 processors.
  *
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #ifndef _HDMI5_CORE_H_

diff --git a/drivers/video/fbdev/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c
@@ -18,7 +18,7 @@
  * Clean patches should be sent to the ARM Linux Patch System.  Please see the
  * following web page for more information:
  *
- *	http://www.arm.linux.org.uk/developer/patches/info.shtml
+ *	https://www.arm.linux.org.uk/developer/patches/info.shtml
  *
  * Thank you.
  *