Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
irqchip: Add Qualcomm MPM controller driver
Qualcomm SoCs based on the RPM architecture have a MSM Power Manager (MPM) in always-on domain. In addition to managing resources during sleep, the hardware also has an interrupt controller that monitors the interrupts when the system is asleep, wakes up the APSS when one of these interrupts occur and replays it to GIC after it becomes operational. It adds an irqchip driver for this interrupt controller, and here are some notes about it. - For given SoC, a fixed number of MPM pins are supported, e.g. 96 pins on QCM2290. Each of these MPM pins can be either a MPM_GIC pin or a MPM_GPIO pin. The mapping between MPM_GIC pin and GIC interrupt is defined by SoC, as well as the mapping between MPM_GPIO pin and GPIO number. The former mapping is retrieved from device tree, while the latter is defined in TLMM pinctrl driver. - The power domain (PD) .power_off hook is used to notify RPM that APSS is about to power collapse. This requires MPM PD be the parent PD of CPU cluster. - When SoC gets awake from sleep mode, the driver will receive an interrupt from RPM, so that it can replay interrupt for particular polarity. Signed-off-by: Shawn Guo <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
- Loading branch information