ARM: OMAP2+: omap_device: fix idling of devices during probe

On the GTA04A5 od->_driver_status was not set to BUS_NOTIFY_BIND_DRIVER
during probe of the second mmc used for wifi. Therefore
omap_device_late_idle idled the device during probing causing oopses when
accessing the registers.

It was not set because od->_state was set to OMAP_DEVICE_STATE_IDLE
in the notifier callback. Therefore set od->_driver_status also in that
case.

This came apparent after commit 21b2cec ("mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4") causing this
oops:

omap_hsmmc 480b4000.mmc: omap_device_late_idle: enabled but no driver.  Idling
8<--- cut here ---
Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0b402c
...
(omap_hsmmc_set_bus_width) from [<c07996bc>] (omap_hsmmc_set_ios+0x11c/0x258)
(omap_hsmmc_set_ios) from [<c077b2b0>] (mmc_power_up.part.8+0x3c/0xd0)
(mmc_power_up.part.8) from [<c077c14c>] (mmc_start_host+0x88/0x9c)
(mmc_start_host) from [<c077d284>] (mmc_add_host+0x58/0x84)
(mmc_add_host) from [<c0799190>] (omap_hsmmc_probe+0x5fc/0x8c0)
(omap_hsmmc_probe) from [<c0666728>] (platform_drv_probe+0x48/0x98)
(platform_drv_probe) from [<c066457c>] (really_probe+0x1dc/0x3b4)

Fixes: 04abaf0 ("ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer")
Fixes: 21b2cec ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
Acked-by: Ulf Hansson <[email protected]>
Signed-off-by: Andreas Kemnade <[email protected]>
[[email protected]: left out extra parens, trimmed description stack trace]
Signed-off-by: Tony Lindgren <[email protected]>

arch/arm/mach-omap2/omap_device.c

@@ -230,10 +230,12 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 		break;
 	case BUS_NOTIFY_BIND_DRIVER:
 		od = to_omap_device(pdev);
-		if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED) &&
-		    pm_runtime_status_suspended(dev)) {
+		if (od) {
 			od->_driver_status = BUS_NOTIFY_BIND_DRIVER;
-			pm_runtime_set_active(dev);
+			if (od->_state == OMAP_DEVICE_STATE_ENABLED &&
+			    pm_runtime_status_suspended(dev)) {
+				pm_runtime_set_active(dev);
+			}
 		}
 		break;
 	case BUS_NOTIFY_ADD_DEVICE: