ARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM…

…_THUMBEE

Currently when ThumbEE is not enabled (!CONFIG_ARM_THUMBEE) the ThumbEE
register states are not saved/restored at context switch. The default state
of the ThumbEE Ctrl register (TEECR) allows userspace accesses to the
ThumbEE Base Handler register (TEEHBR). This can cause unexpected behaviour
when people use ThumbEE on !CONFIG_ARM_THUMBEE kernels, as well as allowing
covert communication - eg between userspace tasks running inside chroot
jails.

This patch sets up TEECR in order to prevent user-space access to TEEHBR
when !CONFIG_ARM_THUMBEE. In this case, tasks are sent SIGILL if they try to
access TEEHBR.

Cc: [email protected]
Reviewed-by: Will Deacon <[email protected]>
Signed-off-by: Jonathan Austin <[email protected]>
Signed-off-by: Russell King <[email protected]>

arch/arm/mm/proc-v7.S

@@ -254,6 +254,18 @@ __v7_setup:
 	ldr	r6, =NMRR			@ NMRR
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
+#endif
+#ifndef CONFIG_ARM_THUMBEE
+	mrc	p15, 0, r0, c0, c1, 0		@ read ID_PFR0 for ThumbEE
+	and	r0, r0, #(0xf << 12)		@ ThumbEE enabled field
+	teq	r0, #(1 << 12)			@ check if ThumbEE is present
+	bne	1f
+	mov	r5, #0
+	mcr	p14, 6, r5, c1, c0, 0		@ Initialize TEEHBR to 0
+	mrc	p14, 6, r0, c0, c0, 0		@ load TEECR
+	orr	r0, r0, #1			@ set the 1st bit in order to
+	mcr	p14, 6, r0, c0, c0, 0		@ stop userspace TEEHBR access
+1:
 #endif
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}