Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

1) ICMP sockets leave err uninitialized but we try to return it for the
   unsupported MSG_OOB case, reported by Dave Jones.

2) Add new Zaurus device ID entries, from Dave Jones.

3) Pointer calculation in hso driver memset is wrong, from Dan
   Carpenter.

4) ks8851_probe() checks unsigned value as negative, fix also from Dan
   Carpenter.

5) Fix crashes in atl1c driver due to TX queue handling, from Eric
   Dumazet.  I anticipate some TX side locking fixes coming in the near
   future for this driver as well.

6) The inline directive fix in Bluetooth which was breaking the build
   only with very new versions of GCC, from Johan Hedberg.

7) Fix crashes in the ATP CLIP code due to ARP cleanups this merge
   window, reported by Meelis Roos and fixed by Eric Dumazet.

8) JME driver doesn't flush RX FIFO correctly, from Guo-Fu Tseng.

9) Some ip6_route_output() callers test the return value for NULL, but
   this never happens as the convention is to return a dst entry with
   dst->error set.  Fixes from RonQing Li.

10) Logitech Harmony 900 should be handled by zaurus driver not
   cdc_ether, update white lists and black lists accordingly.  From
   Scott Talbert.

11) Receiving from certain kinds of devices there won't be a MAC header,
   so there is no MAC header to fixup in the IPSEC code, and if we try
   to do it we'll crash.  Fix from Eric Dumazet.

12) Port type array indexing off-by-one in mlx4 driver, fix from Yevgeny
   Petrilin.

13) Fix regression in link-down handling in davinci_emac which causes
   all RX descriptors to be freed up and therefore RX to wedge
   completely, from Christian Riesch.

14) It took two attempts, but ctnetlink soft lockups seem to be
   cured now, from Pablo Neira Ayuso.

15) Endianness bug fix in ENIC driver, from Santosh Nayak.

16) The long ago conversion of the PPP fragmentation code over to
   abstracted SKB list handling wasn't perfect, once we get an
   out of sequence SKB we don't flush the rest of them like we
   should.  From Ben McKeegan.

17) Fix regression of ->ip_summed initialization in sfc driver.
   From Ben Hutchings.

18) Bluetooth timeout mistakenly using msecs instead of jiffies,
   from Andrzej Kaczmarek.

19) Using _sync variant of work cancellation results in deadlocks,
   use the non _sync variants instead.  From Andre Guedes.

20) Bluetooth rfcomm code had reference counting problems leading
   to crashes, fix from Octavian Purdila.

21) The conversion of netem over to classful qdisc handling added
   two bugs to netem_dequeue(), fixes from Eric Dumazet.

22) Missing pci_iounmap() in ATM Solos driver.  Fix from Julia Lawall.

23) b44_pci_exit() should not have __exit tag since it's invoked from
   non-__exit code.  From Nikola Pajkovsky.

24) The conversion of the neighbour hash tables over to RCU added a
   race, fixed here by adding the necessary reread of tbl->nht, fix
   from Michel Machado.

25) When we added VF (virtual function) attributes for network device
   dumps, this potentially bloats up the size of the dump of one
   network device such that the dump size is too large for the buffer
   allocated by properly written netlink applications.

   In particular, if you add 255 VFs to a network device, parts of
   GLIBC stop working.

   To fix this, we add an attribute that is used to turn on these
   extended portions of the network device dump.  Sophisticaed
   applications like 'ip' that want to see this stuff  will be changed
   to set the attribute, whereas things like GLIBC that don't care
   about VFs simply will not, and therefore won't be busted by the
   mere presence of VFs on a network device.

   Thanks to the tireless work of Greg Rose on this fix.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits)
  sfc: Fix assignment of ip_summed for pre-allocated skbs
  ppp: fix 'ppp_mp_reconstruct bad seq' errors
  enic: Fix endianness bug.
  gre: fix spelling in comments
  netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2)
  Revert "netfilter: ctnetlink: fix soft lockup when netlink adds new entries"
  davinci_emac: Do not free all rx dma descriptors during init
  mlx4_core: Fixing array indexes when setting port types
  phy: IC+101G and PHY_HAS_INTERRUPT flag
  netdev/phy/icplus: Correct broken phy_init code
  ipsec: be careful of non existing mac headers
  Move Logitech Harmony 900 from cdc_ether to zaurus
  hso: memsetting wrong data in hso_get_count()
  netfilter: ip6_route_output() never returns NULL.
  ethernet/broadcom: ip6_route_output() never returns NULL.
  ipv6: ip6_route_output() never returns NULL.
  jme: Fix FIFO flush issue
  atm: clip: remove clip_tbl
  ipv4: ping: Fix recvmsg MSG_OOB error handling.
  rtnetlink: Fix problem with buffer allocation
  ...

drivers/atm/solos-pci.c

@@ -1206,9 +1206,9 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
  out_unmap_both:
 	pci_set_drvdata(dev, NULL);
-	pci_iounmap(dev, card->config_regs);
- out_unmap_config:
 	pci_iounmap(dev, card->buffers);
+ out_unmap_config:
+	pci_iounmap(dev, card->config_regs);
  out_release_regions:
 	pci_release_regions(dev);
  out:

drivers/bluetooth/btusb.c

@@ -102,6 +102,7 @@ static struct usb_device_id btusb_table[] = {
 
 	/* Broadcom BCM20702A0 */
 	{ USB_DEVICE(0x0a5c, 0x21e3) },
+	{ USB_DEVICE(0x0a5c, 0x21f3) },
 	{ USB_DEVICE(0x413c, 0x8197) },
 
 	{ }	/* Terminating entry */
@@ -726,9 +727,6 @@ static int btusb_send_frame(struct sk_buff *skb)
 		usb_fill_bulk_urb(urb, data->udev, pipe,
 				skb->data, skb->len, btusb_tx_complete, skb);
 
-		if (skb->priority >= HCI_PRIO_MAX - 1)
-			urb->transfer_flags  = URB_ISO_ASAP;
-
 		hdev->stat.acl_tx++;
 		break;
 

drivers/net/can/sja1000/sja1000.c

@@ -95,11 +95,16 @@ static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val)
 	spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
 }
 
+static int sja1000_is_absent(struct sja1000_priv *priv)
+{
+	return (priv->read_reg(priv, REG_MOD) == 0xFF);
+}
+
 static int sja1000_probe_chip(struct net_device *dev)
 {
 	struct sja1000_priv *priv = netdev_priv(dev);
 
-	if (priv->reg_base && (priv->read_reg(priv, 0) == 0xFF)) {
+	if (priv->reg_base && sja1000_is_absent(priv)) {
 		printk(KERN_INFO "%s: probing @0x%lX failed\n",
 		       DRV_NAME, dev->base_addr);
 		return 0;
@@ -493,6 +498,9 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 	while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
 		n++;
 		status = priv->read_reg(priv, REG_SR);
+		/* check for absent controller due to hw unplug */
+		if (status == 0xFF && sja1000_is_absent(priv))
+			return IRQ_NONE;
 
 		if (isrc & IRQ_WUI)
 			dev_warn(dev->dev.parent, "wakeup interrupt\n");
@@ -509,6 +517,9 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 			while (status & SR_RBS) {
 				sja1000_rx(dev);
 				status = priv->read_reg(priv, REG_SR);
+				/* check for absent controller */
+				if (status == 0xFF && sja1000_is_absent(priv))
+					return IRQ_NONE;
 			}
 		}
 		if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) {

drivers/net/ethernet/atheros/atl1c/atl1c_main.c

@@ -2244,10 +2244,6 @@ static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb,
 			dev_info(&adapter->pdev->dev, "tx locked\n");
 		return NETDEV_TX_LOCKED;
 	}
-	if (skb->mark == 0x01)
-		type = atl1c_trans_high;
-	else
-		type = atl1c_trans_normal;
 
 	if (atl1c_tpd_avail(adapter, type) < tpd_req) {
 		/* no enough descriptor, just stop queue */

drivers/net/ethernet/broadcom/b44.c

@@ -2339,7 +2339,7 @@ static inline int __init b44_pci_init(void)
 	return err;
 }
 
-static inline void __exit b44_pci_exit(void)
+static inline void b44_pci_exit(void)
 {
 #ifdef CONFIG_B44_PCI
 	ssb_pcihost_unregister(&b44_pci_driver);

drivers/net/ethernet/broadcom/cnic.c

@@ -3584,7 +3584,11 @@ static int cnic_get_v6_route(struct sockaddr_in6 *dst_addr,
 		fl6.flowi6_oif = dst_addr->sin6_scope_id;
 
 	*dst = ip6_route_output(&init_net, NULL, &fl6);
-	if (*dst)
+	if ((*dst)->error) {
+		dst_release(*dst);
+		*dst = NULL;
+		return -ENETUNREACH;
+	} else
 		return 0;
 #endif
 

drivers/net/ethernet/cisco/enic/cq_enet_desc.h

@@ -157,7 +157,7 @@ static inline void cq_enet_rq_desc_dec(struct cq_enet_rq_desc *desc,
 			CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK) ? 1 : 0;
 		*fcoe_enc_error = (desc->flags &
 			CQ_ENET_RQ_DESC_FCOE_ENC_ERROR) ? 1 : 0;
-		*fcoe_eof = (u8)((desc->checksum_fcoe >>
+		*fcoe_eof = (u8)((le16_to_cpu(desc->checksum_fcoe) >>
 			CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT) &
 			CQ_ENET_RQ_DESC_FCOE_EOF_MASK);
 		*checksum = 0;

drivers/net/ethernet/cisco/enic/enic_pp.c

@@ -72,7 +72,7 @@ static int enic_set_port_profile(struct enic *enic, int vf)
 	struct enic_port_profile *pp;
 	struct vic_provinfo *vp;
 	const u8 oui[3] = VIC_PROVINFO_CISCO_OUI;
-	const u16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX);
+	const __be16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX);
 	char uuid_str[38];
 	char client_mac_str[18];
 	u8 *client_mac;

drivers/net/ethernet/jme.c

@@ -2328,19 +2328,11 @@ jme_change_mtu(struct net_device *netdev, int new_mtu)
 		((new_mtu) < IPV6_MIN_MTU))
 		return -EINVAL;
 
-	if (new_mtu > 4000) {
-		jme->reg_rxcs &= ~RXCS_FIFOTHNP;
-		jme->reg_rxcs |= RXCS_FIFOTHNP_64QW;
-		jme_restart_rx_engine(jme);
-	} else {
-		jme->reg_rxcs &= ~RXCS_FIFOTHNP;
-		jme->reg_rxcs |= RXCS_FIFOTHNP_128QW;
-		jme_restart_rx_engine(jme);
-	}
 
 	netdev->mtu = new_mtu;
 	netdev_update_features(netdev);
 
+	jme_restart_rx_engine(jme);
 	jme_reset_link(jme);
 
 	return 0;

drivers/net/ethernet/jme.h

@@ -730,7 +730,7 @@ enum jme_rxcs_values {
 	RXCS_RETRYCNT_60	= 0x00000F00,
 
 	RXCS_DEFAULT		= RXCS_FIFOTHTP_128T |
-				  RXCS_FIFOTHNP_128QW |
+				  RXCS_FIFOTHNP_16QW |
 				  RXCS_DMAREQSZ_128B |
 				  RXCS_RETRYGAP_256ns |
 				  RXCS_RETRYCNT_32,

drivers/net/ethernet/mellanox/mlx4/eq.c

@@ -1036,7 +1036,7 @@ int mlx4_assign_eq(struct mlx4_dev *dev, char* name, int * vector)
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	int vec = 0, err = 0, i;
 
-	spin_lock(&priv->msix_ctl.pool_lock);
+	mutex_lock(&priv->msix_ctl.pool_lock);
 	for (i = 0; !vec && i < dev->caps.comp_pool; i++) {
 		if (~priv->msix_ctl.pool_bm & 1ULL << i) {
 			priv->msix_ctl.pool_bm |= 1ULL << i;
@@ -1058,7 +1058,7 @@ int mlx4_assign_eq(struct mlx4_dev *dev, char* name, int * vector)
 			eq_set_ci(&priv->eq_table.eq[vec], 1);
 		}
 	}
-	spin_unlock(&priv->msix_ctl.pool_lock);
+	mutex_unlock(&priv->msix_ctl.pool_lock);
 
 	if (vec) {
 		*vector = vec;
@@ -1079,13 +1079,13 @@ void mlx4_release_eq(struct mlx4_dev *dev, int vec)
 	if (likely(i >= 0)) {
 		/*sanity check , making sure were not trying to free irq's
 		  Belonging to a legacy EQ*/
-		spin_lock(&priv->msix_ctl.pool_lock);
+		mutex_lock(&priv->msix_ctl.pool_lock);
 		if (priv->msix_ctl.pool_bm & 1ULL << i) {
 			free_irq(priv->eq_table.eq[vec].irq,
 				 &priv->eq_table.eq[vec]);
 			priv->msix_ctl.pool_bm &= ~(1ULL << i);
 		}
-		spin_unlock(&priv->msix_ctl.pool_lock);
+		mutex_unlock(&priv->msix_ctl.pool_lock);
 	}
 
 }

drivers/net/ethernet/mellanox/mlx4/main.c

@@ -531,15 +531,14 @@ int mlx4_change_port_types(struct mlx4_dev *dev,
 	for (port = 0; port <  dev->caps.num_ports; port++) {
 		/* Change the port type only if the new type is different
 		 * from the current, and not set to Auto */
-		if (port_types[port] != dev->caps.port_type[port + 1]) {
+		if (port_types[port] != dev->caps.port_type[port + 1])
 			change = 1;
-			dev->caps.port_type[port + 1] = port_types[port];
-		}
 	}
 	if (change) {
 		mlx4_unregister_device(dev);
 		for (port = 1; port <= dev->caps.num_ports; port++) {
 			mlx4_CLOSE_PORT(dev, port);
+			dev->caps.port_type[port] = port_types[port - 1];
 			err = mlx4_SET_PORT(dev, port);
 			if (err) {
 				mlx4_err(dev, "Failed to set port %d, "
@@ -986,6 +985,9 @@ static int map_bf_area(struct mlx4_dev *dev)
 	resource_size_t bf_len;
 	int err = 0;
 
+	if (!dev->caps.bf_reg_size)
+		return -ENXIO;
+
 	bf_start = pci_resource_start(dev->pdev, 2) +
 			(dev->caps.num_uars << PAGE_SHIFT);
 	bf_len = pci_resource_len(dev->pdev, 2) -
@@ -1825,7 +1827,7 @@ static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto err_master_mfunc;
 
 	priv->msix_ctl.pool_bm = 0;
-	spin_lock_init(&priv->msix_ctl.pool_lock);
+	mutex_init(&priv->msix_ctl.pool_lock);
 
 	mlx4_enable_msi_x(dev);
 	if ((mlx4_is_mfunc(dev)) &&

drivers/net/ethernet/mellanox/mlx4/mlx4.h

@@ -697,7 +697,7 @@ struct mlx4_sense {
 
 struct mlx4_msix_ctl {
 	u64		pool_bm;
-	spinlock_t	pool_lock;
+	struct mutex	pool_lock;
 };
 
 struct mlx4_steer {

drivers/net/ethernet/micrel/ks8851_mll.c

@@ -1545,7 +1545,7 @@ static int __devinit ks8851_probe(struct platform_device *pdev)
 
 	netdev->irq = platform_get_irq(pdev, 0);
 
-	if (netdev->irq < 0) {
+	if ((int)netdev->irq < 0) {
 		err = netdev->irq;
 		goto err_get_irq;
 	}

drivers/net/ethernet/sfc/rx.c

@@ -156,11 +156,10 @@ static int efx_init_rx_buffers_skb(struct efx_rx_queue *rx_queue)
 		if (unlikely(!skb))
 			return -ENOMEM;
 
-		/* Adjust the SKB for padding and checksum */
+		/* Adjust the SKB for padding */
 		skb_reserve(skb, NET_IP_ALIGN);
 		rx_buf->len = skb_len - NET_IP_ALIGN;
 		rx_buf->is_page = false;
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 		rx_buf->dma_addr = pci_map_single(efx->pci_dev,
 						  skb->data, rx_buf->len,
@@ -496,6 +495,7 @@ static void efx_rx_packet_gro(struct efx_channel *channel,
 
 		EFX_BUG_ON_PARANOID(!checksummed);
 		rx_buf->u.skb = NULL;
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 		gro_result = napi_gro_receive(napi, skb);
 	}

drivers/net/ethernet/ti/davinci_emac.c

@@ -1009,7 +1009,7 @@ static void emac_rx_handler(void *token, int len, int status)
 	int			ret;
 
 	/* free and bail if we are shutting down */
-	if (unlikely(!netif_running(ndev) || !netif_carrier_ok(ndev))) {
+	if (unlikely(!netif_running(ndev))) {
 		dev_kfree_skb_any(skb);
 		return;
 	}
@@ -1038,7 +1038,9 @@ static void emac_rx_handler(void *token, int len, int status)
 recycle:
 	ret = cpdma_chan_submit(priv->rxchan, skb, skb->data,
 			skb_tailroom(skb), GFP_KERNEL);
-	if (WARN_ON(ret < 0))
+
+	WARN_ON(ret == -ENOMEM);
+	if (unlikely(ret < 0))
 		dev_kfree_skb_any(skb);
 }