Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM fixes from Russell King:
 "Nothing too disasterous, the biggest thing being the removal of the
  regulator support for vcore in the AMBA driver; only one SoC was using
  this and it got broken during the last merge window, which then
  started causing problems for other people.  Mutual agreement was
  reached for it to be removed."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7386/1: jump_label: fixup for rename to static_key
  ARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEE
  ARM: 7382/1: mm: truncate memory banks to fit in 4GB space for classic MMU
  ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus
  ARM: 7383/1: nommu: populate vectors page from paging_init
  ARM: 7381/1: nommu: fix typo in mm/Kconfig
  ARM: 7380/1: DT: do not add a zero-sized memory property
  ARM: 7379/1: DT: fix atags_to_fdt() second call site
  ARM: 7366/3: amba: Remove AMBA level regulator support
  ARM: 7377/1: vic: re-read status register before dispatching each IRQ handler
  ARM: 7368/1: fault.c: correct how the tsk->[maj|min]_flt gets incremented

arch/arm/boot/compressed/atags_to_fdt.c

@@ -77,6 +77,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 		} else if (atag->hdr.tag == ATAG_MEM) {
 			if (memcount >= sizeof(mem_reg_property)/4)
 				continue;
+			if (!atag->u.mem.size)
+				continue;
 			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
 			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
 		} else if (atag->hdr.tag == ATAG_INITRD2) {

arch/arm/boot/compressed/head.S

@@ -273,7 +273,7 @@ restart:	adr	r0, LC0
 		add	r0, r0, #0x100
 		mov	r1, r6
 		sub	r2, sp, r6
-		blne	atags_to_fdt
+		bleq	atags_to_fdt
 
 		ldmfd	sp!, {r0-r3, ip, lr}
 		sub	sp, sp, #0x10000

arch/arm/common/vic.c

@@ -427,19 +427,18 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
 
 /*
  * Handle each interrupt in a single VIC.  Returns non-zero if we've
- * handled at least one interrupt.  This does a single read of the
- * status register and handles all interrupts in order from LSB first.
+ * handled at least one interrupt.  This reads the status register
+ * before handling each interrupt, which is necessary given that
+ * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
  */
 static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
 {
 	u32 stat, irq;
 	int handled = 0;
 
-	stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
-	while (stat) {
+	while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
 		irq = ffs(stat) - 1;
 		handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
-		stat &= ~(1 << irq);
 		handled = 1;
 	}
 

arch/arm/include/asm/jump_label.h

@@ -14,7 +14,7 @@
 #define JUMP_LABEL_NOP	"nop"
 #endif
 
-static __always_inline bool arch_static_branch(struct jump_label_key *key)
+static __always_inline bool arch_static_branch(struct static_key *key)
 {
 	asm goto("1:\n\t"
 		 JUMP_LABEL_NOP "\n\t"

arch/arm/kernel/setup.c

@@ -523,7 +523,21 @@ int __init arm_add_memory(phys_addr_t start, unsigned long size)
 	 */
 	size -= start & ~PAGE_MASK;
 	bank->start = PAGE_ALIGN(start);
-	bank->size  = size & PAGE_MASK;
+
+#ifndef CONFIG_LPAE
+	if (bank->start + size < bank->start) {
+		printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
+			"32-bit physical address space\n", (long long)start);
+		/*
+		 * To ensure bank->start + bank->size is representable in
+		 * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB.
+		 * This means we lose a page after masking.
+		 */
+		size = ULONG_MAX - bank->start;
+	}
+#endif
+
+	bank->size = size & PAGE_MASK;
 
 	/*
 	 * Check whether this memory region has non-zero size or

arch/arm/kernel/smp_twd.c

@@ -118,10 +118,14 @@ static int twd_cpufreq_transition(struct notifier_block *nb,
 	 * The twd clock events must be reprogrammed to account for the new
 	 * frequency.  The timer is local to a cpu, so cross-call to the
 	 * changing cpu.
+	 *
+	 * Only wait for it to finish, if the cpu is active to avoid
+	 * deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during
+	 * booting of that cpu.
 	 */
 	if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
 		smp_call_function_single(freqs->cpu, twd_update_frequency,
-			NULL, 1);
+					 NULL, cpu_active(freqs->cpu));
 
 	return NOTIFY_OK;
 }

arch/arm/mm/Kconfig

@@ -723,7 +723,7 @@ config CPU_HIGH_VECTOR
 	bool "Select the High exception vector"
 	help
 	  Say Y here to select high exception vector(0xFFFF0000~).
-	  The exception vector can be vary depending on the platform
+	  The exception vector can vary depending on the platform
 	  design in nommu mode. If your platform needs to select
 	  high exception vector, say Y.
 	  Otherwise or if you are unsure, say N, and the low exception

arch/arm/mm/fault.c

@@ -320,7 +320,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	 */
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
-	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+	if (!(fault & VM_FAULT_ERROR) && flags & FAULT_FLAG_ALLOW_RETRY) {
 		if (fault & VM_FAULT_MAJOR) {
 			tsk->maj_flt++;
 			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,

arch/arm/mm/nommu.c

@@ -13,6 +13,7 @@
 #include <asm/sections.h>
 #include <asm/page.h>
 #include <asm/setup.h>
+#include <asm/traps.h>
 #include <asm/mach/arch.h>
 
 #include "mm.h"
@@ -39,6 +40,7 @@ void __init sanity_check_meminfo(void)
  */
 void __init paging_init(struct machine_desc *mdesc)
 {
+	early_trap_init((void *)CONFIG_VECTORS_BASE);
 	bootmem_init();
 }
 

arch/arm/mm/proc-v7.S

@@ -254,6 +254,18 @@ __v7_setup:
 	ldr	r6, =NMRR			@ NMRR
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
+#endif
+#ifndef CONFIG_ARM_THUMBEE
+	mrc	p15, 0, r0, c0, c1, 0		@ read ID_PFR0 for ThumbEE
+	and	r0, r0, #(0xf << 12)		@ ThumbEE enabled field
+	teq	r0, #(1 << 12)			@ check if ThumbEE is present
+	bne	1f
+	mov	r5, #0
+	mcr	p14, 6, r5, c1, c0, 0		@ Initialize TEEHBR to 0
+	mrc	p14, 6, r0, c0, c0, 0		@ load TEECR
+	orr	r0, r0, #1			@ set the 1st bit in order to
+	mcr	p14, 6, r0, c0, c0, 0		@ stop userspace TEEHBR access
+1:
 #endif
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}

drivers/amba/bus.c

@@ -247,8 +247,7 @@ static int amba_pm_restore(struct device *dev)
 /*
  * Hooks to provide runtime PM of the pclk (bus clock).  It is safe to
  * enable/disable the bus clock at runtime PM suspend/resume as this
- * does not result in loss of context.  However, disabling vcore power
- * would do, so we leave that to the driver.
+ * does not result in loss of context.
  */
 static int amba_pm_runtime_suspend(struct device *dev)
 {
@@ -354,39 +353,6 @@ static void amba_put_disable_pclk(struct amba_device *pcdev)
 	clk_put(pclk);
 }
 
-static int amba_get_enable_vcore(struct amba_device *pcdev)
-{
-	struct regulator *vcore = regulator_get(&pcdev->dev, "vcore");
-	int ret;
-
-	pcdev->vcore = vcore;
-
-	if (IS_ERR(vcore)) {
-		/* It is OK not to supply a vcore regulator */
-		if (PTR_ERR(vcore) == -ENODEV)
-			return 0;
-		return PTR_ERR(vcore);
-	}
-
-	ret = regulator_enable(vcore);
-	if (ret) {
-		regulator_put(vcore);
-		pcdev->vcore = ERR_PTR(-ENODEV);
-	}
-
-	return ret;
-}
-
-static void amba_put_disable_vcore(struct amba_device *pcdev)
-{
-	struct regulator *vcore = pcdev->vcore;
-
-	if (!IS_ERR(vcore)) {
-		regulator_disable(vcore);
-		regulator_put(vcore);
-	}
-}
-
 /*
  * These are the device model conversion veneers; they convert the
  * device model structures to our more specific structures.
@@ -399,10 +365,6 @@ static int amba_probe(struct device *dev)
 	int ret;
 
 	do {
-		ret = amba_get_enable_vcore(pcdev);
-		if (ret)
-			break;
-
 		ret = amba_get_enable_pclk(pcdev);
 		if (ret)
 			break;
@@ -420,7 +382,6 @@ static int amba_probe(struct device *dev)
 		pm_runtime_put_noidle(dev);
 
 		amba_put_disable_pclk(pcdev);
-		amba_put_disable_vcore(pcdev);
 	} while (0);
 
 	return ret;
@@ -442,7 +403,6 @@ static int amba_remove(struct device *dev)
 	pm_runtime_put_noidle(dev);
 
 	amba_put_disable_pclk(pcdev);
-	amba_put_disable_vcore(pcdev);
 
 	return ret;
 }

drivers/mfd/db8500-prcmu.c

@@ -2788,6 +2788,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
 		.constraints = {
 			.name = "db8500-vape",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = true,
 		},
 		.consumer_supplies = db8500_vape_consumers,
 		.num_consumer_supplies = ARRAY_SIZE(db8500_vape_consumers),

drivers/spi/spi-pl022.c

@@ -2195,7 +2195,6 @@ static int pl022_runtime_suspend(struct device *dev)
 	struct pl022 *pl022 = dev_get_drvdata(dev);
 
 	clk_disable(pl022->clk);
-	amba_vcore_disable(pl022->adev);
 
 	return 0;
 }
@@ -2204,7 +2203,6 @@ static int pl022_runtime_resume(struct device *dev)
 {
 	struct pl022 *pl022 = dev_get_drvdata(dev);
 
-	amba_vcore_enable(pl022->adev);
 	clk_enable(pl022->clk);
 
 	return 0;

include/linux/amba/bus.h

@@ -30,7 +30,6 @@ struct amba_device {
 	struct device		dev;
 	struct resource		res;
 	struct clk		*pclk;
-	struct regulator	*vcore;
 	u64			dma_mask;
 	unsigned int		periphid;
 	unsigned int		irq[AMBA_NR_IRQS];
@@ -75,12 +74,6 @@ void amba_release_regions(struct amba_device *);
 #define amba_pclk_disable(d)	\
 	do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0)
 
-#define amba_vcore_enable(d)	\
-	(IS_ERR((d)->vcore) ? 0 : regulator_enable((d)->vcore))
-
-#define amba_vcore_disable(d)	\
-	do { if (!IS_ERR((d)->vcore)) regulator_disable((d)->vcore); } while (0)
-
 /* Some drivers don't use the struct amba_device */
 #define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff)
 #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f)