- Update Xen patches to 3.19-rc5 and c/s 1276.

- config.conf: Re-enable Xen configs.
- Update config files.

suse-commit: 9368e4c36c51ffa058bd2a543417b38fb51d94e2

.gitignore

@@ -96,3 +96,6 @@ x509.genkey
 
 # Kconfig presets
 all.config
+
+# Kdevelop4
+*.kdev4

.mailmap

@@ -17,7 +17,7 @@ Aleksey Gorelov <[email protected]>
 Al Viro <[email protected]>
 Al Viro <[email protected]>
 Andreas Herrmann <[email protected]>
-Andrew Morton <akpm@osdl.org>
+Andrew Morton <akpm@linux-foundation.org>
 Andrew Vasquez <[email protected]>
 Andy Adamson <[email protected]>
 Archit Taneja <[email protected]>
@@ -51,6 +51,7 @@ Greg Kroah-Hartman <[email protected]>
 Greg Kroah-Hartman <[email protected]>
 Henk Vergonet <[email protected]>
 Henrik Kretzschmar <[email protected]>
+Henrik Rydberg <[email protected]>
 Herbert Xu <[email protected]>
 Jacob Shin <[email protected]>
 James Bottomley <jejb@mulgrave.(none)>
@@ -102,6 +103,8 @@ Rudolf Marek <[email protected]>
 Rui Saraiva <[email protected]>
 Sachin P Sant <[email protected]>
 Sam Ravnborg <[email protected]>
+Santosh Shilimkar <[email protected]>
+Santosh Shilimkar <[email protected]>
 Sascha Hauer <[email protected]>
 S.Çağlar Onur <[email protected]>
 Shiraz Hashim <[email protected]> <[email protected]>

CREDITS

@@ -1197,6 +1197,13 @@ S: R. Tocantins, 89 - Cristo Rei
 S: 80050-430 - Curitiba - Paraná
 S: Brazil
 
+N: Oded Gabbay
+E: [email protected]
+D: AMD KFD maintainer
+S: 12 Shraga Raphaeli
+S: Petah-Tikva, 4906418
+S: Israel
+
 N: Kumar Gala
 E: [email protected]
 D: Embedded PowerPC 6xx/7xx/74xx/82xx/83xx/85xx support
@@ -1727,14 +1734,14 @@ S: Chapel Hill, North Carolina 27514-4818
 S: USA
 
 N: Dave Jones
-E: davej@redhat.com
+E: davej@codemonkey.org.uk
 W: http://www.codemonkey.org.uk
 D: Assorted VIA x86 support.
 D: 2.5 AGPGART overhaul.
 D: CPUFREQ maintenance.
-D: Fedora kernel maintenance.
+D: Fedora kernel maintenance (2003-2014).
+D: 'Trinity' and similar fuzz testing work.
 D: Misc/Other.
-S: 314 Littleton Rd, Westford, MA 01886, USA
 
 N: Martin Josfsson
 E: [email protected]

Documentation/ABI/stable/sysfs-bus-usb

@@ -32,10 +32,9 @@ Date:		January 2008
 KernelVersion:	2.6.25
 Contact:	Sarah Sharp <[email protected]>
 Description:
-		If CONFIG_PM_RUNTIME is enabled then this file
-		is present.  When read, it returns the total time (in msec)
-		that the USB device has been connected to the machine.  This
-		file is read-only.
+		If CONFIG_PM is enabled, then this file is present.  When read,
+		it returns the total time (in msec) that the USB device has been
+		connected to the machine.  This file is read-only.
 Users:
 		PowerTOP <[email protected]>
 		https://01.org/powertop/
@@ -45,10 +44,9 @@ Date:		January 2008
 KernelVersion:	2.6.25
 Contact:	Sarah Sharp <[email protected]>
 Description:
-		If CONFIG_PM_RUNTIME is enabled then this file
-		is present.  When read, it returns the total time (in msec)
-		that the USB device has been active, i.e. not in a suspended
-		state.  This file is read-only.
+		If CONFIG_PM is enabled, then this file is present.  When read,
+		it returns the total time (in msec) that the USB device has been
+		active, i.e. not in a suspended state.  This file is read-only.
 
 		Tools can use this file and the connected_duration file to
 		compute the percentage of time that a device has been active.

Documentation/ABI/stable/sysfs-class-udc

@@ -0,0 +1,93 @@
+What:		/sys/class/udc/<udc>/a_alt_hnp_support
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <[email protected]>
+Description:
+		Indicates if an OTG A-Host supports HNP at an alternate port.
+Users:
+
+What:		/sys/class/udc/<udc>/a_hnp_support
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <[email protected]>
+Description:
+		Indicates if an OTG A-Host supports HNP at this port.
+Users:
+
+What:		/sys/class/udc/<udc>/b_hnp_enable
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <[email protected]>
+Description:
+		Indicates if an OTG A-Host enabled HNP support.
+Users:
+
+What:		/sys/class/udc/<udc>/current_speed
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <[email protected]>
+Description:
+		Indicates the current negotiated speed at this port.
+Users:
+
+What:		/sys/class/udc/<udc>/is_a_peripheral
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <[email protected]>
+Description:
+		Indicates that this port is the default Host on an OTG session
+		but HNP was used to switch roles.
+Users:
+
+What:		/sys/class/udc/<udc>/is_otg
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <[email protected]>
+Description:
+		Indicates that this port support OTG.
+Users:
+
+What:		/sys/class/udc/<udc>/maximum_speed
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <[email protected]>
+Description:
+		Indicates the maximum USB speed supported by this port.
+Users:
+
+What:		/sys/class/udc/<udc>/maximum_speed
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <[email protected]>
+Description:
+		Indicates the maximum USB speed supported by this port.
+Users:
+
+What:		/sys/class/udc/<udc>/soft_connect
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <[email protected]>
+Description:
+		Allows users to disconnect data pullup resistors thus causing a
+		logical disconnection from the USB Host.
+Users:
+
+What:		/sys/class/udc/<udc>/srp
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <[email protected]>
+Description:
+		Allows users to manually start Session Request Protocol.
+Users:
+
+What:		/sys/class/udc/<udc>/state
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <[email protected]>
+Description:
+		Indicates current state of the USB Device Controller. Valid
+		states are: 'not-attached', 'attached', 'powered',
+		'reconnecting', 'unauthenticated', 'default', 'addressed',
+		'configured', and 'suspended'; however not all USB Device
+		Controllers support reporting all states.
+Users:

Documentation/ABI/stable/sysfs-driver-ib_srp

@@ -55,12 +55,12 @@ Description:	Interface for making ib_srp connect to a new target.
 		  only safe with partial memory descriptor list support enabled
 		  (allow_ext_sg=1).
 		* comp_vector, a number in the range 0..n-1 specifying the
-		  MSI-X completion vector. Some HCA's allocate multiple (n)
-		  MSI-X vectors per HCA port. If the IRQ affinity masks of
-		  these interrupts have been configured such that each MSI-X
-		  interrupt is handled by a different CPU then the comp_vector
-		  parameter can be used to spread the SRP completion workload
-		  over multiple CPU's.
+		  MSI-X completion vector of the first RDMA channel. Some
+		  HCA's allocate multiple (n) MSI-X vectors per HCA port. If
+		  the IRQ affinity masks of these interrupts have been
+		  configured such that each MSI-X interrupt is handled by a
+		  different CPU then the comp_vector parameter can be used to
+		  spread the SRP completion workload over multiple CPU's.
 		* tl_retry_count, a number in the range 2..7 specifying the
 		  IB RC retry count.
 		* queue_size, the maximum number of commands that the
@@ -88,13 +88,26 @@ Description:	Whether ib_srp is allowed to include a partial memory
 		descriptor list in an SRP_CMD when communicating with an SRP
 		target.
 
+What:		/sys/class/scsi_host/host<n>/ch_count
+Date:		April 1, 2015
+KernelVersion:	3.19
+Contact:	[email protected]
+Description:	Number of RDMA channels used for communication with the SRP
+		target.
+
 What:		/sys/class/scsi_host/host<n>/cmd_sg_entries
 Date:		May 19, 2011
 KernelVersion:	2.6.39
 Contact:	[email protected]
 Description:	Maximum number of data buffer descriptors that may be sent to
 		the target in a single SRP_CMD request.
 
+What:		/sys/class/scsi_host/host<n>/comp_vector
+Date:		September 2, 2013
+KernelVersion:	3.11
+Contact:	[email protected]
+Description:	Completion vector used for the first RDMA channel.
+
 What:		/sys/class/scsi_host/host<n>/dgid
 Date:		June 17, 2006
 KernelVersion:	2.6.17

Documentation/ABI/testing/configfs-usb-gadget-hid

@@ -0,0 +1,11 @@
+What:		/config/usb-gadget/gadget/functions/hid.name
+Date:		Nov 2014
+KernelVersion:	3.19
+Description:
+		The attributes:
+
+		protocol	- HID protocol to use
+		report_desc	- blob corresponding to HID report descriptors
+				except the data passed through /dev/hidg<N>
+		report_length	- HID report length
+		subclass	- HID device subclass to use

Documentation/ABI/testing/configfs-usb-gadget-midi

@@ -0,0 +1,12 @@
+What:		/config/usb-gadget/gadget/functions/midi.name
+Date:		Nov 2014
+KernelVersion:	3.19
+Description:
+		The attributes:
+
+		index		- index value for the USB MIDI adapter
+		id		- ID string for the USB MIDI adapter
+		buflen		- MIDI buffer length
+		qlen		- USB read request queue length
+		in_ports	- number of MIDI input ports
+		out_ports	- number of MIDI output ports

Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10

@@ -0,0 +1,24 @@
+What:		/sys/bus/coresight/devices/<memory_map>.etb/enable_sink
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(RW) Add/remove a sink from a trace path.  There can be multiple
+		source for a single sink.
+		ex: echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/status
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) List various control and status registers.  The specific
+		layout and content is driver specific.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/trigger_cntr
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(RW) Disables write access to the Trace RAM by stopping the
+		formatter after a defined number of words have been stored
+		following the trigger event. The number of 32-bit words written
+		into the Trace RAM following the trigger event is equal to the
+		value stored in this register+1 (from ARM ETB-TRM).