Skip to content

Tools and documentation for hacking on the Ensoniq Mirage 8-bit sampler

License

Notifications You must be signed in to change notification settings

gordonjcp/miragetools

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

title layout
Ensoniq Mirage Tools
default

Ensoniq Mirage Tools

Tools and documentation for hacking on the Ensoniq Mirage 8-bit sampler

There should be just about enough information in the README.md files to get you started. You're going to need a PC running Linux that has a real genuine floppy drive (no USB ones, sorry) and a MIDI interface. Other than that you'll need a working GCC and probably some libraries that I've forgotten to note down. Suffice it to say that if you can compile simple Gtk apps, you won't be far wrong.

Clone the repository, then go into miragetools/miditerm and and build it:

$ ./waf configure
$ ./waf

If all goes well you should be able to run MIDIterm with:

$ ./build/miditerm

Use something like qjackctl to hook the ports up to your physical MIDI interface, remembering that "out" on MIDIterm needs to go to "in" on your interface. If you hook the "out" and "in" connectors on your interface together (maybe using the "through" port on the Mirage) then when you type stuff into MIDIterm you should see it echoed back.

Make sure the Mirage is hooked up to the appropriate MIDI connectors on your interface.

Switch to the asm09 directory. Build the assembler, then build the Forth image:

$ gcc as9.c -o as9
$ ./as9 forth.asm

Build the Mirage disk utility next. Change to the miragedisk directory, then build and install:

$ ./waf configure
$ ./waf
$ sudo ./waf install

Get a blank formatted diskette (or format one, with the instructions in miragetools/asm09/README.md) and write the Forth image:

$ miragetool --put-os forth.s19

Boot from the disk and you should see the right hand digit of the LED showing a rotating pattern.

At this point, you are running what is probably the first wholly new software to be written for the Ensoniq Mirage, for something like 20 years. Let that sink in for a moment.

Unfortunately the forth.asm source isn't hugely well-documented. My own additions don't really help either. Note that this version starts off with base set to 16 by default - this means that any numbers you type in or any it displays are hexadecimal. This may be surprising for the unwary.

At the "ok>" prompt, type "vlist" and you should see it list off all the Forth words the environment knows. You can read Dave Dunfield's notes on his implementation on his website.

To make your Mirage make a noise, just to prove it can be done:

ok> 18 e200 c! ( motor off, final VCA unmuted)
ok> 50 e410 c! ( VCF 1 cutoff opened up somewhat)
ok> ff e408 c! ( VCF 1 resonance up full)

You have just unmuted the audio (sample/play switch) and set the first VCF to self-resonate.

Happy hacking!

About

Tools and documentation for hacking on the Ensoniq Mirage 8-bit sampler

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 3

  •  
  •  
  •