sunxi: move CONFIG_SPL_TEXT_BASE from *_defconfig to Kconfig

The choice of the SPL_TEXT_BASE is not really a decision that should be specified by each board's defconfig, as this setting is actually dictated by the SoC's memory map and the BootROM behaviour. To make this obvious and reduce the clutter in the defconfig files, let's specify the SoC constraints in the Kconfig stanza. This allows us to remove these lines from the defconfig files again. Signed-off-by: Andre Przywara <[email protected]> Acked-by: Maxime Ripard <[email protected]> Reviewed-by: Jagan Teki <[email protected]>
grygoriyS · Jul 15, 2019 · 9340d8f · 9340d8f
1 parent 6070ef4
commit 9340d8f
Show file tree

Hide file tree

Showing 147 changed files with 3 additions and 146 deletions.
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
@@ -116,6 +116,9 @@ config SPL_LDSCRIPT
 config SPL_TEXT_BASE
 	hex "SPL Text Base"
 	default ISW_ENTRY_ADDR if AM43XX || AM33XX || OMAP54XX || ARCH_KEYSTONE
+	default 0x10060 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN9I
+	default 0x20060 if MACH_SUN50I_H6
+	default 0x00060 if ARCH_SUNXI
 	default 0x0
 	help
 	  The address in memory that SPL will be running from.

diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
@@ -11,7 +11,6 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig
@@ -9,7 +9,6 @@ CONFIG_MMC1_CD_PIN="PG13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=1
 CONFIG_USB1_VBUS_PIN="PB10"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig
@@ -13,7 +13,6 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 CONFIG_VIDEO_LCD_POWER="PB10"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set

diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
@@ -15,7 +15,6 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set

diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
@@ -13,7 +13,6 @@ CONFIG_SATAPWR="PC3"
 CONFIG_SPL_SPI_SUNXI=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set

diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
@@ -11,7 +11,6 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set

diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
@@ -9,7 +9,6 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/A20-OLinuXino_MICRO-eMMC_defconfig b/configs/A20-OLinuXino_MICRO-eMMC_defconfig
@@ -11,7 +11,6 @@ CONFIG_VIDEO_VGA=y
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig
@@ -12,7 +12,6 @@ CONFIG_VIDEO_VGA=y
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig
@@ -13,7 +13,6 @@ CONFIG_USB0_VBUS_DET="PH5"
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig
@@ -13,7 +13,6 @@ CONFIG_SATAPWR="PC3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/A20-Olimex-SOM204-EVB_defconfig b/configs/A20-Olimex-SOM204-EVB_defconfig
@@ -12,7 +12,6 @@ CONFIG_SATAPWR="PC3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/A33-OLinuXino_defconfig b/configs/A33-OLinuXino_defconfig
@@ -16,7 +16,6 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_BL_EN="PB2"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set

diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig
@@ -14,7 +14,6 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig
@@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/Auxtek-T003_defconfig b/configs/Auxtek-T003_defconfig
@@ -8,7 +8,6 @@ CONFIG_DRAM_EMR1=0
 CONFIG_USB1_VBUS_PIN="PB10"
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig
@@ -6,7 +6,6 @@ CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN="PG13"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig
@@ -9,7 +9,6 @@ CONFIG_MMC0_CD_PIN="PH13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-r40-bananapi-m2-ultra"

diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig
@@ -9,7 +9,6 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/Bananapi_m2m_defconfig b/configs/Bananapi_m2m_defconfig
@@ -10,7 +10,6 @@ CONFIG_MMC0_CD_PIN="PB4"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_USB0_ID_DET="PH8"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_PARTITION_UUIDS is not set

diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig
@@ -11,7 +11,6 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/CHIP_defconfig b/configs/CHIP_defconfig
@@ -6,7 +6,6 @@ CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
 CONFIG_USB0_VBUS_PIN="PB10"
 CONFIG_VIDEO_COMPOSITE=y
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y

diff --git a/configs/CHIP_pro_defconfig b/configs/CHIP_pro_defconfig
@@ -5,7 +5,6 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
 CONFIG_USB0_VBUS_PIN="PB10"
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MTDPARTS=y

diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig
@@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set

diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig
@@ -14,7 +14,6 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig
@@ -17,7 +17,6 @@ CONFIG_VIDEO_LCD_PANEL_I2C_SDA="PA23"
 CONFIG_VIDEO_LCD_PANEL_I2C_SCL="PA24"
 CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set

diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig
@@ -8,7 +8,6 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/Cubieboard4_defconfig b/configs/Cubieboard4_defconfig
@@ -12,7 +12,6 @@ CONFIG_USB0_ID_DET="PH16"
 CONFIG_USB1_VBUS_PIN="PH14"
 CONFIG_USB3_VBUS_PIN="PH15"
 CONFIG_AXP_GPIO=y
-CONFIG_SPL_TEXT_BASE=0x10060
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set

diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig
@@ -8,7 +8,6 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig
@@ -13,7 +13,6 @@ CONFIG_SATAPWR="PH12"
 CONFIG_GMAC_TX_DELAY=1
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set

diff --git a/configs/Cubietruck_plus_defconfig b/configs/Cubietruck_plus_defconfig
@@ -16,7 +16,6 @@ CONFIG_I2C0_ENABLE=y
 CONFIG_AXP_GPIO=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_CONSOLE_MUX=y
-CONFIG_SPL_TEXT_BASE=0x60
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set

diff --git a/configs/Empire_electronix_d709_defconfig b/configs/Empire_electronix_d709_defconfig
@@ -16,7 +16,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/Empire_electronix_m712_defconfig b/configs/Empire_electronix_m712_defconfig
@@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig
@@ -9,7 +9,6 @@ CONFIG_USB2_VBUS_PIN=""
 CONFIG_VIDEO_VGA_VIA_LCD=y
 CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set

diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig
@@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/Itead_Ibox_A20_defconfig b/configs/Itead_Ibox_A20_defconfig
@@ -8,7 +8,6 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig
@@ -10,7 +10,6 @@ CONFIG_SATAPWR="PB3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/LicheePi_Zero_defconfig b/configs/LicheePi_Zero_defconfig
@@ -4,7 +4,6 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_V3S=y
 CONFIG_DRAM_CLK=360
-CONFIG_SPL_TEXT_BASE=0x60
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set

diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig
@@ -10,7 +10,6 @@ CONFIG_SATAPWR="PH2"
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig
@@ -8,7 +8,6 @@ CONFIG_DRAM_ZQ=122
 CONFIG_SATAPWR="PH2"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig
@@ -6,7 +6,6 @@ CONFIG_MACH_SUN4I=y
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig
@@ -5,7 +5,6 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig
@@ -10,7 +10,6 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig
@@ -13,7 +13,6 @@ CONFIG_VIDEO_LCD_BL_EN="PA25"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set

diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig
@@ -5,7 +5,6 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set

diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig
@@ -8,7 +8,6 @@ CONFIG_INITIAL_USB_SCAN_DELAY=2000
 CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set

diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig
@@ -8,7 +8,6 @@ CONFIG_VIDEO_VGA=y
 CONFIG_VIDEO_COMPOSITE=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set

diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig
@@ -7,7 +7,6 @@ CONFIG_DRAM_ZQ=120
 CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_TEXT_BASE=0x60
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set