updated json (assimp#5501)

fix Tencent/rapidjson#1448

Co-authored-by: Kim Kulling <[email protected]>

contrib/rapidjson/include/rapidjson/error/en.h

@@ -1,15 +1,15 @@
 // Tencent is pleased to support the open source community by making RapidJSON available.
-// 
+//
 // Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip.
 //
 // Licensed under the MIT License (the "License"); you may not use this file except
 // in compliance with the License. You may obtain a copy of the License at
 //
 // http://opensource.org/licenses/MIT
 //
-// Unless required by applicable law or agreed to in writing, software distributed 
-// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
-// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// Unless required by applicable law or agreed to in writing, software distributed
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the
 // specific language governing permissions and limitations under the License.
 
 #ifndef RAPIDJSON_ERROR_EN_H_
@@ -39,13 +39,13 @@ inline const RAPIDJSON_ERROR_CHARTYPE* GetParseError_En(ParseErrorCode parseErro
 
         case kParseErrorDocumentEmpty:                  return RAPIDJSON_ERROR_STRING("The document is empty.");
         case kParseErrorDocumentRootNotSingular:        return RAPIDJSON_ERROR_STRING("The document root must not be followed by other values.");
-    
+
         case kParseErrorValueInvalid:                   return RAPIDJSON_ERROR_STRING("Invalid value.");
-    
+
         case kParseErrorObjectMissName:                 return RAPIDJSON_ERROR_STRING("Missing a name for object member.");
         case kParseErrorObjectMissColon:                return RAPIDJSON_ERROR_STRING("Missing a colon after a name of object member.");
         case kParseErrorObjectMissCommaOrCurlyBracket:  return RAPIDJSON_ERROR_STRING("Missing a comma or '}' after an object member.");
-    
+
         case kParseErrorArrayMissCommaOrSquareBracket:  return RAPIDJSON_ERROR_STRING("Missing a comma or ']' after an array element.");
 
         case kParseErrorStringUnicodeEscapeInvalidHex:  return RAPIDJSON_ERROR_STRING("Incorrect hex digit after \\u escape in string.");
@@ -104,15 +104,69 @@ inline const RAPIDJSON_ERROR_CHARTYPE* GetValidateError_En(ValidateErrorCode val
         case kValidateErrorType:                        return RAPIDJSON_ERROR_STRING("Property has a type '%actual' that is not in the following list: '%expected'.");
 
         case kValidateErrorOneOf:                       return RAPIDJSON_ERROR_STRING("Property did not match any of the sub-schemas specified by 'oneOf', refer to following errors.");
-        case kValidateErrorOneOfMatch:                  return RAPIDJSON_ERROR_STRING("Property matched more than one of the sub-schemas specified by 'oneOf'.");
+        case kValidateErrorOneOfMatch:                  return RAPIDJSON_ERROR_STRING("Property matched more than one of the sub-schemas specified by 'oneOf', indices '%matches'.");
         case kValidateErrorAllOf:                       return RAPIDJSON_ERROR_STRING("Property did not match all of the sub-schemas specified by 'allOf', refer to following errors.");
         case kValidateErrorAnyOf:                       return RAPIDJSON_ERROR_STRING("Property did not match any of the sub-schemas specified by 'anyOf', refer to following errors.");
         case kValidateErrorNot:                         return RAPIDJSON_ERROR_STRING("Property matched the sub-schema specified by 'not'.");
 
+        case kValidateErrorReadOnly:                    return RAPIDJSON_ERROR_STRING("Property is read-only but has been provided when validation is for writing.");
+        case kValidateErrorWriteOnly:                   return RAPIDJSON_ERROR_STRING("Property is write-only but has been provided when validation is for reading.");
+
         default:                                        return RAPIDJSON_ERROR_STRING("Unknown error.");
     }
 }
 
+//! Maps error code of schema document compilation into error message.
+/*!
+    \ingroup RAPIDJSON_ERRORS
+    \param schemaErrorCode Error code obtained from compiling the schema document.
+    \return the error message.
+    \note User can make a copy of this function for localization.
+        Using switch-case is safer for future modification of error codes.
+*/
+  inline const RAPIDJSON_ERROR_CHARTYPE* GetSchemaError_En(SchemaErrorCode schemaErrorCode) {
+      switch (schemaErrorCode) {
+          case kSchemaErrorNone:                        return RAPIDJSON_ERROR_STRING("No error.");
+
+          case kSchemaErrorStartUnknown:                return RAPIDJSON_ERROR_STRING("Pointer '%value' to start of schema does not resolve to a location in the document.");
+          case kSchemaErrorRefPlainName:                return RAPIDJSON_ERROR_STRING("$ref fragment '%value' must be a JSON pointer.");
+          case kSchemaErrorRefInvalid:                  return RAPIDJSON_ERROR_STRING("$ref must not be an empty string.");
+          case kSchemaErrorRefPointerInvalid:           return RAPIDJSON_ERROR_STRING("$ref fragment '%value' is not a valid JSON pointer at offset '%offset'.");
+          case kSchemaErrorRefUnknown:                  return RAPIDJSON_ERROR_STRING("$ref '%value' does not resolve to a location in the target document.");
+          case kSchemaErrorRefCyclical:                 return RAPIDJSON_ERROR_STRING("$ref '%value' is cyclical.");
+          case kSchemaErrorRefNoRemoteProvider:         return RAPIDJSON_ERROR_STRING("$ref is remote but there is no remote provider.");
+          case kSchemaErrorRefNoRemoteSchema:           return RAPIDJSON_ERROR_STRING("$ref '%value' is remote but the remote provider did not return a schema.");
+          case kSchemaErrorRegexInvalid:                return RAPIDJSON_ERROR_STRING("Invalid regular expression '%value' in 'pattern' or 'patternProperties'.");
+          case kSchemaErrorSpecUnknown:                 return RAPIDJSON_ERROR_STRING("JSON schema draft or OpenAPI version is not recognized.");
+          case kSchemaErrorSpecUnsupported:             return RAPIDJSON_ERROR_STRING("JSON schema draft or OpenAPI version is not supported.");
+          case kSchemaErrorSpecIllegal:                 return RAPIDJSON_ERROR_STRING("Both JSON schema draft and OpenAPI version found in document.");
+          case kSchemaErrorReadOnlyAndWriteOnly:        return RAPIDJSON_ERROR_STRING("Property must not be both 'readOnly' and 'writeOnly'.");
+
+          default:                                      return RAPIDJSON_ERROR_STRING("Unknown error.");
+    }
+  }
+
+//! Maps error code of pointer parse into error message.
+/*!
+    \ingroup RAPIDJSON_ERRORS
+    \param pointerParseErrorCode Error code obtained from pointer parse.
+    \return the error message.
+    \note User can make a copy of this function for localization.
+        Using switch-case is safer for future modification of error codes.
+*/
+inline const RAPIDJSON_ERROR_CHARTYPE* GetPointerParseError_En(PointerParseErrorCode pointerParseErrorCode) {
+    switch (pointerParseErrorCode) {
+        case kPointerParseErrorNone:                       return RAPIDJSON_ERROR_STRING("No error.");
+
+        case kPointerParseErrorTokenMustBeginWithSolidus:  return RAPIDJSON_ERROR_STRING("A token must begin with a '/'.");
+        case kPointerParseErrorInvalidEscape:              return RAPIDJSON_ERROR_STRING("Invalid escape.");
+        case kPointerParseErrorInvalidPercentEncoding:     return RAPIDJSON_ERROR_STRING("Invalid percent encoding in URI fragment.");
+        case kPointerParseErrorCharacterMustPercentEncode: return RAPIDJSON_ERROR_STRING("A character must be percent encoded in a URI fragment.");
+
+        default:                                           return RAPIDJSON_ERROR_STRING("Unknown error.");
+    }
+}
+
 RAPIDJSON_NAMESPACE_END
 
 #ifdef __clang__

contrib/rapidjson/include/rapidjson/error/error.h

@@ -1,15 +1,15 @@
 // Tencent is pleased to support the open source community by making RapidJSON available.
-// 
+//
 // Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip.
 //
 // Licensed under the MIT License (the "License"); you may not use this file except
 // in compliance with the License. You may obtain a copy of the License at
 //
 // http://opensource.org/licenses/MIT
 //
-// Unless required by applicable law or agreed to in writing, software distributed 
-// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
-// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// Unless required by applicable law or agreed to in writing, software distributed
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the
 // specific language governing permissions and limitations under the License.
 
 #ifndef RAPIDJSON_ERROR_ERROR_H_
@@ -42,7 +42,7 @@ RAPIDJSON_DIAG_OFF(padded)
 ///////////////////////////////////////////////////////////////////////////////
 // RAPIDJSON_ERROR_STRING
 
-//! Macro for converting string literial to \ref RAPIDJSON_ERROR_CHARTYPE[].
+//! Macro for converting string literal to \ref RAPIDJSON_ERROR_CHARTYPE[].
 /*! \ingroup RAPIDJSON_ERRORS
     By default this conversion macro does nothing.
     On Windows, user can define this macro as \c _T(x) for supporting both
@@ -185,14 +185,17 @@ enum ValidateErrorCode {
     kValidateErrorPatternProperties,           //!< See other errors.
     kValidateErrorDependencies,                //!< Object has missing property or schema dependencies.
 
-    kValidateErrorEnum,                        //!< Property has a value that is not one of its allowed enumerated values
-    kValidateErrorType,                        //!< Property has a type that is not allowed by the schema..
+    kValidateErrorEnum,                        //!< Property has a value that is not one of its allowed enumerated values.
+    kValidateErrorType,                        //!< Property has a type that is not allowed by the schema.
 
     kValidateErrorOneOf,                       //!< Property did not match any of the sub-schemas specified by 'oneOf'.
     kValidateErrorOneOfMatch,                  //!< Property matched more than one of the sub-schemas specified by 'oneOf'.
     kValidateErrorAllOf,                       //!< Property did not match all of the sub-schemas specified by 'allOf'.
     kValidateErrorAnyOf,                       //!< Property did not match any of the sub-schemas specified by 'anyOf'.
-    kValidateErrorNot                          //!< Property matched the sub-schema specified by 'not'.
+    kValidateErrorNot,                         //!< Property matched the sub-schema specified by 'not'.
+
+    kValidateErrorReadOnly,                    //!< Property is read-only but has been provided when validation is for writing
+    kValidateErrorWriteOnly                    //!< Property is write-only but has been provided when validation is for reading
 };
 
 //! Function pointer type of GetValidateError().
@@ -207,6 +210,72 @@ enum ValidateErrorCode {
 */
 typedef const RAPIDJSON_ERROR_CHARTYPE* (*GetValidateErrorFunc)(ValidateErrorCode);
 
+///////////////////////////////////////////////////////////////////////////////
+// SchemaErrorCode
+
+//! Error codes when validating.
+/*! \ingroup RAPIDJSON_ERRORS
+    \see GenericSchemaValidator
+*/
+enum SchemaErrorCode {
+    kSchemaErrorNone = 0,                      //!< No error.
+
+    kSchemaErrorStartUnknown,                  //!< Pointer to start of schema does not resolve to a location in the document
+    kSchemaErrorRefPlainName,                  //!< $ref fragment must be a JSON pointer
+    kSchemaErrorRefInvalid,                    //!< $ref must not be an empty string
+    kSchemaErrorRefPointerInvalid,             //!< $ref fragment is not a valid JSON pointer at offset
+    kSchemaErrorRefUnknown,                    //!< $ref does not resolve to a location in the target document
+    kSchemaErrorRefCyclical,                   //!< $ref is cyclical
+    kSchemaErrorRefNoRemoteProvider,           //!< $ref is remote but there is no remote provider
+    kSchemaErrorRefNoRemoteSchema,             //!< $ref is remote but the remote provider did not return a schema
+    kSchemaErrorRegexInvalid,                  //!< Invalid regular expression in 'pattern' or 'patternProperties'
+    kSchemaErrorSpecUnknown,                   //!< JSON schema draft or OpenAPI version is not recognized
+    kSchemaErrorSpecUnsupported,               //!< JSON schema draft or OpenAPI version is not supported
+    kSchemaErrorSpecIllegal,                   //!< Both JSON schema draft and OpenAPI version found in document
+    kSchemaErrorReadOnlyAndWriteOnly           //!< Property must not be both 'readOnly' and 'writeOnly'
+};
+
+//! Function pointer type of GetSchemaError().
+/*! \ingroup RAPIDJSON_ERRORS
+
+    This is the prototype for \c GetSchemaError_X(), where \c X is a locale.
+    User can dynamically change locale in runtime, e.g.:
+\code
+    GetSchemaErrorFunc GetSchemaError = GetSchemaError_En; // or whatever
+    const RAPIDJSON_ERROR_CHARTYPE* s = GetSchemaError(validator.GetInvalidSchemaCode());
+\endcode
+*/
+typedef const RAPIDJSON_ERROR_CHARTYPE* (*GetSchemaErrorFunc)(SchemaErrorCode);
+
+///////////////////////////////////////////////////////////////////////////////
+// PointerParseErrorCode
+
+//! Error code of JSON pointer parsing.
+/*! \ingroup RAPIDJSON_ERRORS
+    \see GenericPointer::GenericPointer, GenericPointer::GetParseErrorCode
+*/
+enum PointerParseErrorCode {
+    kPointerParseErrorNone = 0,                     //!< The parse is successful
+
+    kPointerParseErrorTokenMustBeginWithSolidus,    //!< A token must begin with a '/'
+    kPointerParseErrorInvalidEscape,                //!< Invalid escape
+    kPointerParseErrorInvalidPercentEncoding,       //!< Invalid percent encoding in URI fragment
+    kPointerParseErrorCharacterMustPercentEncode    //!< A character must percent encoded in URI fragment
+};
+
+//! Function pointer type of GetPointerParseError().
+/*! \ingroup RAPIDJSON_ERRORS
+
+    This is the prototype for \c GetPointerParseError_X(), where \c X is a locale.
+    User can dynamically change locale in runtime, e.g.:
+\code
+    GetPointerParseErrorFunc GetPointerParseError = GetPointerParseError_En; // or whatever
+    const RAPIDJSON_ERROR_CHARTYPE* s = GetPointerParseError(pointer.GetParseErrorCode());
+\endcode
+*/
+typedef const RAPIDJSON_ERROR_CHARTYPE* (*GetPointerParseErrorFunc)(PointerParseErrorCode);
+
+
 RAPIDJSON_NAMESPACE_END
 
 #ifdef __clang__

contrib/rapidjson/include/rapidjson/internal/biginteger.h

@@ -19,7 +19,11 @@
 
 #if defined(_MSC_VER) && !defined(__INTEL_COMPILER) && defined(_M_AMD64)
 #include <intrin.h> // for _umul128
+#if !defined(_ARM64EC_)
 #pragma intrinsic(_umul128)
+#else
+#pragma comment(lib,"softintrin")
+#endif
 #endif
 
 RAPIDJSON_NAMESPACE_BEGIN
@@ -37,7 +41,8 @@ class BigInteger {
         digits_[0] = u;
     }
 
-    BigInteger(const char* decimals, size_t length) : count_(1) {
+    template<typename Ch>
+    BigInteger(const Ch* decimals, size_t length) : count_(1) {
         RAPIDJSON_ASSERT(length > 0);
         digits_[0] = 0;
         size_t i = 0;
@@ -221,7 +226,8 @@ class BigInteger {
     bool IsZero() const { return count_ == 1 && digits_[0] == 0; }
 
 private:
-    void AppendDecimal64(const char* begin, const char* end) {
+    template<typename Ch>
+    void AppendDecimal64(const Ch* begin, const Ch* end) {
         uint64_t u = ParseUint64(begin, end);
         if (IsZero())
             *this = u;
@@ -236,11 +242,12 @@ class BigInteger {
         digits_[count_++] = digit;
     }
 
-    static uint64_t ParseUint64(const char* begin, const char* end) {
+    template<typename Ch>
+    static uint64_t ParseUint64(const Ch* begin, const Ch* end) {
         uint64_t r = 0;
-        for (const char* p = begin; p != end; ++p) {
-            RAPIDJSON_ASSERT(*p >= '0' && *p <= '9');
-            r = r * 10u + static_cast<unsigned>(*p - '0');
+        for (const Ch* p = begin; p != end; ++p) {
+            RAPIDJSON_ASSERT(*p >= Ch('0') && *p <= Ch('9'));
+            r = r * 10u + static_cast<unsigned>(*p - Ch('0'));
         }
         return r;
     }
@@ -252,7 +259,7 @@ class BigInteger {
         if (low < k)
             (*outHigh)++;
         return low;
-#elif (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)) && defined(__x86_64__)
+#elif defined(__GNUC__) && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)) && defined(__x86_64__)
         __extension__ typedef unsigned __int128 uint128;
         uint128 p = static_cast<uint128>(a) * static_cast<uint128>(b);
         p += k;

contrib/rapidjson/include/rapidjson/internal/diyfp.h

@@ -25,7 +25,11 @@
 
 #if defined(_MSC_VER) && defined(_M_AMD64) && !defined(__INTEL_COMPILER)
 #include <intrin.h>
+#if !defined(_ARM64EC_)
 #pragma intrinsic(_umul128)
+#else
+#pragma comment(lib,"softintrin")
+#endif
 #endif
 
 RAPIDJSON_NAMESPACE_BEGIN
@@ -75,7 +79,7 @@ struct DiyFp {
         if (l & (uint64_t(1) << 63)) // rounding
             h++;
         return DiyFp(h, e + rhs.e + 64);
-#elif (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)) && defined(__x86_64__)
+#elif defined(__GNUC__) && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)) && defined(__x86_64__)
         __extension__ typedef unsigned __int128 uint128;
         uint128 p = static_cast<uint128>(f) * static_cast<uint128>(rhs.f);
         uint64_t h = static_cast<uint64_t>(p >> 64);

contrib/rapidjson/include/rapidjson/internal/dtoa.h

@@ -58,7 +58,11 @@ inline int CountDecimalDigit32(uint32_t n) {
 }
 
 inline void DigitGen(const DiyFp& W, const DiyFp& Mp, uint64_t delta, char* buffer, int* len, int* K) {
-    static const uint32_t kPow10[] = { 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000, 100000000, 1000000000 };
+    static const uint64_t kPow10[] = { 1ULL, 10ULL, 100ULL, 1000ULL, 10000ULL, 100000ULL, 1000000ULL, 10000000ULL, 100000000ULL,
+                                       1000000000ULL, 10000000000ULL, 100000000000ULL, 1000000000000ULL,
+                                       10000000000000ULL, 100000000000000ULL, 1000000000000000ULL,
+                                       10000000000000000ULL, 100000000000000000ULL, 1000000000000000000ULL,
+                                       10000000000000000000ULL };
     const DiyFp one(uint64_t(1) << -Mp.e, Mp.e);
     const DiyFp wp_w = Mp - W;
     uint32_t p1 = static_cast<uint32_t>(Mp.f >> -one.e);
@@ -86,7 +90,7 @@ inline void DigitGen(const DiyFp& W, const DiyFp& Mp, uint64_t delta, char* buff
         uint64_t tmp = (static_cast<uint64_t>(p1) << -one.e) + p2;
         if (tmp <= delta) {
             *K += kappa;
-            GrisuRound(buffer, *len, delta, tmp, static_cast<uint64_t>(kPow10[kappa]) << -one.e, wp_w.f);
+            GrisuRound(buffer, *len, delta, tmp, kPow10[kappa] << -one.e, wp_w.f);
             return;
         }
     }
@@ -103,7 +107,7 @@ inline void DigitGen(const DiyFp& W, const DiyFp& Mp, uint64_t delta, char* buff
         if (p2 < delta) {
             *K += kappa;
             int index = -kappa;
-            GrisuRound(buffer, *len, delta, p2, one.f, wp_w.f * (index < 9 ? kPow10[index] : 0));
+            GrisuRound(buffer, *len, delta, p2, one.f, wp_w.f * (index < 20 ? kPow10[index] : 0));
             return;
         }
     }

contrib/rapidjson/include/rapidjson/internal/regex.h

@@ -615,7 +615,7 @@ class GenericRegexSearch {
         RAPIDJSON_ASSERT(regex_.IsValid());
         if (!allocator_)
             ownAllocator_ = allocator_ = RAPIDJSON_NEW(Allocator)();
-        stateSet_ = static_cast<unsigned*>(allocator_->Malloc(GetStateSetSize()));
+        stateSet_ = static_cast<uint32_t*>(allocator_->Malloc(GetStateSetSize()));
         state0_.template Reserve<SizeType>(regex_.stateCount_);
         state1_.template Reserve<SizeType>(regex_.stateCount_);
     }