Minor tweaks to the Doxygen theme. (flutter#11576)

Doxyfile

@@ -51,7 +51,7 @@ PROJECT_BRIEF          =
 # pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
 # the logo to the output directory.
 
-PROJECT_LOGO           =
+PROJECT_LOGO           = ./docs/flutter_logo.png
 
 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
 # into which the generated documentation will be written. If a relative path is
@@ -645,26 +645,26 @@ STRICT_PROTO_MATCHING  = NO
 # list. This list is created by putting \todo commands in the documentation.
 # The default value is: YES.
 
-GENERATE_TODOLIST      = YES
+GENERATE_TODOLIST      = NO
 
 # The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
 # list. This list is created by putting \test commands in the documentation.
 # The default value is: YES.
 
-GENERATE_TESTLIST      = YES
+GENERATE_TESTLIST      = NO
 
 # The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
 # list. This list is created by putting \bug commands in the documentation.
 # The default value is: YES.
 
-GENERATE_BUGLIST       = YES
+GENERATE_BUGLIST       = NO
 
 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
 # the deprecated list. This list is created by putting \deprecated commands in
 # the documentation.
 # The default value is: YES.
 
-GENERATE_DEPRECATEDLIST= YES
+GENERATE_DEPRECATEDLIST= NO
 
 # The ENABLED_SECTIONS tag can be used to enable conditional documentation
 # sections, marked by \if <section_label> ... \endif and \cond <section_label>
@@ -813,7 +813,9 @@ WARN_LOGFILE           =
 # spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
 # Note: If this tag is empty the current directory is searched.
 
-INPUT                  =
+INPUT                  = . \
+                         ../third_party/skia/include \
+                         ../third_party/dart/runtime/include \
 
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
@@ -838,51 +840,7 @@ INPUT_ENCODING         = UTF-8
 # *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,
 # *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice.
 
-FILE_PATTERNS          = *.c \
-                         *.cc \
-                         *.cxx \
-                         *.cpp \
-                         *.c++ \
-                         *.java \
-                         *.ii \
-                         *.ixx \
-                         *.ipp \
-                         *.i++ \
-                         *.inl \
-                         *.idl \
-                         *.ddl \
-                         *.odl \
-                         *.h \
-                         *.hh \
-                         *.hxx \
-                         *.hpp \
-                         *.h++ \
-                         *.cs \
-                         *.d \
-                         *.php \
-                         *.php4 \
-                         *.php5 \
-                         *.phtml \
-                         *.inc \
-                         *.m \
-                         *.markdown \
-                         *.md \
-                         *.mm \
-                         *.dox \
-                         *.py \
-                         *.pyw \
-                         *.f90 \
-                         *.f95 \
-                         *.f03 \
-                         *.f08 \
-                         *.f \
-                         *.for \
-                         *.tcl \
-                         *.vhd \
-                         *.vhdl \
-                         *.ucf \
-                         *.qsf \
-                         *.ice
+FILE_PATTERNS          = *.h *.c *.cc *.m *.mm
 
 # The RECURSIVE tag can be used to specify whether or not subdirectories should
 # be searched for input files as well.
@@ -1025,26 +983,26 @@ SOURCE_BROWSER         = YES
 # classes and enums directly into the documentation.
 # The default value is: NO.
 
-INLINE_SOURCES         = NO
+INLINE_SOURCES         = YES
 
 # Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
 # special comment blocks from generated source code fragments. Normal C, C++ and
 # Fortran comments will always remain visible.
 # The default value is: YES.
 
-STRIP_CODE_COMMENTS    = YES
+STRIP_CODE_COMMENTS    = NO
 
 # If the REFERENCED_BY_RELATION tag is set to YES then for each documented
 # entity all documented functions referencing it will be listed.
 # The default value is: NO.
 
-REFERENCED_BY_RELATION = NO
+REFERENCED_BY_RELATION = YES
 
 # If the REFERENCES_RELATION tag is set to YES then for each documented function
 # all documented entities called/used by that function will be listed.
 # The default value is: NO.
 
-REFERENCES_RELATION    = NO
+REFERENCES_RELATION    = YES
 
 # If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
 # to YES then the hyperlinks from functions in REFERENCES_RELATION and
@@ -1162,7 +1120,7 @@ HTML_FILE_EXTENSION    = .html
 # of the possible markers and block names see the documentation.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
-HTML_HEADER            =
+HTML_HEADER            = ./docs/header.html
 
 # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
 # generated HTML page. If the tag is left blank doxygen will generate a standard
@@ -1172,7 +1130,7 @@ HTML_HEADER            =
 # that doxygen normally uses.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
-HTML_FOOTER            =
+HTML_FOOTER            = ./docs/footer.html
 
 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
 # sheet that is used by each HTML page. It can be used to fine-tune the look of
@@ -1218,15 +1176,15 @@ HTML_EXTRA_FILES       =
 # Minimum value: 0, maximum value: 359, default value: 220.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
-HTML_COLORSTYLE_HUE    = 220
+HTML_COLORSTYLE_HUE    = 212
 
 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
 # in the HTML output. For a value of 0 the output will use grayscales only. A
 # value of 255 will produce the most vivid colors.
 # Minimum value: 0, maximum value: 255, default value: 100.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
-HTML_COLORSTYLE_SAT    = 100
+HTML_COLORSTYLE_SAT    = 183
 
 # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
 # luminance component of the colors in the HTML output. Values below 100
@@ -1237,7 +1195,7 @@ HTML_COLORSTYLE_SAT    = 100
 # Minimum value: 40, maximum value: 240, default value: 80.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
-HTML_COLORSTYLE_GAMMA  = 80
+HTML_COLORSTYLE_GAMMA  = 100
 
 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
 # page will contain the date and time when the page was generated. Setting this
@@ -1246,7 +1204,7 @@ HTML_COLORSTYLE_GAMMA  = 80
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
-HTML_TIMESTAMP         = NO
+HTML_TIMESTAMP         = YES
 
 # If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
 # documentation will contain a main index with vertical navigation menus that
@@ -1292,37 +1250,37 @@ HTML_INDEX_NUM_ENTRIES = 100
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
-GENERATE_DOCSET        = NO
+GENERATE_DOCSET        = YES
 
 # This tag determines the name of the docset feed. A documentation feed provides
 # an umbrella under which multiple documentation sets from a single provider
 # (such as a company or product suite) can be grouped.
 # The default value is: Doxygen generated docs.
 # This tag requires that the tag GENERATE_DOCSET is set to YES.
 
-DOCSET_FEEDNAME        = "Doxygen generated docs"
+DOCSET_FEEDNAME        = "Flutter Engine"
 
 # This tag specifies a string that should uniquely identify the documentation
 # set bundle. This should be a reverse domain-name style string, e.g.
 # com.mycompany.MyDocSet. Doxygen will append .docset to the name.
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_DOCSET is set to YES.
 
-DOCSET_BUNDLE_ID       = org.doxygen.Project
+DOCSET_BUNDLE_ID       = io.flutter.engine
 
 # The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
 # the documentation publisher. This should be a reverse domain-name style
 # string, e.g. com.mycompany.MyDocSet.documentation.
 # The default value is: org.doxygen.Publisher.
 # This tag requires that the tag GENERATE_DOCSET is set to YES.
 
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+DOCSET_PUBLISHER_ID    = io.flutter.engine
 
 # The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
 # The default value is: Publisher.
 # This tag requires that the tag GENERATE_DOCSET is set to YES.
 
-DOCSET_PUBLISHER_NAME  = Publisher
+DOCSET_PUBLISHER_NAME  = Flutter
 
 # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
 # additional HTML index files: index.hhp, index.hhc, and index.hhk. The
@@ -1407,7 +1365,7 @@ QCH_FILE               =
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
-QHP_NAMESPACE          = org.doxygen.Project
+QHP_NAMESPACE          = io.flutter.engine
 
 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
 # Help Project output. For more information please see Qt Help Project / Virtual
@@ -1466,7 +1424,7 @@ GENERATE_ECLIPSEHELP   = NO
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
 
-ECLIPSE_DOC_ID         = org.doxygen.Project
+ECLIPSE_DOC_ID         = io.flutter.engine
 
 # If you want full control over the layout of the generated HTML pages it might
 # be necessary to disable the index and replace it with your own. The
@@ -1477,7 +1435,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
-DISABLE_INDEX          = NO
+DISABLE_INDEX          = YES
 
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information. If the tag
@@ -1494,7 +1452,7 @@ DISABLE_INDEX          = NO
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
-GENERATE_TREEVIEW      = NO
+GENERATE_TREEVIEW      = YES
 
 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
 # doxygen will group on one line in the generated HTML documentation.
@@ -1504,7 +1462,7 @@ GENERATE_TREEVIEW      = NO
 # Minimum value: 0, maximum value: 20, default value: 4.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
-ENUM_VALUES_PER_LINE   = 4
+ENUM_VALUES_PER_LINE   = 1
 
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
 # to set the initial width (in pixels) of the frame in which the tree is shown.