Adding all the files

.gitignore

@@ -0,0 +1,4 @@
+Work/
+.DS_Store
+*.log
+*.swp

Build

@@ -0,0 +1,159 @@
+#!/bin/sh
+# $Id: Build 40051 2016-03-17 01:20:14Z mojca $
+# Public domain.  Originally written many years ago by Sebastian Rahtz.
+# The basic idea is to run configure && make, but with a multitude of
+# environment variables to allow overriding everything.
+# 
+# To build again from where it left off, try Build --no-clean.
+# To build without optimization, try Build --debug.
+# Any other options given are passed along to configure.
+
+# clean up environment
+unset TEXMFCNF; export TEXMFCNF
+LANG=C; export LANG
+
+# cd to our source directory.
+mydir=`dirname $0`
+cd $mydir || exit 1
+
+: ${TL_WORKDIR=Work}
+
+# allow override of install destination.
+if test -z "$TL_INSTALL_DEST"; then
+  H=`pwd`
+  test -d inst || mkdir -p inst/texmf  # avoid configure warnings
+  TL_INSTALL_DEST=$H/inst
+fi
+
+# allow override of the make program.
+# The idea is to use TL_MAKE if that is defined (and set MAKE),
+# or MAKE if that is defined (and set TL_MAKE),
+# or default to "make" if neither is set.
+# We have to end up with both defined because TL_MAKE is used below
+# in this script, and MAKE is used throughout (in its usual way).
+if test -n "$TL_MAKE"; then
+  MAKE=$TL_MAKE
+elif test -n "$MAKE"; then
+  TL_MAKE=$MAKE
+else
+  TL_MAKE=make
+  MAKE=make
+fi
+export MAKE
+
+# make flags
+: ${TL_MAKE_FLAGS=}
+
+# allow override of make target.
+: ${TL_TARGET=world}
+
+if test "x$1" = x--no-clean; then
+  shift
+else
+  test -f Makefile && $MAKE clean 
+  rm -rf $TL_WORKDIR $TL_INSTALL_DEST
+fi
+
+# allow adding environment setting for build.
+: ${TL_BUILD_ENV=}
+if test "x$1" = x--debug || test "x$1" = x-g; then
+  shift
+  # The idea is that with Build -g, you can set TL_COMPILER_GFLAGS in
+  # the environment with options common to all compilers --
+  # not necessarily anything to do with debugging, e.g., -mcpu=sparvc9.
+  : ${TL_COMPILER_GFLAGS=-g}
+  c="CFLAGS='$TL_COMPILER_GFLAGS'"
+  cxx="CXXFLAGS='$TL_COMPILER_GFLAGS'"
+  objcxx="OBJCXXFLAGS='$TL_COMPILER_GFLAGS'"  # needed only on macs
+  TL_BUILD_ENV="$c $cxx $objcxx $TL_BUILD_ENV"
+fi
+
+# allow override of configure location.
+: ${TL_CONFIGURE=../configure}
+
+# allow for changing the banner identification, e.g.,
+# --with-banner-add='/SomeDistro'; see the build doc.
+: ${TL_CONF_BANNER=} 
+
+# default to supporting large files as much as possible;
+# see comments at --disable-largefile in README.config.
+: ${TL_CONF_LARGEFILE=--enable-largefile}
+
+# default to terminate if requested programs or features must be disabled.
+: ${TL_CONF_MISSING=--disable-missing}
+
+# default to static linking.
+: ${TL_CONF_SHARED=--disable-shared}
+
+# allow override of xdvi toolkit, default to standard xaw.
+: ${TL_CONF_XDVI_TOOLKIT=--with-xdvi-x-toolkit=xaw}
+
+# allow adding arbitrary other configure args, after all the others.
+: ${TL_CONFIGURE_ARGS=}
+
+# allow for doing stuff betwen configure and make.
+: ${TL_POSTCONFIGURE=true} 
+
+# Kpathsea is not going to be able to find its cnf files during the
+# build, so omit the warning about it.
+: ${KPATHSEA_WARNING=0}
+
+# make our working directory.
+test -d $TL_WORKDIR || mkdir $TL_WORKDIR
+cd $TL_WORKDIR || exit 1
+
+# configure && make.  Keep the tee outside, so that we can detect
+# failure at either step.
+{
+  echo "starting TeX Live build at `date`"
+  echo "on `uname -a`"
+  echo "in `pwd`"
+  echo "$0 $*"
+  echo
+  env | sort >buildenv.log
+  #
+  set -vx  # show the configure and make commands in the log.
+
+  eval $TL_BUILD_ENV $TL_CONFIGURE \
+        --prefix=$TL_INSTALL_DEST \
+        --datadir=$TL_INSTALL_DEST \
+        $TL_CONF_BANNER \
+        $TL_CONF_MISSING \
+        $TL_CONF_LARGEFILE \
+        $TL_CONF_SHARED \
+        $TL_CONF_XDVI_TOOLKIT \
+        $TL_CONFIGURE_ARGS \
+        "$@" \
+  && eval $TL_POSTCONFIGURE \
+  && eval $TL_BUILD_ENV $TL_MAKE $TL_MAKE_FLAGS $TL_TARGET
+
+  # Too arcane to try to propagate the exit status through a pipeline.
+  # Just use a temp file.
+  echo $? >exitstatus.txt
+} 2>&1 | tee build.log
+
+
+# if we have a bindir, report the number of binaries built.
+bindir=$TL_INSTALL_DEST/bin
+if test -d "$bindir"; then
+  count=`find "$bindir" \! -type d -print | wc -l`
+  if test "$count" -gt 0; then
+    echo
+    echo "$0: $count executables in $bindir."
+  else
+    echo "$0: Build failed, no executables under $bindir."
+    echo "$0: Full log in `pwd`/build.log."
+    exit 1
+  fi | tee -a build.log
+# if no bindir, perhaps they specified --prefix; don't worry.
+# Any errors will have been duly reported anyway.
+fi
+
+status=`cat exitstatus.txt`
+if echo "$status" | egrep '^[0-9]+$' >/dev/null; then :; else
+  echo "$0: exitstatus.txt does not contain a number; disk full?" >&2
+  status=1
+fi
+echo "done (exit status $status)" `date` | tee -a build.log
+
+exit $status