Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:
 "Included in these updates are:
   - Performance optimisation to avoid writing the control register at
     every exception.
   - Use static inline instead of extern inline in ftrace code.
   - Crypto ARM assembly updates for big endian
   - Alignment of initrd/.init memory to page sizes when freeing to
     ensure that we fully free the regions
   - Add gcov support
   - A couple of preparatory patches for VDSO support: use
     _install_special_mapping, and randomize the sigpage placement above
     stack.
   - Add L2 ePAPR DT cache properties so that DT can specify the cache
     geometry.
   - Preparatory patch for FIQ (NMI) kernel C code for things like
     spinlock lockup debug.  Following on from this are a couple of my
     patches cleaning up show_regs() and removing an unused (probably
     since 1.x days) do_unexp_fiq() function.
   - Use pr_warn() rather than pr_warning().
   - A number of cleanups (smp, footbridge, return_address)"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (21 commits)
  ARM: 8167/1: extend the reserved memory for initrd to be page aligned
  ARM: 8168/1: extend __init_end to a page align address
  ARM: 8169/1: l2c: parse cache properties from ePAPR definitions
  ARM: 8160/1: drop warning about return_address not using unwind tables
  ARM: 8161/1: footbridge: select machine dir based on ARCH_FOOTBRIDGE
  ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
  ARM: 8155/1: place sigpage at a random offset above stack
  ARM: 8154/1: use _install_special_mapping for sigpage
  ARM: 8153/1: Enable gcov support on the ARM architecture
  ARM: Avoid writing to control register on every exception
  ARM: 8152/1: Convert pr_warning to pr_warn
  ARM: remove unused do_unexp_fiq() function
  ARM: remove extraneous newline in show_regs()
  ARM: 8150/3: fiq: Replace default FIQ handler
  ARM: 8140/1: ep93xx: Enable DEBUG_LL_UART_PL01X
  ARM: 8139/1: versatile: Enable DEBUG_LL_UART_PL01X
  ARM: 8138/1: drop ISAR0 workaround for B15
  ARM: 8136/1: sa1100: add Micro ASIC platform device
  ARM: 8131/1: arm/smp: Absorb boot_secondary()
  ARM: 8126/1: crypto: enable NEON SHA-384/SHA-512 for big endian
  ...

Documentation/devicetree/bindings/arm/l2cc.txt

@@ -2,6 +2,10 @@
 
 ARM cores often have a separate level 2 cache controller. There are various
 implementations of the L2 cache controller with compatible programming models.
+Some of the properties that are just prefixed "cache-*" are taken from section
+3.7.3 of the ePAPR v1.1 specification which can be found at:
+https://www.power.org/wp-content/uploads/2012/06/Power_ePAPR_APPROVED_v1.1.pdf
+
 The ARM L2 cache representation in the device tree should be done as follows:
 
 Required properties:
@@ -44,6 +48,12 @@ Optional properties:
   I/O coherent mode. Valid only when the arm,pl310-cache compatible
   string is used.
 - interrupts : 1 combined interrupt.
+- cache-size : specifies the size in bytes of the cache
+- cache-sets : specifies the number of associativity sets of the cache
+- cache-block-size : specifies the size in bytes of a cache block
+- cache-line-size : specifies the size in bytes of a line in the cache,
+  if this is not specified, the line size is assumed to be equal to the
+  cache block size
 - cache-id-part: cache id part number to be used if it is not present
   on hardware
 - wt-override: If present then L2 is forced to Write through mode

arch/arm/Makefile

@@ -157,6 +157,7 @@ machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
 machine-$(CONFIG_ARCH_EFM32)		+= efm32
 machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
 machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
+machine-$(CONFIG_ARCH_FOOTBRIDGE)	+= footbridge
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_HISI)		+= hisi
@@ -205,7 +206,6 @@ machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
 machine-$(CONFIG_ARCH_W90X900)		+= w90x900
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
-machine-$(CONFIG_FOOTBRIDGE)		+= footbridge
 machine-$(CONFIG_PLAT_SPEAR)		+= spear
 
 # Platform directory name.  This list is sorted alphanumerically

arch/arm/boot/bootp/Makefile

@@ -5,6 +5,8 @@
 # architecture-specific flags and dependencies.
 #
 
+GCOV_PROFILE	:= n
+
 LDFLAGS_bootp	:=-p --no-undefined -X \
 		 --defsym initrd_phys=$(INITRD_PHYS) \
 		 --defsym params_phys=$(PARAMS_PHYS) -T

arch/arm/boot/compressed/Makefile

@@ -37,6 +37,8 @@ ifeq ($(CONFIG_ARM_VIRT_EXT),y)
 OBJS		+= hyp-stub.o
 endif
 
+GCOV_PROFILE		:= n
+
 #
 # Architecture dependencies
 #

arch/arm/configs/ep93xx_defconfig

@@ -107,5 +107,6 @@ CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_UART_PL01X=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_LIBCRC32C=y

arch/arm/configs/versatile_defconfig

@@ -82,5 +82,6 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_UART_PL01X=y
 CONFIG_FONTS=y
 CONFIG_FONT_ACORN_8x8=y

arch/arm/crypto/sha1-armv7-neon.S

@@ -9,7 +9,7 @@
  */
 
 #include <linux/linkage.h>
-
+#include <asm/assembler.h>
 
 .syntax unified
 .code   32
@@ -61,13 +61,13 @@
 #define RT3 r12
 
 #define W0 q0
-#define W1 q1
+#define W1 q7
 #define W2 q2
 #define W3 q3
 #define W4 q4
-#define W5 q5
-#define W6 q6
-#define W7 q7
+#define W5 q6
+#define W6 q5
+#define W7 q1
 
 #define tmp0 q8
 #define tmp1 q9
@@ -79,6 +79,11 @@
 #define qK3 q14
 #define qK4 q15
 
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define ARM_LE(code...)
+#else
+#define ARM_LE(code...)		code
+#endif
 
 /* Round function macros. */
 
@@ -150,45 +155,45 @@
 #define W_PRECALC_00_15() \
 	add       RWK, sp, #(WK_offs(0));			\
 	\
-	vld1.32   {tmp0, tmp1}, [RDATA]!;			\
-	vrev32.8  W0, tmp0;		/* big => little */	\
-	vld1.32   {tmp2, tmp3}, [RDATA]!;			\
+	vld1.32   {W0, W7}, [RDATA]!;				\
+ ARM_LE(vrev32.8  W0, W0;	)	/* big => little */	\
+	vld1.32   {W6, W5}, [RDATA]!;				\
 	vadd.u32  tmp0, W0, curK;				\
-	vrev32.8  W7, tmp1;		/* big => little */	\
-	vrev32.8  W6, tmp2;		/* big => little */	\
+ ARM_LE(vrev32.8  W7, W7;	)	/* big => little */	\
+ ARM_LE(vrev32.8  W6, W6;	)	/* big => little */	\
 	vadd.u32  tmp1, W7, curK;				\
-	vrev32.8  W5, tmp3;		/* big => little */	\
+ ARM_LE(vrev32.8  W5, W5;	)	/* big => little */	\
 	vadd.u32  tmp2, W6, curK;				\
 	vst1.32   {tmp0, tmp1}, [RWK]!;				\
 	vadd.u32  tmp3, W5, curK;				\
 	vst1.32   {tmp2, tmp3}, [RWK];				\
 
 #define WPRECALC_00_15_0(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vld1.32   {tmp0, tmp1}, [RDATA]!;			\
+	vld1.32   {W0, W7}, [RDATA]!;				\
 
 #define WPRECALC_00_15_1(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
 	add       RWK, sp, #(WK_offs(0));			\
 
 #define WPRECALC_00_15_2(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vrev32.8  W0, tmp0;		/* big => little */	\
+ ARM_LE(vrev32.8  W0, W0;	)	/* big => little */	\
 
 #define WPRECALC_00_15_3(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vld1.32   {tmp2, tmp3}, [RDATA]!;			\
+	vld1.32   {W6, W5}, [RDATA]!;				\
 
 #define WPRECALC_00_15_4(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
 	vadd.u32  tmp0, W0, curK;				\
 
 #define WPRECALC_00_15_5(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vrev32.8  W7, tmp1;		/* big => little */	\
+ ARM_LE(vrev32.8  W7, W7;	)	/* big => little */	\
 
 #define WPRECALC_00_15_6(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vrev32.8  W6, tmp2;		/* big => little */	\
+ ARM_LE(vrev32.8  W6, W6;	)	/* big => little */	\
 
 #define WPRECALC_00_15_7(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
 	vadd.u32  tmp1, W7, curK;				\
 
 #define WPRECALC_00_15_8(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vrev32.8  W5, tmp3;		/* big => little */	\
+ ARM_LE(vrev32.8  W5, W5;	)	/* big => little */	\
 
 #define WPRECALC_00_15_9(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
 	vadd.u32  tmp2, W6, curK;				\

arch/arm/include/asm/ftrace.h

@@ -45,7 +45,7 @@ void *return_address(unsigned int);
 
 #else
 
-extern inline void *return_address(unsigned int level)
+static inline void *return_address(unsigned int level)
 {
 	return NULL;
 }

arch/arm/include/asm/smp.h

@@ -48,12 +48,6 @@ extern void smp_init_cpus(void);
  */
 extern void set_smp_cross_call(void (*)(const struct cpumask *, unsigned int));
 
-/*
- * Boot a secondary CPU, and assign it the specified idle task.
- * This also gives us the initial stack to use for this CPU.
- */
-extern int boot_secondary(unsigned int cpu, struct task_struct *);
-
 /*
  * Called from platform specific assembly code, this is the
  * secondary CPU entry point.

arch/arm/include/asm/syscall.h

@@ -63,8 +63,8 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	if (i + n > SYSCALL_MAX_ARGS) {
 		unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i;
 		unsigned int n_bad = n + i - SYSCALL_MAX_ARGS;
-		pr_warning("%s called with max args %d, handling only %d\n",
-			   __func__, i + n, SYSCALL_MAX_ARGS);
+		pr_warn("%s called with max args %d, handling only %d\n",
+			__func__, i + n, SYSCALL_MAX_ARGS);
 		memset(args_bad, 0, n_bad * sizeof(args[0]));
 		n = SYSCALL_MAX_ARGS - i;
 	}
@@ -88,8 +88,8 @@ static inline void syscall_set_arguments(struct task_struct *task,
 		return;
 
 	if (i + n > SYSCALL_MAX_ARGS) {
-		pr_warning("%s called with max args %d, handling only %d\n",
-			   __func__, i + n, SYSCALL_MAX_ARGS);
+		pr_warn("%s called with max args %d, handling only %d\n",
+			__func__, i + n, SYSCALL_MAX_ARGS);
 		n = SYSCALL_MAX_ARGS - i;
 	}
 

arch/arm/kernel/atags_parse.c

@@ -130,7 +130,7 @@ static int __init parse_tag_cmdline(const struct tag *tag)
 	strlcat(default_command_line, tag->u.cmdline.cmdline,
 		COMMAND_LINE_SIZE);
 #elif defined(CONFIG_CMDLINE_FORCE)
-	pr_warning("Ignoring tag cmdline (using the default kernel command line)\n");
+	pr_warn("Ignoring tag cmdline (using the default kernel command line)\n");
 #else
 	strlcpy(default_command_line, tag->u.cmdline.cmdline,
 		COMMAND_LINE_SIZE);