Convert CONFIG_SYS_MONITOR_LEN to Kconfig

This converts the following to Kconfig: CONFIG_SYS_MONITOR_LEN To do this, we set a default of 0 for everyone because there are a number of cases where we define CONFIG_SYS_MONITOR_LEN but the only impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE, so we must continue to allow all boards to set this value. Update the SPL code to use 200 KB as the default raw U-Boot size directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
imaami · Nov 10, 2022 · 08574ed · 08574ed
1 parent 9ba938e
commit 08574ed
Show file tree

Hide file tree

Showing 657 changed files with 542 additions and 256 deletions.
diff --git a/Kconfig b/Kconfig
@@ -583,6 +583,17 @@ config SYS_SRAM_SIZE
 	default 0x10000 if TARGET_TRICORDER
 	default 0x0
 
+config SYS_MONITOR_LEN
+	int "Maximum size in bytes reserved for U-Boot in memory"
+	default 1048576 if X86
+	default 0
+	help
+	  Size of memory reserved for monitor code, used to determine
+	  _at_compile_time_ (!) if the environment is embedded within the
+	  U-Boot image, or in a separate flash sector, among other uses where
+	  we need to set a maximum size of the U-Boot binary itself that will
+	  be loaded.
+
 config MP
 	bool "Support for multiprocessor"
 	help

diff --git a/README b/README
@@ -1452,12 +1452,6 @@ Configuration Settings:
 - CONFIG_SYS_FLASH_BASE:
 		Physical start address of Flash memory.
 
-- CONFIG_SYS_MONITOR_LEN:
-		Size of memory reserved for monitor code, used to
-		determine _at_compile_time_ (!) if the environment is
-		embedded within the U-Boot image, or in a separate
-		flash sector.
-
 - CONFIG_SYS_MALLOC_LEN:
 		Size of DRAM reserved for malloc() use.
 

diff --git a/common/spl/spl.c b/common/spl/spl.c
@@ -46,10 +46,6 @@ DECLARE_BINMAN_MAGIC_SYM;
 #ifndef CONFIG_SYS_UBOOT_START
 #define CONFIG_SYS_UBOOT_START	CONFIG_TEXT_BASE
 #endif
-#ifndef CONFIG_SYS_MONITOR_LEN
-/* Unknown U-Boot size, let's assume it will not be more than 200 KB */
-#define CONFIG_SYS_MONITOR_LEN	(200 * 1024)
-#endif
 
 u32 *boot_params_ptr = NULL;
 
@@ -232,11 +228,17 @@ __weak struct legacy_img_hdr *spl_get_load_buffer(ssize_t offset, size_t size)
 	return map_sysmem(CONFIG_TEXT_BASE + offset, 0);
 }
 
+#ifdef CONFIG_SPL_RAW_IMAGE_SUPPORT
 void spl_set_header_raw_uboot(struct spl_image_info *spl_image)
 {
 	ulong u_boot_pos = spl_get_image_pos();
 
+#if CONFIG_SYS_MONITOR_LEN != 0
 	spl_image->size = CONFIG_SYS_MONITOR_LEN;
+#else
+	/* Unknown U-Boot size, let's assume it will not be more than 200 KB */
+	spl_image->size = 200 * 1024;
+#endif
 
 	/*
 	 * Binman error cases: address of the end of the previous region or the
@@ -254,6 +256,7 @@ void spl_set_header_raw_uboot(struct spl_image_info *spl_image)
 	spl_image->os = IH_OS_U_BOOT;
 	spl_image->name = "U-Boot";
 }
+#endif
 
 #if CONFIG_IS_ENABLED(LOAD_FIT_FULL)
 /* Parse and load full fitImage in SPL */

diff --git a/configs/10m50_defconfig b/configs/10m50_defconfig
@@ -9,6 +9,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="10m50_devboard"
 CONFIG_SYS_LOAD_ADDR=0xcc000000
 CONFIG_ENV_ADDR=0xF4080000
+CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_FIT=y
 CONFIG_SYS_MONITOR_BASE=0xCFF80000
 # CONFIG_AUTOBOOT is not set

diff --git a/configs/3c120_defconfig b/configs/3c120_defconfig
@@ -9,6 +9,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard"
 CONFIG_SYS_LOAD_ADDR=0xd4000000
 CONFIG_ENV_ADDR=0xE2880000
+CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_FIT=y
 CONFIG_SYS_MONITOR_BASE=0xD7F80000
 # CONFIG_AUTOBOOT is not set

diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
@@ -11,6 +11,7 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig
@@ -9,6 +9,7 @@ CONFIG_MMC1_CD_PIN="PG13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=1
 CONFIG_USB1_VBUS_PIN="PB10"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig
@@ -13,6 +13,7 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 CONFIG_VIDEO_LCD_POWER="PB10"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f
 CONFIG_SYS_I2C_SPEED=400000

diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
@@ -15,6 +15,7 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y

diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
@@ -13,6 +13,7 @@ CONFIG_SATAPWR="PC3"
 CONFIG_SPL_SPI_SUNXI=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y

diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
@@ -11,6 +11,7 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y

diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
@@ -9,6 +9,7 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

diff --git a/configs/A20-OLinuXino_MICRO-eMMC_defconfig b/configs/A20-OLinuXino_MICRO-eMMC_defconfig
@@ -11,6 +11,7 @@ CONFIG_VIDEO_VGA=y
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig
@@ -12,6 +12,7 @@ CONFIG_VIDEO_VGA=y
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig
@@ -12,6 +12,7 @@ CONFIG_USB0_VBUS_DET="PH5"
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

diff --git a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig
@@ -13,6 +13,7 @@ CONFIG_SATAPWR="PC3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

diff --git a/configs/A20-Olimex-SOM204-EVB_defconfig b/configs/A20-Olimex-SOM204-EVB_defconfig
@@ -12,6 +12,7 @@ CONFIG_SATAPWR="PC3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

diff --git a/configs/A33-OLinuXino_defconfig b/configs/A33-OLinuXino_defconfig
@@ -16,5 +16,6 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_BL_EN="PB2"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_AXP_DCDC1_VOLT=3300
 CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig
@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig
@@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

diff --git a/configs/Auxtek-T003_defconfig b/configs/Auxtek-T003_defconfig
@@ -8,6 +8,7 @@ CONFIG_DRAM_EMR1=0
 CONFIG_USB1_VBUS_PIN="PB10"
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig
@@ -6,6 +6,7 @@ CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN="PG13"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig
@@ -12,6 +12,7 @@ CONFIG_USB2_VBUS_PIN="PH23"
 # CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig
@@ -9,6 +9,7 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_NETCONSOLE=y
 CONFIG_SCSI_AHCI=y

diff --git a/configs/Bananapi_m2m_defconfig b/configs/Bananapi_m2m_defconfig
@@ -10,6 +10,7 @@ CONFIG_MMC0_CD_PIN="PB4"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_USB0_ID_DET="PH8"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y

diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig
@@ -11,6 +11,7 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_NETCONSOLE=y
 CONFIG_SCSI_AHCI=y

diff --git a/configs/CHIP_defconfig b/configs/CHIP_defconfig
@@ -7,6 +7,7 @@ CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
 CONFIG_USB0_VBUS_PIN="PB10"
 CONFIG_VIDEO_COMPOSITE=y
 CONFIG_CHIP_DIP_SCAN=y
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_DFU_RAM=y

diff --git a/configs/CHIP_pro_defconfig b/configs/CHIP_pro_defconfig
@@ -5,6 +5,7 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
 CONFIG_USB0_VBUS_PIN="PB10"
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MTDPARTS=y

diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig
@@ -7,6 +7,7 @@ CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y

diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig
@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig
@@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_BL_EN="PM1"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig
@@ -8,6 +8,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

diff --git a/configs/Cubieboard4_defconfig b/configs/Cubieboard4_defconfig
@@ -12,5 +12,6 @@ CONFIG_USB0_ID_DET="PH16"
 CONFIG_USB1_VBUS_PIN="PH14"
 CONFIG_USB3_VBUS_PIN="PH15"
 CONFIG_AXP_GPIO=y
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SYS_I2C_SUN8I_RSB=y
 CONFIG_AXP809_POWER=y
diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig
@@ -8,6 +8,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig
@@ -13,6 +13,7 @@ CONFIG_SATAPWR="PH12"
 CONFIG_GMAC_TX_DELAY=1
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y

diff --git a/configs/Cubietruck_plus_defconfig b/configs/Cubietruck_plus_defconfig
@@ -15,6 +15,7 @@ CONFIG_USB2_VBUS_PIN="PL6"
 CONFIG_I2C0_ENABLE=y
 CONFIG_AXP_GPIO=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_CONSOLE_MUX=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y

diff --git a/configs/Empire_electronix_d709_defconfig b/configs/Empire_electronix_d709_defconfig
@@ -16,6 +16,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

diff --git a/configs/Empire_electronix_m712_defconfig b/configs/Empire_electronix_m712_defconfig
@@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig
@@ -9,6 +9,7 @@ CONFIG_USB2_VBUS_PIN=""
 CONFIG_VIDEO_VGA_VIA_LCD=y
 CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y

diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig
@@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

diff --git a/configs/Itead_Ibox_A20_defconfig b/configs/Itead_Ibox_A20_defconfig
@@ -8,6 +8,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig
@@ -10,6 +10,7 @@ CONFIG_SATAPWR="PB3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

diff --git a/configs/LicheePi_Zero_defconfig b/configs/LicheePi_Zero_defconfig
@@ -5,4 +5,5 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN8I_V3S=y
 CONFIG_DRAM_CLK=360
 # CONFIG_HAS_ARMV7_SECURE_BASE is not set
+CONFIG_SYS_MONITOR_LEN=786432
 # CONFIG_NETDEVICES is not set
diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig
@@ -10,6 +10,7 @@ CONFIG_SATAPWR="PH2"
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig
@@ -8,6 +8,7 @@ CONFIG_DRAM_ZQ=122
 CONFIG_SATAPWR="PH2"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y