MIPS: Purple: Remove Purple support

The Purple SoC and eval board are not actively maintained since years. This patch removes the support completely as aggreed with Wolfgang Denk. Signed-off-by: Daniel Schwierzeck <[email protected]> Cc: Wolfgang Denk <[email protected]> Signed-off-by: Shinya Kuribayashi <[email protected]>
jadonk · Apr 2, 2011 · b38a569 · b38a569
1 parent 67a490d
commit b38a569
Show file tree

Hide file tree

Showing 19 changed files with 1 addition and 1,641 deletions.
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -919,7 +919,6 @@ Daniel Engstr
 Wolfgang Denk <[email protected]>
 
 	incaip		MIPS32 4Kc
-	purple		MIPS64 5Kc
 
 Thomas Lange <[email protected]>
 	dbau1x00	MIPS32 Au1000

diff --git a/MAKEALL b/MAKEALL
@@ -507,9 +507,7 @@ LIST_mips4kc="		\
 	vct_premium_onenand_small	\
 "
 
-LIST_mips5kc="		\
-	purple		\
-"
+LIST_mips5kc=""
 
 LIST_au1xx0="		\
 	dbau1000	\

diff --git a/arch/mips/cpu/Makefile b/arch/mips/cpu/Makefile
@@ -31,7 +31,6 @@ COBJS-y	= cpu.o interrupts.o
 
 SOBJS-$(CONFIG_INCA_IP)	+= incaip_wdt.o
 COBJS-$(CONFIG_INCA_IP)	+= asc_serial.o incaip_clock.o
-COBJS-$(CONFIG_PURPLE)	+= asc_serial.o
 COBJS-$(CONFIG_SOC_AU1X00) += au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)

diff --git a/arch/mips/cpu/asc_serial.c b/arch/mips/cpu/asc_serial.c
@@ -3,47 +3,10 @@
  */
 
 #include <config.h>
-
-#ifdef CONFIG_PURPLE
-#define	serial_init	asc_serial_init
-#define	serial_putc	asc_serial_putc
-#define	serial_puts	asc_serial_puts
-#define	serial_getc	asc_serial_getc
-#define	serial_tstc	asc_serial_tstc
-#define	serial_setbrg	asc_serial_setbrg
-#endif
-
 #include <common.h>
 #include <asm/inca-ip.h>
 #include "asc_serial.h"
 
-#ifdef CONFIG_PURPLE
-
-#undef ASC_FIFO_PRESENT
-#define TOUT_LOOP	100000
-
-/* Set base address for second FPI interrupt control register bank */
-#define SFPI_INTCON_BASEADDR	0xBF0F0000
-
-/* Register offset from base address */
-#define FBS_ISR		0x00000000	/* Interrupt status register */
-#define FBS_IMR		0x00000008	/* Interrupt mask register */
-#define FBS_IDIS	0x00000010	/* Interrupt disable register */
-
-/* Interrupt status register bits */
-#define FBS_ISR_AT	0x00000040	/* ASC transmit interrupt */
-#define FBS_ISR_AR	0x00000020	/* ASC receive interrupt */
-#define FBS_ISR_AE	0x00000010	/* ASC error interrupt */
-#define FBS_ISR_AB	0x00000008	/* ASC transmit buffer interrupt */
-#define FBS_ISR_AS      0x00000004	/* ASC start of autobaud detection interrupt */
-#define FBS_ISR_AF	0x00000002	/* ASC end of autobaud detection interrupt */
-
-#else
-
-#define ASC_FIFO_PRESENT
-
-#endif
-
 
 #define SET_BIT(reg, mask)                  reg |= (mask)
 #define CLEAR_BIT(reg, mask)                reg &= (~mask)
@@ -71,10 +34,8 @@ static volatile incaAsc_t *pAsc = (incaAsc_t *)INCA_IP_ASC;
 
 int serial_init (void)
 {
-#ifdef CONFIG_INCA_IP
     /* we have to set PMU.EN13 bit to enable an ASC device*/
     INCAASC_PMU_ENABLE(13);
-#endif
 
     /* and we have to set CLC register*/
     CLEAR_BIT(pAsc->asc_clc, ASCCLC_DISS);
@@ -86,7 +47,6 @@ int serial_init (void)
     /* select input port */
     pAsc->asc_pisel = (CONSOLE_TTY & 0x1);
 
-#ifdef ASC_FIFO_PRESENT
     /* TXFIFO's filling level */
     SET_BITFIELD(pAsc->asc_txfcon, ASCTXFCON_TXFITLMASK,
 		    ASCTXFCON_TXFITLOFF, INCAASC_TXFIFO_FL);
@@ -98,25 +58,20 @@ int serial_init (void)
 		    ASCRXFCON_RXFITLOFF, INCAASC_RXFIFO_FL);
     /* enable RXFIFO */
     SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXFEN);
-#endif
 
     /* enable error signals */
     SET_BIT(pAsc->asc_con, ASCCON_FEN);
     SET_BIT(pAsc->asc_con, ASCCON_OEN);
 
-#ifdef CONFIG_INCA_IP
     /* acknowledge ASC interrupts */
     ASC_INTERRUPTS_CLEAR(INCAASC_IRQ_LINE_ALL);
 
     /* disable ASC interrupts */
     ASC_INTERRUPTS_DISABLE(INCAASC_IRQ_LINE_ALL);
-#endif
 
-#ifdef ASC_FIFO_PRESENT
     /* set FIFOs into the transparent mode */
     SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXTMEN);
     SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXTMEN);
-#endif
 
     /* set baud rate */
     serial_setbrg();
@@ -132,11 +87,7 @@ void serial_setbrg (void)
     ulong      uiReloadValue, fdv;
     ulong      f_ASC;
 
-#ifdef CONFIG_INCA_IP
     f_ASC = incaip_get_fpiclk();
-#else
-    f_ASC = ASC_CLOCK_RATE;
-#endif
 
 #ifndef INCAASC_USE_FDV
     fdv = 2;
@@ -261,41 +212,20 @@ static int serial_setopt (void)
 
 void serial_putc (const char c)
 {
-#ifdef ASC_FIFO_PRESENT
     uint txFl = 0;
-#else
-    uint timeout = 0;
-#endif
 
     if (c == '\n') serial_putc ('\r');
 
-#ifdef ASC_FIFO_PRESENT
     /* check do we have a free space in the TX FIFO */
     /* get current filling level */
     do
     {
 	txFl = ( pAsc->asc_fstat & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF;
     }
     while ( txFl == INCAASC_TXFIFO_FULL );
-#else
-
-    while(!(*(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) &
-			   FBS_ISR_AB))
-    {
-	    if (timeout++ > TOUT_LOOP)
-	    {
-		    break;
-	    }
-    }
-#endif
 
     pAsc->asc_tbuf = c; /* write char to Transmit Buffer Register */
 
-#ifndef ASC_FIFO_PRESENT
-    *(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) = FBS_ISR_AB |
-								 FBS_ISR_AT;
-#endif
-
     /* check for errors */
     if ( pAsc->asc_con & ASCCON_OE )
     {
@@ -324,30 +254,17 @@ int serial_getc (void)
 
     c = (char)(pAsc->asc_rbuf & symbol_mask);
 
-#ifndef ASC_FIFO_PRESENT
-    *(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) = FBS_ISR_AR;
-#endif
-
     return c;
 }
 
 int serial_tstc (void)
 {
     int res = 1;
 
-#ifdef ASC_FIFO_PRESENT
     if ( (pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 )
     {
 	res = 0;
     }
-#else
-    if (!(*(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) &
-								FBS_ISR_AR))
-
-    {
-	res = 0;
-    }
-#endif
     else if ( pAsc->asc_con & ASCCON_FE )
     {
 	SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRFE);

diff --git a/arch/mips/cpu/cache.S b/arch/mips/cpu/cache.S
@@ -311,11 +311,7 @@ LEAF(dcache_enable)
 * RETURNS: N/A
 *
 */
-#if defined(CONFIG_PURPLE)
-# define	CACHE_LOCK_SIZE	(CONFIG_SYS_DCACHE_SIZE/2)
-#else
 # define	CACHE_LOCK_SIZE	(CONFIG_SYS_DCACHE_SIZE)
-#endif
 	.globl	mips_cache_lock
 	.ent	mips_cache_lock
 mips_cache_lock:

diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S
@@ -67,9 +67,6 @@ _start:
 #if defined(CONFIG_INCA_IP)
 	.word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
 	.word 0x00000000           /* phase of the flash                    */
-#elif defined(CONFIG_PURPLE)
-	.word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
-	.word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
 #else
 	RVECENT(romReserved,2)
 #endif
@@ -203,30 +200,6 @@ _start:
 	 * 128 * 8 == 1024 == 0x400
 	 * so this is address R_VEC+0x400 == 0xbfc00400
 	 */
-#ifdef CONFIG_PURPLE
-/* 0xbfc00400 */
-	.word	0xdc870000
-	.word	0xfca70000
-	.word	0x20840008
-	.word	0x20a50008
-	.word	0x20c6ffff
-	.word	0x14c0fffa
-	.word	0x00000000
-	.word	0x03e00008
-	.word	0x00000000
-	.word	0x00000000
-/* 0xbfc00428 */
-	.word	0xdc870000
-	.word	0xfca70000
-	.word	0x20840008
-	.word	0x20a50008
-	.word	0x20c6ffff
-	.word	0x14c0fffa
-	.word	0x00000000
-	.word	0x03e00008
-	.word	0x00000000
-	.word	0x00000000
-#endif /* CONFIG_PURPLE */
 	.align 4
 reset:
 
@@ -337,17 +310,12 @@ relocate_code:
 	move	a0, t1		/* a0 <-- destination addr	*/
 	sub	a1, t2, t0	/* a1 <-- size			*/
 
-	/* On the purple board we copy the code earlier in a special way
-	 * in order to solve flash problems
-	 */
-#ifndef CONFIG_PURPLE
 1:
 	lw	t3, 0(t0)
 	sw	t3, 0(t1)
 	addu	t0, 4
 	ble	t0, t2, 1b
 	addu	t1, 4		/* delay slot			*/
-#endif
 
 	/* If caches were enabled, we would have to flush them here.
 	 */

diff --git a/arch/mips/include/asm/inca-ip.h b/arch/mips/include/asm/inca-ip.h
@@ -894,12 +894,7 @@
 /*  Module      :  EBU register address and bits                       */
 /***********************************************************************/
 
-#if defined(CONFIG_INCA_IP)
 #define INCA_IP_EBU                          (0xB8000200)
-#elif defined(CONFIG_PURPLE)
-#define INCA_IP_EBU                          (0xB800D800)
-#endif
-
 /***********************************************************************/
 
 
@@ -1495,12 +1490,7 @@ If set and clear bit are written concurrently with 1, the associated bit is not
 /*  Module      :  ASC register address and bits                       */
 /***********************************************************************/
 
-#if defined(CONFIG_INCA_IP)
 #define INCA_IP_ASC                          (0xB8000400)
-#elif defined(CONFIG_PURPLE)
-#define INCA_IP_ASC                          (0xBE500000)
-#endif
-
 /***********************************************************************/
 
 

diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c
@@ -162,9 +162,6 @@ void board_init_f(ulong bootflag)
 	init_fnc_t **init_fnc_ptr;
 	ulong addr, addr_sp, len = (ulong)&uboot_end - CONFIG_SYS_MONITOR_BASE;
 	ulong *s;
-#ifdef CONFIG_PURPLE
-	void copy_code (ulong);
-#endif
 
 	/* Pointer is writable since we allocated a register for it.
 	 */
@@ -253,13 +250,6 @@ void board_init_f(ulong bootflag)
 
 	memcpy (id, (void *)gd, sizeof (gd_t));
 
-	/* On the purple board we copy the code in a special way
-	 * in order to solve flash problems
-	 */
-#ifdef CONFIG_PURPLE
-	copy_code(addr);
-#endif
-
 	relocate_code (addr_sp, id, addr);
 
 	/* NOTREACHED - relocate_code() does not return */

diff --git a/board/purple/Makefile b/board/purple/Makefile