m8c is a client for Dirtywave M8 tracker's headless mode. The application should be cross-platform ready and can be built in Linux, Windows (with MSYS2/MINGW64) and Mac OS.
Please note that routing the headless M8 USB audio isn't in the scope of this program -- if this is needed, it can be achieved with tools like jackd, alsa_in and alsa_out for example. Check out the guide in file AUDIOGUIDE.md for some instructions on routing the audio.
Many thanks to:
Trash80 for the great M8 hardware and the original font (stealth57.ttf) that was converted to a bitmap for use in the progam.
driedfruit for a wonderful little routine to blit inline bitmap fonts, https://github.com/driedfruit/SDL_inprint/
marcinbor85 for the slip handling routine, https://github.com/marcinbor85/slip
turbolent for the great Golang-based g0m8 application, which I used as reference on how the M8 serial protocol works.
Disclaimer: I'm not a coder and hardly understand C, use at your own risk :)
These instructions are tested with Raspberry Pi 3 B+ and Raspberry Pi OS with desktop (March 4 2021 release), but should apply for other Debian/Ubuntu flavors as well. The begining on the build process on OSX is slightly different at the start, and then the same once packages are installed.
The instructions assume that you already have a working Linux desktop installation with an internet connection.
Open Terminal and run the following commands:
sudo apt update && sudo apt install -y git gcc make libsdl2-dev libserialport-dev
This assumes you have installed brew
brew update && brew install -y git gcc make sdl2 libserialport
mkdir code && cd code
git clone https://github.com/laamaa/m8c.git
cd m8c
make && sudo make install
Connect the Teensy to your computer and start the program. It should automatically detect your device.
m8c
If the stars are aligned correctly, you should see the M8 screen.
Keys for controlling the progam:
- Up arrow = up
- Down arrow = down
- Left arrow = left
- Right arrow = right
- a / left shift = select
- s / space = start
- z / left alt = opt
- x / left ctrl = edit
Additional controls:
- Alt + enter = toggle full screen / windowed
- Alt + F4 = quit program
- Delete = opt+edit (deletes a row)
- Esc = toggle keyjazz on/off
- r / select+start+opt+edit = reset display (if glitches appear on the screen, use this)
Keyjazz allows to enter notes with keyboard, oldschool tracker-style. The layout is two octaves, starting from keys Z and Q. When keyjazz is active, regular a/s/z/x keys are disabled.
The program uses SDL's game controller system, which should make it work automagically with most gamepads.
Enjoy making some nice music!
Enabling the experimental GL Driver with Full KMS can boost the program's performance a bit.
The driver can be enabled with sudo raspi-config
and selecting "Advanced options" -> "GL Driver" -> "GL (Full KMS)" and rebooting.
Please note that with some configurations (for example, composite video) this can lead to not getting video output at all. If that happens, you can delete the row dtoverlay=vc4-kms-v3d
in bottom of /boot/config.txt.
Further performance improvement can be achieved by not using X11 and running the program directly in framebuffer console, but this might require doing a custom build of SDL.
nix-env -iA m8c-stable -f https://github.com/laamaa/m8c/archive/refs/heads/main.tar.gz