Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller: "Fixes here and there, a couple new device IDs, as usual: 1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei. 2) Fix 64-bit division in iwlwifi, from Arnd Bergmann. 3) Fix documentation for some eBPF helpers, from Quentin Monnet. 4) Some UAPI bpf header sync with tools, also from Quentin Monnet. 5) Set descriptor ownership bit at the right time for jumbo frames in stmmac driver, from Aaro Koskinen. 6) Set IFF_UP properly in tun driver, from Eric Dumazet. 7) Fix load/store doubleword instruction generation in powerpc eBPF JIT, from Naveen N. Rao. 8) nla_nest_start() return value checks all over, from Kangjie Lu. 9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this merge window. From Marcelo Ricardo Leitner and Xin Long. 10) Fix memory corruption with large MTUs in stmmac, from Aaro Koskinen. 11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric Dumazet. 12) Fix topology subscription cancellation in tipc, from Erik Hugne. 13) Memory leak in genetlink error path, from Yue Haibing. 14) Valid control actions properly in packet scheduler, from Davide Caratti. 15) Even if we get EEXIST, we still need to rehash if a shrink was delayed. From Herbert Xu. 16) Fix interrupt mask handling in interrupt handler of r8169, from Heiner Kallweit. 17) Fix leak in ehea driver, from Wen Yang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits) dpaa2-eth: fix race condition with bql frame accounting chelsio: use BUG() instead of BUG_ON(1) net: devlink: skip info_get op call if it is not defined in dumpit net: phy: bcm54xx: Encode link speed and activity into LEDs tipc: change to check tipc_own_id to return in tipc_net_stop net: usb: aqc111: Extend HWID table by QNAP device net: sched: Kconfig: update reference link for PIE net: dsa: qca8k: extend slave-bus implementations net: dsa: qca8k: remove leftover phy accessors dt-bindings: net: dsa: qca8k: support internal mdio-bus dt-bindings: net: dsa: qca8k: fix example net: phy: don't clear BMCR in genphy_soft_reset bpf, libbpf: clarify bump in libbpf version info bpf, libbpf: fix version info and add it to shared object rxrpc: avoid clang -Wuninitialized warning tipc: tipc clang warning net: sched: fix cleanup NULL pointer exception in act_mirr r8169: fix cable re-plugging issue net: ethernet: ti: fix possible object reference leak net: ibm: fix possible object reference leak ...
jangid · Mar 27, 2019 · 1a9df9e · 1a9df9e
2 parents 14c741d + 8c838f5
commit 1a9df9e
Show file tree

Hide file tree

Showing 182 changed files with 3,121 additions and 1,137 deletions.
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
@@ -12,10 +12,15 @@ Required properties:
 Subnodes:
 
 The integrated switch subnode should be specified according to the binding
-described in dsa/dsa.txt. As the QCA8K switches do not have a N:N mapping of
-port and PHY id, each subnode describing a port needs to have a valid phandle
-referencing the internal PHY connected to it. The CPU port of this switch is
-always port 0.
+described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external
+mdio-bus each subnode describing a port needs to have a valid phandle
+referencing the internal PHY it is connected to. This is because there's no
+N:N mapping of port and PHY id.
+
+Don't use mixed external and internal mdio-bus configurations, as this is
+not supported by the hardware.
+
+The CPU port of this switch is always port 0.
 
 A CPU port node has the following optional node:
 
@@ -31,8 +36,9 @@ For QCA8K the 'fixed-link' sub-node supports only the following properties:
 - 'full-duplex' (boolean, optional), to indicate that full duplex is
   used. When absent, half duplex is assumed.
 
-Example:
+Examples:
 
+for the external mdio-bus configuration:
 
 	&mdio0 {
 		phy_port1: phy@0 {
@@ -55,12 +61,12 @@ Example:
 			reg = <4>;
 		};
 
-		switch0@0 {
+		switch@10 {
 			compatible = "qca,qca8337";
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			reg = <0>;
+			reg = <0x10>;
 
 			ports {
 				#address-cells = <1>;
@@ -108,3 +114,56 @@ Example:
 			};
 		};
 	};
+
+for the internal master mdio-bus configuration:
+
+	&mdio0 {
+		switch@10 {
+			compatible = "qca,qca8337";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0x10>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+					fixed-link {
+						speed = 1000;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "lan4";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "wan";
+				};
+			};
+		};
+	};
diff --git a/Documentation/networking/msg_zerocopy.rst b/Documentation/networking/msg_zerocopy.rst
@@ -50,7 +50,7 @@ the excellent reporting over at LWN.net or read the original code.
 
   patchset
     [PATCH net-next v4 0/9] socket sendmsg MSG_ZEROCOPY
-    http://lkml.kernel.org/r/[email protected]
+    https://lkml.kernel.org/netdev/[email protected]
 
 
 Interface

diff --git a/Documentation/networking/netdev-FAQ.rst b/Documentation/networking/netdev-FAQ.rst
@@ -131,6 +131,19 @@ it to the maintainer to figure out what is the most recent and current
 version that should be applied. If there is any doubt, the maintainer
 will reply and ask what should be done.
 
+Q: I made changes to only a few patches in a patch series should I resend only those changed?
+--------------------------------------------------------------------------------------------
+A: No, please resend the entire patch series and make sure you do number your
+patches such that it is clear this is the latest and greatest set of patches
+that can be applied.
+
+Q: I submitted multiple versions of a patch series and it looks like a version other than the last one has been accepted, what should I do?
+-------------------------------------------------------------------------------------------------------------------------------------------
+A: There is no revert possible, once it is pushed out, it stays like that.
+Please send incremental versions on top of what has been merged in order to fix
+the patches the way they would look like if your latest patch series was to be
+merged.
+
 Q: How can I tell what patches are queued up for backporting to the various stable releases?
 --------------------------------------------------------------------------------------------
 A: Normally Greg Kroah-Hartman collects stable commits himself, but for

diff --git a/Documentation/networking/nf_flowtable.txt b/Documentation/networking/nf_flowtable.txt
@@ -44,10 +44,10 @@ including the Netfilter hooks and the flowtable fastpath bypass.
      /         \    /          \     |Routing |   /            \
   -->  ingress  ---> prerouting ---> |decision|   | postrouting |--> neigh_xmit
      \_________/    \__________/     ----------   \____________/          ^
-       |      ^          |               |               ^                |
-   flowtable  |          |          ____\/___            |                |
-       |      |          |         /         \           |                |
-    __\/___   |          --------->| forward |------------                |
+       |      ^                          |               ^                |
+   flowtable  |                     ____\/___            |                |
+       |      |                    /         \           |                |
+    __\/___   |                    | forward |------------                |
     |-----|   |                    \_________/                            |
     |-----|   |                 'flow offload' rule                       |
     |-----|   |                   adds entry to                           |

diff --git a/Documentation/networking/snmp_counter.rst b/Documentation/networking/snmp_counter.rst
@@ -413,7 +413,7 @@ algorithm.
 .. _F-RTO: https://tools.ietf.org/html/rfc5682
 
 TCP Fast Path
-============
+=============
 When kernel receives a TCP packet, it has two paths to handler the
 packet, one is fast path, another is slow path. The comment in kernel
 code provides a good explanation of them, I pasted them below::
@@ -681,6 +681,7 @@ The TCP stack receives an out of order duplicate packet, so it sends a
 DSACK to the sender.
 
 * TcpExtTCPDSACKRecv
+
 The TCP stack receives a DSACK, which indicates an acknowledged
 duplicate packet is received.
 
@@ -690,7 +691,7 @@ The TCP stack receives a DSACK, which indicate an out of order
 duplicate packet is received.
 
 invalid SACK and DSACK
-====================
+======================
 When a SACK (or DSACK) block is invalid, a corresponding counter would
 be updated. The validation method is base on the start/end sequence
 number of the SACK block. For more details, please refer the comment
@@ -704,11 +705,13 @@ explaination:
 .. _Add counters for discarded SACK blocks: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=18f02545a9a16c9a89778b91a162ad16d510bb32
 
 * TcpExtTCPSACKDiscard
+
 This counter indicates how many SACK blocks are invalid. If the invalid
 SACK block is caused by ACK recording, the TCP stack will only ignore
 it and won't update this counter.
 
 * TcpExtTCPDSACKIgnoredOld and TcpExtTCPDSACKIgnoredNoUndo
+
 When a DSACK block is invalid, one of these two counters would be
 updated. Which counter will be updated depends on the undo_marker flag
 of the TCP socket. If the undo_marker is not set, the TCP stack isn't
@@ -719,7 +722,7 @@ will be updated. If the undo_marker is set, TcpExtTCPDSACKIgnoredOld
 will be updated. As implied in its name, it might be an old packet.
 
 SACK shift
-=========
+==========
 The linux networking stack stores data in sk_buff struct (skb for
 short). If a SACK block acrosses multiple skb, the TCP stack will try
 to re-arrange data in these skb. E.g. if a SACK block acknowledges seq
@@ -730,12 +733,15 @@ seq 14 to 20. All data in skb2 will be moved to skb1, and skb2 will be
 discard, this operation is 'merge'.
 
 * TcpExtTCPSackShifted
+
 A skb is shifted
 
 * TcpExtTCPSackMerged
+
 A skb is merged
 
 * TcpExtTCPSackShiftFallback
+
 A skb should be shifted or merged, but the TCP stack doesn't do it for
 some reasons.
 

diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
@@ -302,13 +302,15 @@
 /* Misc instructions for BPF compiler */
 #define PPC_INST_LBZ			0x88000000
 #define PPC_INST_LD			0xe8000000
+#define PPC_INST_LDX			0x7c00002a
 #define PPC_INST_LHZ			0xa0000000
 #define PPC_INST_LWZ			0x80000000
 #define PPC_INST_LHBRX			0x7c00062c
 #define PPC_INST_LDBRX			0x7c000428
 #define PPC_INST_STB			0x98000000
 #define PPC_INST_STH			0xb0000000
 #define PPC_INST_STD			0xf8000000
+#define PPC_INST_STDX			0x7c00012a
 #define PPC_INST_STDU			0xf8000001
 #define PPC_INST_STW			0x90000000
 #define PPC_INST_STWU			0x94000000

diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h
@@ -51,6 +51,8 @@
 #define PPC_LIS(r, i)		PPC_ADDIS(r, 0, i)
 #define PPC_STD(r, base, i)	EMIT(PPC_INST_STD | ___PPC_RS(r) |	      \
 				     ___PPC_RA(base) | ((i) & 0xfffc))
+#define PPC_STDX(r, base, b)	EMIT(PPC_INST_STDX | ___PPC_RS(r) |	      \
+				     ___PPC_RA(base) | ___PPC_RB(b))
 #define PPC_STDU(r, base, i)	EMIT(PPC_INST_STDU | ___PPC_RS(r) |	      \
 				     ___PPC_RA(base) | ((i) & 0xfffc))
 #define PPC_STW(r, base, i)	EMIT(PPC_INST_STW | ___PPC_RS(r) |	      \
@@ -65,7 +67,9 @@
 #define PPC_LBZ(r, base, i)	EMIT(PPC_INST_LBZ | ___PPC_RT(r) |	      \
 				     ___PPC_RA(base) | IMM_L(i))
 #define PPC_LD(r, base, i)	EMIT(PPC_INST_LD | ___PPC_RT(r) |	      \
-				     ___PPC_RA(base) | IMM_L(i))
+				     ___PPC_RA(base) | ((i) & 0xfffc))
+#define PPC_LDX(r, base, b)	EMIT(PPC_INST_LDX | ___PPC_RT(r) |	      \
+				     ___PPC_RA(base) | ___PPC_RB(b))
 #define PPC_LWZ(r, base, i)	EMIT(PPC_INST_LWZ | ___PPC_RT(r) |	      \
 				     ___PPC_RA(base) | IMM_L(i))
 #define PPC_LHZ(r, base, i)	EMIT(PPC_INST_LHZ | ___PPC_RT(r) |	      \
@@ -85,17 +89,6 @@
 					___PPC_RA(a) | ___PPC_RB(b))
 #define PPC_BPF_STDCX(s, a, b)	EMIT(PPC_INST_STDCX | ___PPC_RS(s) |	      \
 					___PPC_RA(a) | ___PPC_RB(b))
-
-#ifdef CONFIG_PPC64
-#define PPC_BPF_LL(r, base, i) do { PPC_LD(r, base, i); } while(0)
-#define PPC_BPF_STL(r, base, i) do { PPC_STD(r, base, i); } while(0)
-#define PPC_BPF_STLU(r, base, i) do { PPC_STDU(r, base, i); } while(0)
-#else
-#define PPC_BPF_LL(r, base, i) do { PPC_LWZ(r, base, i); } while(0)
-#define PPC_BPF_STL(r, base, i) do { PPC_STW(r, base, i); } while(0)
-#define PPC_BPF_STLU(r, base, i) do { PPC_STWU(r, base, i); } while(0)
-#endif
-
 #define PPC_CMPWI(a, i)		EMIT(PPC_INST_CMPWI | ___PPC_RA(a) | IMM_L(i))
 #define PPC_CMPDI(a, i)		EMIT(PPC_INST_CMPDI | ___PPC_RA(a) | IMM_L(i))
 #define PPC_CMPW(a, b)		EMIT(PPC_INST_CMPW | ___PPC_RA(a) |	      \

diff --git a/arch/powerpc/net/bpf_jit32.h b/arch/powerpc/net/bpf_jit32.h
@@ -122,6 +122,10 @@ DECLARE_LOAD_FUNC(sk_load_byte_msh);
 #define PPC_NTOHS_OFFS(r, base, i)	PPC_LHZ_OFFS(r, base, i)
 #endif
 
+#define PPC_BPF_LL(r, base, i) do { PPC_LWZ(r, base, i); } while(0)
+#define PPC_BPF_STL(r, base, i) do { PPC_STW(r, base, i); } while(0)
+#define PPC_BPF_STLU(r, base, i) do { PPC_STWU(r, base, i); } while(0)
+
 #define SEEN_DATAREF 0x10000 /* might call external helpers */
 #define SEEN_XREG    0x20000 /* X reg is used */
 #define SEEN_MEM     0x40000 /* SEEN_MEM+(1<<n) = use mem[n] for temporary

diff --git a/arch/powerpc/net/bpf_jit64.h b/arch/powerpc/net/bpf_jit64.h
@@ -68,6 +68,26 @@ static const int b2p[] = {
 /* PPC NVR range -- update this if we ever use NVRs below r27 */
 #define BPF_PPC_NVR_MIN		27
 
+/*
+ * WARNING: These can use TMP_REG_2 if the offset is not at word boundary,
+ * so ensure that it isn't in use already.
+ */
+#define PPC_BPF_LL(r, base, i) do {					      \
+				if ((i) % 4) {				      \
+					PPC_LI(b2p[TMP_REG_2], (i));	      \
+					PPC_LDX(r, base, b2p[TMP_REG_2]);     \
+				} else					      \
+					PPC_LD(r, base, i);		      \
+				} while(0)
+#define PPC_BPF_STL(r, base, i) do {					      \
+				if ((i) % 4) {				      \
+					PPC_LI(b2p[TMP_REG_2], (i));	      \
+					PPC_STDX(r, base, b2p[TMP_REG_2]);    \
+				} else					      \
+					PPC_STD(r, base, i);		      \
+				} while(0)
+#define PPC_BPF_STLU(r, base, i) do { PPC_STDU(r, base, i); } while(0)
+
 #define SEEN_FUNC	0x1000 /* might call external helpers */
 #define SEEN_STACK	0x2000 /* uses BPF stack */
 #define SEEN_TAILCALL	0x4000 /* uses tail calls */

diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
@@ -252,7 +252,7 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32
 	 * if (tail_call_cnt > MAX_TAIL_CALL_CNT)
 	 *   goto out;
 	 */
-	PPC_LD(b2p[TMP_REG_1], 1, bpf_jit_stack_tailcallcnt(ctx));
+	PPC_BPF_LL(b2p[TMP_REG_1], 1, bpf_jit_stack_tailcallcnt(ctx));
 	PPC_CMPLWI(b2p[TMP_REG_1], MAX_TAIL_CALL_CNT);
 	PPC_BCC(COND_GT, out);
 
@@ -265,7 +265,7 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32
 	/* prog = array->ptrs[index]; */
 	PPC_MULI(b2p[TMP_REG_1], b2p_index, 8);
 	PPC_ADD(b2p[TMP_REG_1], b2p[TMP_REG_1], b2p_bpf_array);
-	PPC_LD(b2p[TMP_REG_1], b2p[TMP_REG_1], offsetof(struct bpf_array, ptrs));
+	PPC_BPF_LL(b2p[TMP_REG_1], b2p[TMP_REG_1], offsetof(struct bpf_array, ptrs));
 
 	/*
 	 * if (prog == NULL)
@@ -275,7 +275,7 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32
 	PPC_BCC(COND_EQ, out);
 
 	/* goto *(prog->bpf_func + prologue_size); */
-	PPC_LD(b2p[TMP_REG_1], b2p[TMP_REG_1], offsetof(struct bpf_prog, bpf_func));
+	PPC_BPF_LL(b2p[TMP_REG_1], b2p[TMP_REG_1], offsetof(struct bpf_prog, bpf_func));
 #ifdef PPC64_ELF_ABI_v1
 	/* skip past the function descriptor */
 	PPC_ADDI(b2p[TMP_REG_1], b2p[TMP_REG_1],
@@ -606,7 +606,7 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 				 * the instructions generated will remain the
 				 * same across all passes
 				 */
-				PPC_STD(dst_reg, 1, bpf_jit_stack_local(ctx));
+				PPC_BPF_STL(dst_reg, 1, bpf_jit_stack_local(ctx));
 				PPC_ADDI(b2p[TMP_REG_1], 1, bpf_jit_stack_local(ctx));
 				PPC_LDBRX(dst_reg, 0, b2p[TMP_REG_1]);
 				break;
@@ -662,7 +662,7 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 				PPC_LI32(b2p[TMP_REG_1], imm);
 				src_reg = b2p[TMP_REG_1];
 			}
-			PPC_STD(src_reg, dst_reg, off);
+			PPC_BPF_STL(src_reg, dst_reg, off);
 			break;
 
 		/*
@@ -709,7 +709,7 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 			break;
 		/* dst = *(u64 *)(ul) (src + off) */
 		case BPF_LDX | BPF_MEM | BPF_DW:
-			PPC_LD(dst_reg, src_reg, off);
+			PPC_BPF_LL(dst_reg, src_reg, off);
 			break;
 
 		/*

diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -4365,7 +4365,8 @@ setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
 	if (m->clock2)
 		test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
 
-	if (ent->device == 0xB410) {
+	if (ent->vendor == PCI_VENDOR_ID_DIGIUM &&
+	    ent->device == PCI_DEVICE_ID_DIGIUM_HFC4S) {
 		test_and_set_bit(HFC_CHIP_B410P, &hc->chip);
 		test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
 		test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
@@ -216,8 +216,8 @@ config GENEVE
 
 config GTP
 	tristate "GPRS Tunneling Protocol datapath (GTP-U)"
-	depends on INET && NET_UDP_TUNNEL
-	select NET_IP_TUNNEL
+	depends on INET
+	select NET_UDP_TUNNEL
 	---help---
 	  This allows one to create gtp virtual interfaces that provide
 	  the GPRS Tunneling Protocol datapath (GTP-U). This tunneling protocol