Merge tag 'mmc-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "Here's quite a few MMC fixes intended for v5.2-rc6. This time it also
  contains fixes for a WiFi driver, which device is attached to the SDIO
  interface. Patches for the WiFi driver have been acked by the
  corresponding maintainers.

  Summary:

  MMC core:
   - Make switch to eMMC HS400 more robust for some controllers
   - Add two SDIO func API to manage re-tuning constraints
   - Prevent processing SDIO IRQs when the card is suspended

  MMC host:
   - sdhi: Disallow broken HS400 for M3-W ES1.2, RZ/G2M and V3H
   - mtk-sd: Fixup support for SDIO IRQs
   - sdhci-pci-o2micro: Fixup support for tuning

  Wireless BRCMFMAC (SDIO):
   - Deal with expected transmission errors related to the idle states
     (handled by the Always-On-Subsystem or AOS) on the SDIO-based WiFi
     on rk3288-veyron-minnie, rk3288-veyron-speedy and
     rk3288-veyron-mickey"

* tag 'mmc-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Prevent processing SDIO IRQs when the card is suspended
  mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning
  brcmfmac: sdio: Don't tune while the card is off
  mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()
  brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  mmc: core: API to temporarily disable retuning for SDIO CRC errors
  Revert "brcmfmac: disable command decode in sdio_aos"
  mmc: mediatek: fix SDIO IRQ detection issue
  mmc: mediatek: fix SDIO IRQ interrupt handle flow
  mmc: core: complete HS400 before checking status
  mmc: sdhi: disallow HS400 for M3-W ES1.2, RZ/G2M, and V3H

drivers/mmc/core/core.c

@@ -144,8 +144,9 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
 	int err = cmd->error;
 
 	/* Flag re-tuning needed on CRC errors */
-	if ((cmd->opcode != MMC_SEND_TUNING_BLOCK &&
-	    cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
+	if (cmd->opcode != MMC_SEND_TUNING_BLOCK &&
+	    cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200 &&
+	    !host->retune_crc_disable &&
 	    (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) ||
 	    (mrq->data && mrq->data->error == -EILSEQ) ||
 	    (mrq->stop && mrq->stop->error == -EILSEQ)))

drivers/mmc/core/mmc.c

@@ -1212,13 +1212,13 @@ static int mmc_select_hs400(struct mmc_card *card)
 	mmc_set_timing(host, MMC_TIMING_MMC_HS400);
 	mmc_set_bus_speed(card);
 
+	if (host->ops->hs400_complete)
+		host->ops->hs400_complete(host);
+
 	err = mmc_switch_status(card);
 	if (err)
 		goto out_err;
 
-	if (host->ops->hs400_complete)
-		host->ops->hs400_complete(host);
-
 	return 0;
 
 out_err:

drivers/mmc/core/sdio.c

@@ -937,6 +937,10 @@ static int mmc_sdio_pre_suspend(struct mmc_host *host)
  */
 static int mmc_sdio_suspend(struct mmc_host *host)
 {
+	/* Prevent processing of SDIO IRQs in suspended state. */
+	mmc_card_set_suspended(host->card);
+	cancel_delayed_work_sync(&host->sdio_irq_work);
+
 	mmc_claim_host(host);
 
 	if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host))
@@ -985,13 +989,20 @@ static int mmc_sdio_resume(struct mmc_host *host)
 		err = sdio_enable_4bit_bus(host->card);
 	}
 
-	if (!err && host->sdio_irqs) {
+	if (err)
+		goto out;
+
+	/* Allow SDIO IRQs to be processed again. */
+	mmc_card_clr_suspended(host->card);
+
+	if (host->sdio_irqs) {
 		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD))
 			wake_up_process(host->sdio_irq_thread);
 		else if (host->caps & MMC_CAP_SDIO_IRQ)
 			host->ops->enable_sdio_irq(host, 1);
 	}
 
+out:
 	mmc_release_host(host);
 
 	host->pm_flags &= ~MMC_PM_KEEP_POWER;

drivers/mmc/core/sdio_io.c

@@ -15,6 +15,7 @@
 #include "sdio_ops.h"
 #include "core.h"
 #include "card.h"
+#include "host.h"
 
 /**
  *	sdio_claim_host - exclusively claim a bus for a certain SDIO function
@@ -734,3 +735,79 @@ int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(sdio_set_host_pm_flags);
+
+/**
+ *	sdio_retune_crc_disable - temporarily disable retuning on CRC errors
+ *	@func: SDIO function attached to host
+ *
+ *	If the SDIO card is known to be in a state where it might produce
+ *	CRC errors on the bus in response to commands (like if we know it is
+ *	transitioning between power states), an SDIO function driver can
+ *	call this function to temporarily disable the SD/MMC core behavior of
+ *	triggering an automatic retuning.
+ *
+ *	This function should be called while the host is claimed and the host
+ *	should remain claimed until sdio_retune_crc_enable() is called.
+ *	Specifically, the expected sequence of calls is:
+ *	- sdio_claim_host()
+ *	- sdio_retune_crc_disable()
+ *	- some number of calls like sdio_writeb() and sdio_readb()
+ *	- sdio_retune_crc_enable()
+ *	- sdio_release_host()
+ */
+void sdio_retune_crc_disable(struct sdio_func *func)
+{
+	func->card->host->retune_crc_disable = true;
+}
+EXPORT_SYMBOL_GPL(sdio_retune_crc_disable);
+
+/**
+ *	sdio_retune_crc_enable - re-enable retuning on CRC errors
+ *	@func: SDIO function attached to host
+ *
+ *	This is the compement to sdio_retune_crc_disable().
+ */
+void sdio_retune_crc_enable(struct sdio_func *func)
+{
+	func->card->host->retune_crc_disable = false;
+}
+EXPORT_SYMBOL_GPL(sdio_retune_crc_enable);
+
+/**
+ *	sdio_retune_hold_now - start deferring retuning requests till release
+ *	@func: SDIO function attached to host
+ *
+ *	This function can be called if it's currently a bad time to do
+ *	a retune of the SDIO card.  Retune requests made during this time
+ *	will be held and we'll actually do the retune sometime after the
+ *	release.
+ *
+ *	This function could be useful if an SDIO card is in a power state
+ *	where it can respond to a small subset of commands that doesn't
+ *	include the retuning command.  Care should be taken when using
+ *	this function since (presumably) the retuning request we might be
+ *	deferring was made for a good reason.
+ *
+ *	This function should be called while the host is claimed.
+ */
+void sdio_retune_hold_now(struct sdio_func *func)
+{
+	mmc_retune_hold_now(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_retune_hold_now);
+
+/**
+ *	sdio_retune_release - signal that it's OK to retune now
+ *	@func: SDIO function attached to host
+ *
+ *	This is the complement to sdio_retune_hold_now().  Calling this
+ *	function won't make a retune happen right away but will allow
+ *	them to be scheduled normally.
+ *
+ *	This function should be called while the host is claimed.
+ */
+void sdio_retune_release(struct sdio_func *func)
+{
+	mmc_retune_release(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_retune_release);

drivers/mmc/core/sdio_irq.c

@@ -34,6 +34,10 @@ static int process_sdio_pending_irqs(struct mmc_host *host)
 	unsigned char pending;
 	struct sdio_func *func;
 
+	/* Don't process SDIO IRQs if the card is suspended. */
+	if (mmc_card_suspended(card))
+		return 0;
+
 	/*
 	 * Optimization, if there is only 1 function interrupt registered
 	 * and we know an IRQ was signaled then call irq handler directly.

drivers/mmc/host/mtk-sd.c

@@ -1023,6 +1023,8 @@ static void msdc_request_done(struct msdc_host *host, struct mmc_request *mrq)
 	msdc_track_cmd_data(host, mrq->cmd, mrq->data);
 	if (mrq->data)
 		msdc_unprepare_data(host, mrq);
+	if (host->error)
+		msdc_reset_hw(host);
 	mmc_request_done(host->mmc, mrq);
 }
 
@@ -1375,24 +1377,25 @@ static void msdc_request_timeout(struct work_struct *work)
 	}
 }
 
-static void __msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
+static void __msdc_enable_sdio_irq(struct msdc_host *host, int enb)
 {
-	unsigned long flags;
-	struct msdc_host *host = mmc_priv(mmc);
-
-	spin_lock_irqsave(&host->lock, flags);
-	if (enb)
+	if (enb) {
 		sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
-	else
+		sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+	} else {
 		sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
-	spin_unlock_irqrestore(&host->lock, flags);
+		sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+	}
 }
 
 static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
 {
+	unsigned long flags;
 	struct msdc_host *host = mmc_priv(mmc);
 
-	__msdc_enable_sdio_irq(mmc, enb);
+	spin_lock_irqsave(&host->lock, flags);
+	__msdc_enable_sdio_irq(host, enb);
+	spin_unlock_irqrestore(&host->lock, flags);
 
 	if (enb)
 		pm_runtime_get_noresume(host->dev);
@@ -1414,6 +1417,8 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
 		spin_lock_irqsave(&host->lock, flags);
 		events = readl(host->base + MSDC_INT);
 		event_mask = readl(host->base + MSDC_INTEN);
+		if ((events & event_mask) & MSDC_INT_SDIOIRQ)
+			__msdc_enable_sdio_irq(host, 0);
 		/* clear interrupts */
 		writel(events & event_mask, host->base + MSDC_INT);
 
@@ -1422,10 +1427,8 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
 		data = host->data;
 		spin_unlock_irqrestore(&host->lock, flags);
 
-		if ((events & event_mask) & MSDC_INT_SDIOIRQ) {
-			__msdc_enable_sdio_irq(host->mmc, 0);
+		if ((events & event_mask) & MSDC_INT_SDIOIRQ)
 			sdio_signal_irq(host->mmc);
-		}
 
 		if ((events & event_mask) & MSDC_INT_CDSC) {
 			if (host->internal_cd)
@@ -1564,10 +1567,7 @@ static void msdc_init_hw(struct msdc_host *host)
 	sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIO);
 
 	/* Config SDIO device detect interrupt function */
-	if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
-		sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
-	else
-		sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+	sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
 
 	/* Configure to default data timeout */
 	sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
@@ -2095,7 +2095,12 @@ static void msdc_hw_reset(struct mmc_host *mmc)
 
 static void msdc_ack_sdio_irq(struct mmc_host *mmc)
 {
-	__msdc_enable_sdio_irq(mmc, 1);
+	unsigned long flags;
+	struct msdc_host *host = mmc_priv(mmc);
+
+	spin_lock_irqsave(&host->lock, flags);
+	__msdc_enable_sdio_irq(host, 1);
+	spin_unlock_irqrestore(&host->lock, flags);
 }
 
 static int msdc_get_cd(struct mmc_host *mmc)

drivers/mmc/host/renesas_sdhi_core.c

@@ -620,11 +620,16 @@ static const struct renesas_sdhi_quirks sdhi_quirks_h3_es2 = {
 	.hs400_4taps = true,
 };
 
+static const struct renesas_sdhi_quirks sdhi_quirks_nohs400 = {
+	.hs400_disabled = true,
+};
+
 static const struct soc_device_attribute sdhi_quirks_match[]  = {
 	{ .soc_id = "r8a7795", .revision = "ES1.*", .data = &sdhi_quirks_h3_m3w_es1 },
 	{ .soc_id = "r8a7795", .revision = "ES2.0", .data = &sdhi_quirks_h3_es2 },
-	{ .soc_id = "r8a7796", .revision = "ES1.0", .data = &sdhi_quirks_h3_m3w_es1 },
-	{ .soc_id = "r8a7796", .revision = "ES1.1", .data = &sdhi_quirks_h3_m3w_es1 },
+	{ .soc_id = "r8a7796", .revision = "ES1.[012]", .data = &sdhi_quirks_h3_m3w_es1 },
+	{ .soc_id = "r8a774a1", .revision = "ES1.[012]", .data = &sdhi_quirks_h3_m3w_es1 },
+	{ .soc_id = "r8a77980", .data = &sdhi_quirks_nohs400 },
 	{ /* Sentinel. */ },
 };
 

drivers/mmc/host/sdhci-pci-o2micro.c

@@ -115,6 +115,7 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	 */
 	if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
 		current_bus_width = mmc->ios.bus_width;
+		mmc->ios.bus_width = MMC_BUS_WIDTH_4;
 		sdhci_set_bus_width(host, MMC_BUS_WIDTH_4);
 	}
 
@@ -126,8 +127,10 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
 
 	sdhci_end_tuning(host);
 
-	if (current_bus_width == MMC_BUS_WIDTH_8)
+	if (current_bus_width == MMC_BUS_WIDTH_8) {
+		mmc->ios.bus_width = MMC_BUS_WIDTH_8;
 		sdhci_set_bus_width(host, current_bus_width);
+	}
 
 	host->flags &= ~SDHCI_HS400_TUNING;
 	return 0;

drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c

@@ -678,6 +678,12 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 
 	brcmf_dbg(TRACE, "Enter: on=%d\n", on);
 
+	sdio_retune_crc_disable(bus->sdiodev->func1);
+
+	/* Cannot re-tune if device is asleep; defer till we're awake */
+	if (on)
+		sdio_retune_hold_now(bus->sdiodev->func1);
+
 	wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
 	/* 1st KSO write goes to AOS wake up core if device is asleep  */
 	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);
@@ -738,6 +744,11 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 	if (try_cnt > MAX_KSO_ATTEMPTS)
 		brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err);
 
+	if (on)
+		sdio_retune_release(bus->sdiodev->func1);
+
+	sdio_retune_crc_enable(bus->sdiodev->func1);
+
 	return err;
 }
 
@@ -3375,11 +3386,7 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
 
 static bool brcmf_sdio_aos_no_decode(struct brcmf_sdio *bus)
 {
-	if (bus->ci->chip == CY_CC_43012_CHIP_ID ||
-	    bus->ci->chip == CY_CC_4373_CHIP_ID ||
-	    bus->ci->chip == BRCM_CC_4339_CHIP_ID ||
-	    bus->ci->chip == BRCM_CC_4345_CHIP_ID ||
-	    bus->ci->chip == BRCM_CC_4354_CHIP_ID)
+	if (bus->ci->chip == CY_CC_43012_CHIP_ID)
 		return true;
 	else
 		return false;

include/linux/mmc/host.h

@@ -398,6 +398,7 @@ struct mmc_host {
 	unsigned int		retune_now:1;	/* do re-tuning at next req */
 	unsigned int		retune_paused:1; /* re-tuning is temporarily disabled */
 	unsigned int		use_blk_mq:1;	/* use blk-mq */
+	unsigned int		retune_crc_disable:1; /* don't trigger retune upon crc */
 
 	int			rescan_disable;	/* disable card detection */
 	int			rescan_entered;	/* used with nonremovable devices */

include/linux/mmc/sdio_func.h

@@ -167,4 +167,10 @@ extern void sdio_f0_writeb(struct sdio_func *func, unsigned char b,
 extern mmc_pm_flag_t sdio_get_host_pm_caps(struct sdio_func *func);
 extern int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags);
 
+extern void sdio_retune_crc_disable(struct sdio_func *func);
+extern void sdio_retune_crc_enable(struct sdio_func *func);
+
+extern void sdio_retune_hold_now(struct sdio_func *func);
+extern void sdio_retune_release(struct sdio_func *func);
+
 #endif /* LINUX_MMC_SDIO_FUNC_H */