Merge branches 'clk-hisi', 'clk-lochnagar', 'clk-allwinner', 'clk-roc…

…kchip' and 'clk-qoriq' into clk-next

 - Mark UFS clk as critical on Hi-Silicon hi3660 SoCs
 - Support for Cirrus Logic Lochnagar clks

* clk-hisi:
  clk: hi3660: Mark clk_gate_ufs_subsys as critical

* clk-lochnagar:
  clk: lochnagar: Add support for the Cirrus Logic Lochnagar
  clk: lochnagar: Add initial binding documentation

* clk-allwinner:
  clk: sunxi-ng: sun5i: Export the MBUS clock
  clk: sunxi-ng: a83t: Add pll-video0 as parent of csi-mclk
  clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate
  clk: sunxi-ng: h6: Preset hdmi-cec clock parent
  clk: sunxi: Add Kconfig options
  clk: sunxi-ng: f1c100s: fix USB PHY gate bit offset
  clk: sunxi-ng: Allow DE clock to set parent rate

* clk-rockchip:
  clk: rockchip: undo several noc and special clocks as critical on rk3288
  clk: rockchip: add a COMPOSITE_DIV_OFFSET clock-type
  clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288
  clk: rockchip: Limit use of USB PHY clock to USB on rk3288
  clk: rockchip: Fix video codec clocks on rk3288
  clk: rockchip: Make rkpwm a critical clock on rk3288
  clk: rockchip: fix wrong clock definitions for rk3328

* clk-qoriq:
  clk: qoriq: increase array size of cmux_to_group
  dt-bindings: qoriq-clock: Add ls1028a chip compatible string
  clk: qoriq: Add ls1028a clock configuration
  clk: qoriq: add more PLL divider clocks support
  dt-bindings: qoriq-clock: add more PLL divider clocks support

Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt

@@ -0,0 +1,93 @@
+Cirrus Logic Lochnagar Audio Development Board
+
+Lochnagar is an evaluation and development board for Cirrus Logic
+Smart CODEC and Amp devices. It allows the connection of most Cirrus
+Logic devices on mini-cards, as well as allowing connection of
+various application processor systems to provide a full evaluation
+platform.  Audio system topology, clocking and power can all be
+controlled through the Lochnagar, allowing the device under test
+to be used in a variety of possible use cases.
+
+This binding document describes the binding for the clock portion of
+the driver.
+
+Also see these documents for generic binding information:
+  [1] Clock : ../clock/clock-bindings.txt
+
+And these for relevant defines:
+  [2] include/dt-bindings/clock/lochnagar.h
+
+This binding must be part of the Lochnagar MFD binding:
+  [3] ../mfd/cirrus,lochnagar.txt
+
+Required properties:
+
+  - compatible : One of the following strings:
+                 "cirrus,lochnagar1-clk"
+                 "cirrus,lochnagar2-clk"
+
+  - #clock-cells : Must be 1. The first cell indicates the clock
+    number, see [2] for available clocks and [1].
+
+Optional properties:
+
+  - clocks : Must contain an entry for each clock in clock-names.
+  - clock-names : May contain entries for each of the following
+    clocks:
+     - ln-cdc-clkout : Output clock from CODEC card.
+     - ln-dsp-clkout : Output clock from DSP card.
+     - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional
+       input audio clocks from host system.
+     - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from
+       external connector.
+     - ln-spdif-clkout : Optional input audio clock from SPDIF.
+     - ln-adat-mclk : Optional input audio clock from ADAT.
+     - ln-pmic-32k : On board fixed clock.
+     - ln-clk-12m : On board fixed clock.
+     - ln-clk-11m : On board fixed clock.
+     - ln-clk-24m : On board fixed clock.
+     - ln-clk-22m : On board fixed clock.
+     - ln-clk-8m : On board fixed clock.
+     - ln-usb-clk-24m : On board fixed clock.
+     - ln-usb-clk-12m : On board fixed clock.
+
+  - assigned-clocks : A list of Lochnagar clocks to be reparented, see
+    [2] for available clocks.
+  - assigned-clock-parents : Parents to be assigned to the clocks
+    listed in "assigned-clocks".
+
+Optional nodes:
+
+  - fixed-clock nodes may be registered for the following on board clocks:
+     - ln-pmic-32k : 32768 Hz
+     - ln-clk-12m : 12288000 Hz
+     - ln-clk-11m : 11298600 Hz
+     - ln-clk-24m : 24576000 Hz
+     - ln-clk-22m : 22579200 Hz
+     - ln-clk-8m : 8192000 Hz
+     - ln-usb-clk-24m : 24576000 Hz
+     - ln-usb-clk-12m : 12288000 Hz
+
+Example:
+
+lochnagar {
+	lochnagar-clk {
+		compatible = "cirrus,lochnagar2-clk";
+
+		#clock-cells = <1>;
+
+		clocks = <&clk-audio>, <&clk_pmic>;
+		clock-names = "ln-gf-mclk2", "ln-pmic-32k";
+
+		assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>,
+				  <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>;
+		assigned-clock-parents = <&clk-audio>,
+					 <&clk-pmic>;
+	};
+
+	clk-pmic: clk-pmic {
+		compatible = "fixed-clock";
+		clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+};

Documentation/devicetree/bindings/clock/qoriq-clock.txt

@@ -39,6 +39,7 @@ Required properties:
 	* "fsl,b4860-clockgen"
 	* "fsl,ls1012a-clockgen"
 	* "fsl,ls1021a-clockgen"
+	* "fsl,ls1028a-clockgen"
 	* "fsl,ls1043a-clockgen"
 	* "fsl,ls1046a-clockgen"
 	* "fsl,ls1088a-clockgen"
@@ -83,8 +84,8 @@ second cell is the clock index for the specified type.
 	1	cmux		index (n in CLKCnCSR)
 	2	hwaccel		index (n in CLKCGnHWACSR)
 	3	fman		0 for fm1, 1 for fm2
-	4	platform pll	0=pll, 1=pll/2, 2=pll/3, 3=pll/4
-				4=pll/5, 5=pll/6, 6=pll/7, 7=pll/8
+	4	platform pll	n=pll/(n+1). For example, when n=1,
+				that means output_freq=PLL_freq/2.
 	5	coreclk		must be 0
 
 3. Example

drivers/clk/Kconfig

@@ -219,6 +219,13 @@ config COMMON_CLK_XGENE
 	---help---
 	  Sypport for the APM X-Gene SoC reference, PLL, and device clocks.
 
+config COMMON_CLK_LOCHNAGAR
+	tristate "Cirrus Logic Lochnagar clock driver"
+	depends on MFD_LOCHNAGAR
+	help
+	  This driver supports the clocking features of the Cirrus Logic
+	  Lochnagar audio development board.
+
 config COMMON_CLK_NXP
 	def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
 	select REGMAP_MMIO if ARCH_LPC32XX
@@ -310,6 +317,7 @@ source "drivers/clk/qcom/Kconfig"
 source "drivers/clk/renesas/Kconfig"
 source "drivers/clk/samsung/Kconfig"
 source "drivers/clk/sprd/Kconfig"
+source "drivers/clk/sunxi/Kconfig"
 source "drivers/clk/sunxi-ng/Kconfig"
 source "drivers/clk/tegra/Kconfig"
 source "drivers/clk/ti/Kconfig"

drivers/clk/Makefile

@@ -32,6 +32,7 @@ obj-$(CONFIG_COMMON_CLK_GEMINI)		+= clk-gemini.o
 obj-$(CONFIG_COMMON_CLK_ASPEED)		+= clk-aspeed.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
 obj-$(CONFIG_CLK_HSDK)			+= clk-hsdk-pll.o
+obj-$(CONFIG_COMMON_CLK_LOCHNAGAR)	+= clk-lochnagar.o
 obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
 obj-$(CONFIG_COMMON_CLK_MAX9485)	+= clk-max9485.o
 obj-$(CONFIG_ARCH_MILBEAUT_M10V)	+= clk-milbeaut.o