arm64: dts: clearfog-gt-8k: 1G eth PHY reset signal

This reset signal controls the Marvell 1512 1G PHY. Note that current implementation queries the PHY over the MDIO bus (get_phy_device() call from of_mdiobus_register_phy()) before reset signal deassert. If the PHY reset signal is asserted at boot time, PHY registration fails. So current code relies on the bootloader to deassert the reset signal. Signed-off-by: Baruch Siach <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
jb55 · Nov 30, 2018 · babc554 · babc554
1 parent b597a6f
commit babc554
Showing 1 changed file with 4 additions and 0 deletions.
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -333,6 +333,10 @@
 		 */
 		marvell,reg-init = <3 16 0 0x1017>;
 		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_copper_eth_phy_reset>;
+		reset-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
 	};
 
 	switch0: switch0@4 {