Merge tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - Use match_string() instead of reimplementing it (Andy Shevchenko)

 - Enable SERR# forwarding for all bridges (Bharat Kumar Gogada)

 - Use Latency Tolerance Reporting if already enabled by platform (Bjorn
   Helgaas)

 - Save/restore LTR info for suspend/resume (Bjorn Helgaas)

 - Fix DPC use of uninitialized data (Dongdong Liu)

 - Probe bridge window attributes only once at enumeration-time to fix
   device accesses during rescan (Bjorn Helgaas)

 - Return BAR size (not "size -1 ") from pci_size() to simplify code (Du
   Changbin)

 - Use config header type (not class code) identify bridges more
   reliably (Honghui Zhang)

 - Work around Intel Denverton incorrect Trace Hub BAR size reporting
   (Alexander Shishkin)

 - Reorder pciehp cached state/hardware state updates to avoid missed
   interrupts (Mika Westerberg)

 - Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann)

 - Mark expected switch fall-through (Mathieu Malaterre)

 - Use of_node_name_eq() for node name comparisons (Rob Herring)

 - Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang)

 - Consolidate Rohm Vendor ID definitions (Andy Shevchenko)

 - Use u32 (not __u32) for things not exposed to userspace (Logan
   Gunthorpe)

 - Fix locking semantics of bus and slot reset interfaces (Alex
   Williamson)

 - Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang)

 - Allow portdrv to claim subtractive decode Ports so PCIe services will
   work for them (Honghui Zhang)

 - Report PCIe links that become degraded at run-time (Alexandru
   Gagniuc)

 - Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt
   hotplug (Mika Westerberg)

 - Revert runtime PM suspend/resume callbacks that broke PME on network
   cable plug (Mika Westerberg)

 - Disable Data Link State Changed interrupts to prevent wakeup
   immediately after suspend (Mika Westerberg)

 - Extend altera to support Stratix 10 (Ley Foon Tan)

 - Allow building altera driver on ARM64 (Ley Foon Tan)

 - Replace Douglas with Tom Joseph as Cadence PCI host/endpoint
   maintainer (Lorenzo Pieralisi)

 - Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro)

 - Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I)

 - Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay
   Abraham I)

 - Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I)

 - Simplify dwc (remove unnecessary header includes, name variables
   consistently, reduce inverted logic, etc) (Gustavo Pimentel)

 - Add i.MX8MQ support (Andrey Smirnov)

 - Add message to help debug dwc MSI-X mask bit errors (Gustavo
   Pimentel)

 - Work around imx7d PCIe PLL erratum (Trent Piepho)

 - Don't assert qcom reset GPIO during probe (Bjorn Andersson)

 - Skip dwc MSI init if MSIs have been disabled (Lucas Stach)

 - Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI
   endpoint framework (Wen Yang)

 - Add interface to discover supported endpoint features to replace a
   bitfield that wasn't flexible enough (Kishon Vijay Abraham I)

 - Implement the new supported-feature interface for designware-plat,
   dra7xx, rockchip, cadence (Kishon Vijay Abraham I)

 - Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I)

 - Add layerscape endpoint mode support (Xiaowei Bao)

 - Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya
   Nakamura)

 - Rework hv_irq_unmask() to use cpumask_to_vpset() instead of
   open-coded reimplementation (Maya Nakamura)

 - Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura)

 - Fix mediatek MMIO size computation to enable full size of available
   MMIO space (Honghui Zhang)

 - Fix mediatek DMA window size computation to allow endpoint DMA access
   to full DRAM address range (Honghui Zhang)

 - Fix mvebu prefetchable BAR regression caused by common bridge
   emulation that assumed all bridges had prefetchable windows (Thomas
   Petazzoni)

 - Make advk_pci_bridge_emul_ops static (Wei Yongjun)

 - Configure MPS settings for VMD root ports (Jon Derrick)

* tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits)
  PCI: Update PCIEPORTBUS Kconfig help text
  PCI: Fix "try" semantics of bus and slot reset
  PCI/LINK: Report degraded links via link bandwidth notification
  dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0
  PCI: altera: Enable driver on ARM64
  PCI: altera: Add Stratix 10 PCIe support
  PCI/PME: Fix possible use-after-free on remove
  PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static
  PCI: dwc: skip MSI init if MSIs have been explicitly disabled
  PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
  PCI: hv: Replace hv_vp_set with hv_vpset
  PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt
  PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM
  PCI: mediatek: Fix memory mapped IO range size computation
  PCI: dwc: Remove superfluous shifting in definitions
  PCI: dwc: Make use of GENMASK/FIELD_PREP
  PCI: dwc: Make use of BIT() in constant definitions
  PCI: dwc: Share code for dw_pcie_rd/wr_other_conf()
  PCI: dwc: Make use of IS_ALIGNED()
  PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ
  ...

Documentation/devicetree/bindings/pci/altera-pcie.txt

@@ -1,11 +1,13 @@
 * Altera PCIe controller
 
 Required properties:
-- compatible :	should contain "altr,pcie-root-port-1.0"
+- compatible :	should contain "altr,pcie-root-port-1.0" or "altr,pcie-root-port-2.0"
 - reg:		a list of physical base address and length for TXS and CRA.
+		For "altr,pcie-root-port-2.0", additional HIP base address and length.
 - reg-names:	must include the following entries:
 		"Txs": TX slave port region
 		"Cra": Control register access region
+		"Hip": Hard IP region (if "altr,pcie-root-port-2.0")
 - interrupts:	specifies the interrupt source of the parent interrupt
 		controller.  The format of the interrupt specifier depends
 		on the parent interrupt controller.

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt

@@ -9,6 +9,7 @@ Required properties:
 	- "fsl,imx6sx-pcie",
 	- "fsl,imx6qp-pcie"
 	- "fsl,imx7d-pcie"
+	- "fsl,imx8mq-pcie"
 - reg: base address and length of the PCIe controller
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.
@@ -45,14 +46,19 @@ Additional required properties for imx6sx-pcie:
   PCIE_PHY power domains
 - power-domain-names: Must be "pcie", "pcie_phy"
 
-Additional required properties for imx7d-pcie:
+Additional required properties for imx7d-pcie and imx8mq-pcie:
 - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
 - resets: Must contain phandles to PCIe-related reset lines exposed by SRC
   IP block
 - reset-names: Must contain the following entires:
 	       - "pciephy"
 	       - "apps"
 	       - "turnoff"
+- fsl,imx7d-pcie-phy: A phandle to an fsl,imx7d-pcie-phy node.
+
+Additional required properties for imx8mq-pcie:
+- clock-names: Must include the following additional entries:
+	- "pcie_aux"
 
 Example:
 
@@ -79,3 +85,13 @@ Example:
 		clocks = <&clks 144>, <&clks 206>, <&clks 189>;
 		clock-names = "pcie", "pcie_bus", "pcie_phy";
 	};
+
+* Freescale i.MX7d PCIe PHY
+
+This is the PHY associated with the IMX7d PCIe controller.  It's used by the
+PCI-e controller via the fsl,imx7d-pcie-phy phandle.
+
+Required properties:
+- compatible:
+	- "fsl,imx7d-pcie-phy"
+- reg: base address and length of the PCIe PHY controller

Documentation/devicetree/bindings/pci/layerscape-pci.txt

@@ -13,13 +13,16 @@ information.
 
 Required properties:
 - compatible: should contain the platform identifier such as:
+  RC mode:
         "fsl,ls1021a-pcie"
         "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
         "fsl,ls2088a-pcie"
         "fsl,ls1088a-pcie"
         "fsl,ls1046a-pcie"
         "fsl,ls1043a-pcie"
         "fsl,ls1012a-pcie"
+  EP mode:
+	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
 - reg: base addresses and lengths of the PCIe controller register blocks.
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.

Documentation/devicetree/bindings/pci/rcar-pci.txt

@@ -3,6 +3,7 @@
 Required properties:
 compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
 	    "renesas,pcie-r8a7744" for the R8A7744 SoC;
+	    "renesas,pcie-r8a774c0" for the R8A774C0 SoC;
 	    "renesas,pcie-r8a7779" for the R8A7779 SoC;
 	    "renesas,pcie-r8a7790" for the R8A7790 SoC;
 	    "renesas,pcie-r8a7791" for the R8A7791 SoC;
@@ -13,7 +14,8 @@ compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
 	    "renesas,pcie-r8a77990" for the R8A77990 SoC;
 	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or
 				     RZ/G1 compatible device.
-	    "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device.
+	    "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 or
+				     RZ/G2 compatible device.
 
 	    When compatible with the generic version, nodes must list the
 	    SoC-specific version corresponding to the platform first

Documentation/devicetree/bindings/pci/ti-pci.txt

@@ -1,14 +1,21 @@
 TI PCI Controllers
 
 PCIe DesignWare Controller
- - compatible: Should be "ti,dra7-pcie" for RC
-	       Should be "ti,dra7-pcie-ep" for EP
+ - compatible: Should be "ti,dra7-pcie" for RC (deprecated)
+	       Should be "ti,dra7-pcie-ep" for EP (deprecated)
+	       Should be "ti,dra746-pcie-rc" for dra74x/dra76 in RC mode
+	       Should be "ti,dra746-pcie-ep" for dra74x/dra76 in EP mode
+	       Should be "ti,dra726-pcie-rc" for dra72x in RC mode
+	       Should be "ti,dra726-pcie-ep" for dra72x in EP mode
  - phys : list of PHY specifiers (used by generic PHY framework)
  - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
 	       number of PHYs as specified in *phys* property.
  - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
 	       where <X> is the instance number of the pcie from the HW spec.
  - num-lanes as specified in ../designware-pcie.txt
+ - ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control
+			module and the register offset to specify lane
+			selection.
 
 HOST MODE
 =========

MAINTAINERS

@@ -11830,7 +11830,7 @@ F:	Documentation/devicetree/bindings/pci/pci-armada8k.txt
 F:	drivers/pci/controller/dwc/pcie-armada8k.c
 
 PCI DRIVER FOR CADENCE PCIE IP
-M:	Alan Douglas <adouglas@cadence.com>
+M:	Tom Joseph <tjoseph@cadence.com>
 L:	[email protected]
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/cdns,*.txt

arch/arm/boot/dts/imx7d.dtsi

@@ -96,6 +96,14 @@
 	};
 };
 
+&aips2 {
+	pcie_phy: pcie-phy@306d0000 {
+		  compatible = "fsl,imx7d-pcie-phy";
+		  reg = <0x306d0000 0x10000>;
+		  status = "disabled";
+	};
+};
+
 &aips3 {
 	usbotg2: usb@30b20000 {
 		compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
@@ -173,6 +181,7 @@
 			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
 			 <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
 		reset-names = "pciephy", "apps", "turnoff";
+		fsl,imx7d-pcie-phy = <&pcie_phy>;
 		status = "disabled";
 	};
 };

arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi

@@ -666,6 +666,17 @@
 			status = "disabled";
 		};
 
+		pcie_ep@3400000 {
+			compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+			reg = <0x00 0x03400000 0x0 0x00100000
+				0x40 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			num-lanes = <2>;
+			status = "disabled";
+		};
+
 		pcie@3500000 {
 			compatible = "fsl,ls1046a-pcie";
 			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
@@ -693,6 +704,17 @@
 			status = "disabled";
 		};
 
+		pcie_ep@3500000 {
+			compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+			reg = <0x00 0x03500000 0x0 0x00100000
+				0x48 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			num-lanes = <2>;
+			status = "disabled";
+		};
+
 		pcie@3600000 {
 			compatible = "fsl,ls1046a-pcie";
 			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
@@ -720,6 +742,17 @@
 			status = "disabled";
 		};
 
+		pcie_ep@3600000 {
+			compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03600000 0x0 0x00100000
+				0x50 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			num-lanes = <2>;
+			status = "disabled";
+		};
+
 		qdma: dma-controller@8380000 {
 			compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma";
 			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
@@ -740,7 +773,6 @@
 			queue-sizes = <64 64>;
 			big-endian;
 		};
-
 	};
 
 	reserved-memory {

arch/x86/hyperv/hv_init.c

@@ -96,6 +96,7 @@ void  __percpu **hyperv_pcpu_input_arg;
 EXPORT_SYMBOL_GPL(hyperv_pcpu_input_arg);
 
 u32 hv_max_vp_index;
+EXPORT_SYMBOL_GPL(hv_max_vp_index);
 
 static int hv_cpu_init(unsigned int cpu)
 {

arch/x86/pci/fixup.c

@@ -635,6 +635,22 @@ static void quirk_no_aersid(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
 			      PCI_CLASS_BRIDGE_PCI, 8, quirk_no_aersid);
 
+static void quirk_intel_th_dnv(struct pci_dev *dev)
+{
+	struct resource *r = &dev->resource[4];
+
+	/*
+	 * Denverton reports 2k of RTIT_BAR (intel_th resource 4), which
+	 * appears to be 4 MB in reality.
+	 */
+	if (r->end == r->start + 0x7ff) {
+		r->start = 0;
+		r->end   = 0x3fffff;
+		r->flags |= IORESOURCE_UNSET;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x19e1, quirk_intel_th_dnv);
+
 #ifdef CONFIG_PHYS_ADDR_T_64BIT
 
 #define AMD_141b_MMIO_BASE(x)	(0x80 + (x) * 0x8)

drivers/dma/pch_dma.c

@@ -972,7 +972,6 @@ static void pch_dma_remove(struct pci_dev *pdev)
 }
 
 /* PCI Device ID of DMA device */
-#define PCI_VENDOR_ID_ROHM             0x10DB
 #define PCI_DEVICE_ID_EG20T_PCH_DMA_8CH        0x8810
 #define PCI_DEVICE_ID_EG20T_PCH_DMA_4CH        0x8815
 #define PCI_DEVICE_ID_ML7213_DMA1_8CH	0x8026

drivers/gpio/gpio-ml-ioh.c

@@ -31,8 +31,6 @@
 
 #define IOH_IRQ_BASE		0
 
-#define PCI_VENDOR_ID_ROHM             0x10DB
-
 struct ioh_reg_comn {
 	u32	ien;
 	u32	istatus;

drivers/gpio/gpio-pch.c

@@ -437,7 +437,6 @@ static int __maybe_unused pch_gpio_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(pch_gpio_pm_ops, pch_gpio_suspend, pch_gpio_resume);
 
-#define PCI_VENDOR_ID_ROHM             0x10DB
 static const struct pci_device_id pch_gpio_pcidev_id[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8803) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8014) },

drivers/i2c/busses/i2c-eg20t.c

@@ -177,7 +177,6 @@ static wait_queue_head_t pch_event;
 static DEFINE_MUTEX(pch_mutex);
 
 /* Definition for ML7213 by LAPIS Semiconductor */
-#define PCI_VENDOR_ID_ROHM		0x10DB
 #define PCI_DEVICE_ID_ML7213_I2C	0x802D
 #define PCI_DEVICE_ID_ML7223_I2C	0x8010
 #define PCI_DEVICE_ID_ML7831_I2C	0x8817

drivers/misc/pch_phub.c

@@ -64,7 +64,6 @@
 #define CLKCFG_UARTCLKSEL			(1 << 18)
 
 /* Macros for ML7213 */
-#define PCI_VENDOR_ID_ROHM			0x10db
 #define PCI_DEVICE_ID_ROHM_ML7213_PHUB		0x801A
 
 /* Macros for ML7223 */

drivers/misc/pci_endpoint_test.c

@@ -788,6 +788,7 @@ static void pci_endpoint_test_remove(struct pci_dev *pdev)
 static const struct pci_device_id pci_endpoint_test_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x81c0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, 0xedda) },
 	{ }
 };

drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c

@@ -27,7 +27,6 @@
 #define DRV_VERSION     "1.01"
 const char pch_driver_version[] = DRV_VERSION;
 
-#define PCI_DEVICE_ID_INTEL_IOH1_GBE	0x8802		/* Pci device ID */
 #define PCH_GBE_MAR_ENTRIES		16
 #define PCH_GBE_SHORT_PKT		64
 #define DSC_INIT16			0xC000
@@ -37,11 +36,9 @@ const char pch_driver_version[] = DRV_VERSION;
 #define PCH_GBE_PCI_BAR			1
 #define PCH_GBE_RESERVE_MEMORY		0x200000	/* 2MB */
 
-/* Macros for ML7223 */
-#define PCI_VENDOR_ID_ROHM			0x10db
-#define PCI_DEVICE_ID_ROHM_ML7223_GBE		0x8013
+#define PCI_DEVICE_ID_INTEL_IOH1_GBE		0x8802
 
-/* Macros for ML7831 */
+#define PCI_DEVICE_ID_ROHM_ML7223_GBE		0x8013
 #define PCI_DEVICE_ID_ROHM_ML7831_GBE		0x8802
 
 #define PCH_GBE_TX_WEIGHT         64

drivers/pci/controller/Kconfig

@@ -175,7 +175,7 @@ config PCIE_IPROC_MSI
 
 config PCIE_ALTERA
 	bool "Altera PCIe controller"
-	depends on ARM || NIOS2 || COMPILE_TEST
+	depends on ARM || NIOS2 || ARM64 || COMPILE_TEST
 	help
 	  Say Y here if you want to enable PCIe controller support on Altera
 	  FPGA.

drivers/pci/controller/dwc/Kconfig

@@ -89,8 +89,8 @@ config PCI_EXYNOS
 	select PCIE_DW_HOST
 
 config PCI_IMX6
-	bool "Freescale i.MX6/7 PCIe controller"
-	depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST)
+	bool "Freescale i.MX6/7/8 PCIe controller"
+	depends on SOC_IMX6Q || SOC_IMX7D || (ARM64 && ARCH_MXC) || COMPILE_TEST
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIE_DW_HOST
 

drivers/pci/controller/dwc/Makefile

@@ -8,7 +8,7 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
 obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
 obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
 obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
-obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
+obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
 obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
 obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o