docs: fix references for DMA*.txt files

As we moved those files to core-api, fix references to point
to their newer locations.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/37b2fd159fbc7655dbf33b3eb1215396a25f6344.1592895969.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <[email protected]>

Documentation/PCI/pci.rst

@@ -265,7 +265,7 @@ Set the DMA mask size
 ---------------------
 .. note::
    If anything below doesn't make sense, please refer to
-   Documentation/DMA-API.txt. This section is just a reminder that
+   :doc:`/core-api/dma-api`. This section is just a reminder that
    drivers need to indicate DMA capabilities of the device and is not
    an authoritative source for DMA interfaces.
 
@@ -291,7 +291,7 @@ Many 64-bit "PCI" devices (before PCI-X) and some PCI-X devices are
 Setup shared control data
 -------------------------
 Once the DMA masks are set, the driver can allocate "consistent" (a.k.a. shared)
-memory.  See Documentation/DMA-API.txt for a full description of
+memory.  See :doc:`/core-api/dma-api` for a full description of
 the DMA APIs. This section is just a reminder that it needs to be done
 before enabling DMA on the device.
 
@@ -421,7 +421,7 @@ owners if there is one.
 
 Then clean up "consistent" buffers which contain the control data.
 
-See Documentation/DMA-API.txt for details on unmapping interfaces.
+See :doc:`/core-api/dma-api` for details on unmapping interfaces.
 
 
 Unregister from other subsystems

Documentation/block/biodoc.rst

@@ -196,7 +196,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address
 do not have a corresponding kernel virtual address space mapping) and
 low-memory pages.
 
-Note: Please refer to Documentation/DMA-API-HOWTO.txt for a discussion
+Note: Please refer to :doc:`/core-api/dma-api-howto` for a discussion
 on PCI high mem DMA aspects and mapping of scatter gather lists, and support
 for 64 bit PCI.
 

Documentation/bus-virt-phys-mapping.txt

@@ -8,7 +8,7 @@ How to access I/O mapped memory from within device drivers
 
 	The virt_to_bus() and bus_to_virt() functions have been
 	superseded by the functionality provided by the PCI DMA interface
-	(see Documentation/DMA-API-HOWTO.txt).  They continue
+	(see :doc:`/core-api/dma-api-howto`).  They continue
 	to be documented below for historical purposes, but new code
 	must not use them. --davidm 00/12/12
 

Documentation/core-api/dma-api.rst

@@ -5,7 +5,7 @@ Dynamic DMA mapping using the generic device
 :Author: James E.J. Bottomley <[email protected]>
 
 This document describes the DMA API.  For a more gentle introduction
-of the API (and actual examples), see Documentation/DMA-API-HOWTO.txt.
+of the API (and actual examples), see :doc:`/core-api/dma-api-howto`.
 
 This API is split into two pieces.  Part I describes the basic API.
 Part II describes extensions for supporting non-consistent memory
@@ -471,7 +471,7 @@ without the _attrs suffixes, except that they pass an optional
 dma_attrs.
 
 The interpretation of DMA attributes is architecture-specific, and
-each attribute should be documented in Documentation/DMA-attributes.txt.
+each attribute should be documented in :doc:`/core-api/dma-attributes`.
 
 If dma_attrs are 0, the semantics of each of these functions
 is identical to those of the corresponding function
@@ -484,7 +484,7 @@ for DMA::
 
 	#include <linux/dma-mapping.h>
 	/* DMA_ATTR_FOO should be defined in linux/dma-mapping.h and
-	* documented in Documentation/DMA-attributes.txt */
+	* documented in Documentation/core-api/dma-attributes.rst */
 	...
 
 		unsigned long attr;

Documentation/core-api/dma-isa-lpc.rst

@@ -17,7 +17,7 @@ To do ISA style DMA you need to include two headers::
 	#include <asm/dma.h>
 
 The first is the generic DMA API used to convert virtual addresses to
-bus addresses (see Documentation/DMA-API.txt for details).
+bus addresses (see :doc:`/core-api/dma-api` for details).
 
 The second contains the routines specific to ISA DMA transfers. Since
 this is not present on all platforms make sure you construct your

Documentation/driver-api/usb/dma.rst

@@ -10,7 +10,7 @@ API overview
 
 The big picture is that USB drivers can continue to ignore most DMA issues,
 though they still must provide DMA-ready buffers (see
-``Documentation/DMA-API-HOWTO.txt``).  That's how they've worked through
+:doc:`/core-api/dma-api-howto`).  That's how they've worked through
 the 2.4 (and earlier) kernels, or they can now be DMA-aware.
 
 DMA-aware usb drivers:
@@ -60,7 +60,7 @@ and effects like cache-trashing can impose subtle penalties.
   force a consistent memory access ordering by using memory barriers.  It's
   not using a streaming DMA mapping, so it's good for small transfers on
   systems where the I/O would otherwise thrash an IOMMU mapping.  (See
-  ``Documentation/DMA-API-HOWTO.txt`` for definitions of "coherent" and
+  :doc:`/core-api/dma-api-howto` for definitions of "coherent" and
   "streaming" DMA mappings.)
 
   Asking for 1/Nth of a page (as well as asking for N pages) is reasonably
@@ -91,7 +91,7 @@ Working with existing buffers
 Existing buffers aren't usable for DMA without first being mapped into the
 DMA address space of the device.  However, most buffers passed to your
 driver can safely be used with such DMA mapping.  (See the first section
-of Documentation/DMA-API-HOWTO.txt, titled "What memory is DMA-able?")
+of :doc:`/core-api/dma-api-howto`, titled "What memory is DMA-able?")
 
 - When you're using scatterlists, you can map everything at once.  On some
   systems, this kicks in an IOMMU and turns the scatterlists into single

Documentation/translations/ko_KR/memory-barriers.txt

@@ -570,8 +570,8 @@ ACQUIRE 는 해당 오퍼레이션의 로드 부분에만 적용되고 RELEASE 
 	[*] 버스 마스터링 DMA 와 일관성에 대해서는 다음을 참고하시기 바랍니다:
 
 	    Documentation/driver-api/pci/pci.rst
-	    Documentation/DMA-API-HOWTO.txt
-	    Documentation/DMA-API.txt
+	    Documentation/core-api/dma-api-howto.rst
+	    Documentation/core-api/dma-api.rst
 
 
 데이터 의존성 배리어 (역사적)
@@ -1907,7 +1907,7 @@ Mandatory 배리어들은 SMP 시스템에서도 UP 시스템에서도 SMP 효
 
      writel_relaxed() 와 같은 완화된 I/O 접근자들에 대한 자세한 내용을 위해서는
      "커널 I/O 배리어의 효과" 섹션을, consistent memory 에 대한 자세한 내용을
-     위해선 Documentation/DMA-API.txt 문서를 참고하세요.
+     위해선 Documentation/core-api/dma-api.rst 문서를 참고하세요.
 
 
 =========================

arch/ia64/hp/common/sba_iommu.c

@@ -907,7 +907,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
  * @dir: dma direction
  * @attrs: optional dma attributes
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static dma_addr_t sba_map_page(struct device *dev, struct page *page,
 			       unsigned long poff, size_t size,
@@ -1028,7 +1028,7 @@ sba_mark_clean(struct ioc *ioc, dma_addr_t iova, size_t size)
  * @dir:  R/W or both.
  * @attrs: optional dma attributes
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
 			   enum dma_data_direction dir, unsigned long attrs)
@@ -1105,7 +1105,7 @@ static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
  * @size:  number of bytes mapped in driver buffer.
  * @dma_handle:  IOVA of new buffer.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void *
 sba_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
@@ -1162,7 +1162,7 @@ sba_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
  * @vaddr:  virtual address IOVA of "consistent" buffer.
  * @dma_handler:  IO virtual address of "consistent" buffer.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void sba_free_coherent(struct device *dev, size_t size, void *vaddr,
 			      dma_addr_t dma_handle, unsigned long attrs)
@@ -1425,7 +1425,7 @@ static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist,
  * @dir:  R/W or both.
  * @attrs: optional dma attributes
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist,
 			    int nents, enum dma_data_direction dir,
@@ -1524,7 +1524,7 @@ static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist,
  * @dir:  R/W or both.
  * @attrs: optional dma attributes
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist,
 			       int nents, enum dma_data_direction dir,

arch/parisc/kernel/pci-dma.c

@@ -3,7 +3,7 @@
 ** PARISC 1.1 Dynamic DMA mapping support.
 ** This implementation is for PA-RISC platforms that do not support
 ** I/O TLBs (aka DMA address translation hardware).
-** See Documentation/DMA-API-HOWTO.txt for interface definitions.
+** See Documentation/core-api/dma-api-howto.rst for interface definitions.
 **
 **      (c) Copyright 1999,2000 Hewlett-Packard Company
 **      (c) Copyright 2000 Grant Grundler

arch/x86/include/asm/dma-mapping.h

@@ -3,8 +3,8 @@
 #define _ASM_X86_DMA_MAPPING_H
 
 /*
- * IOMMU interface. See Documentation/DMA-API-HOWTO.txt and
- * Documentation/DMA-API.txt for documentation.
+ * IOMMU interface. See Documentation/core-api/dma-api-howto.rst and
+ * Documentation/core-api/dma-api.rst for documentation.
  */
 
 #include <linux/scatterlist.h>

arch/x86/kernel/amd_gart_64.c

@@ -6,7 +6,7 @@
  * This allows to use PCI devices that only support 32bit addresses on systems
  * with more than 4GB.
  *
- * See Documentation/DMA-API-HOWTO.txt for the interface specification.
+ * See Documentation/core-api/dma-api-howto.rst for the interface specification.
  *
  * Copyright 2002 Andi Kleen, SuSE Labs.
  */

drivers/parisc/sba_iommu.c

@@ -666,7 +666,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
  * @dev: instance of PCI owned by the driver that's asking
  * @mask:  number of address bits this PCI device can handle
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static int sba_dma_supported( struct device *dev, u64 mask)
 {
@@ -698,7 +698,7 @@ static int sba_dma_supported( struct device *dev, u64 mask)
  * @size:  number of bytes to map in driver buffer.
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static dma_addr_t
 sba_map_single(struct device *dev, void *addr, size_t size,
@@ -788,7 +788,7 @@ sba_map_page(struct device *dev, struct page *page, unsigned long offset,
  * @size:  number of bytes mapped in driver buffer.
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void
 sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
@@ -867,7 +867,7 @@ sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
  * @size:  number of bytes mapped in driver buffer.
  * @dma_handle:  IOVA of new buffer.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void *sba_alloc(struct device *hwdev, size_t size, dma_addr_t *dma_handle,
 		gfp_t gfp, unsigned long attrs)
@@ -898,7 +898,7 @@ static void *sba_alloc(struct device *hwdev, size_t size, dma_addr_t *dma_handle
  * @vaddr:  virtual address IOVA of "consistent" buffer.
  * @dma_handler:  IO virtual address of "consistent" buffer.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void
 sba_free(struct device *hwdev, size_t size, void *vaddr,
@@ -933,7 +933,7 @@ int dump_run_sg = 0;
  * @nents:  number of entries in list
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static int
 sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
@@ -1017,7 +1017,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
  * @nents:  number of entries in list
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void 
 sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,

include/linux/dma-mapping.h

@@ -14,7 +14,7 @@
 
 /**
  * List of possible attributes associated with a DMA mapping. The semantics
- * of each attribute should be defined in Documentation/DMA-attributes.txt.
+ * of each attribute should be defined in Documentation/core-api/dma-attributes.rst.
  */
 
 /*

include/media/videobuf-dma-sg.h

@@ -31,7 +31,7 @@
  *	does memory allocation too using vmalloc_32().
  *
  * videobuf_dma_*()
- *	see Documentation/DMA-API-HOWTO.txt, these functions to
+ *	see Documentation/core-api/dma-api-howto.rst, these functions to
  *	basically the same.  The map function does also build a
  *	scatterlist for the buffer (and unmap frees it ...)
  *

kernel/dma/debug.c

@@ -1071,7 +1071,7 @@ static void check_unmap(struct dma_debug_entry *ref)
 	/*
 	 * Drivers should use dma_mapping_error() to check the returned
 	 * addresses of dma_map_single() and dma_map_page().
-	 * If not, print this warning message. See Documentation/DMA-API.txt.
+	 * If not, print this warning message. See Documentation/core-api/dma-api.rst.
 	 */
 	if (entry->map_err_type == MAP_ERR_NOT_CHECKED) {
 		err_printk(ref->dev, entry,