Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "The main set of series of patches for media subsystem, including:
   - document RC sysfs class
   - added an API to setup scancode to allow waking up systems using the
     Remote Controller
   - add API for SDR devices.  Drivers are still on staging
   - some API improvements for getting EDID data from media
     inputs/outputs
   - new DVB frontend driver for drx-j (ATSC)
   - one driver (it913x/it9137) got removed, in favor of an improvement
     on another driver (af9035)
   - added a skeleton V4L2 PCI driver at documentation
   - added a dual flash driver (lm3646)
   - added a new IR driver (img-ir)
   - added an IR scancode decoder for the Sharp protocol
   - some improvements at the usbtv driver, to allow its core to be
     reused.
   - added a new SDR driver (rtl2832u_sdr)
   - added a new tuner driver (msi001)
   - several improvements at em28xx driver to fix PM support, device
     removal and to split the V4L2 specific bits into a separate
     sub-driver
   - one driver got converted to videobuf2 (s2255drv)
   - the e4000 tuner driver now follows an improved binding model
   - some fixes at V4L2 compat32 code
   - several fixes and enhancements at videobuf2 code
   - some cleanups at V4L2 API documentation
   - usual driver enhancements, new board additions and misc fixups"

[ NOTE! This merge effective drops commit 4329b93 ("of: Reduce
  indentation in of_graph_get_next_endpoint").

  The of_graph_get_next_endpoint() function was moved and renamed by
  commit fd9fdb7 ("[media] of: move graph helpers from
  drivers/media/v4l2-core to drivers/of").  It was originally called
  v4l2_of_get_next_endpoint() and lived in the file
  drivers/media/v4l2-core/v4l2-of.c.

  In that original location, it was then fixed to support empty port
  nodes by commit b9db140 ("[media] v4l: of: Support empty port
  nodes"), and that commit clashes badly with the dropped "Reduce
  intendation" commit.  I had to choose one or the other, and decided
  that the "Support empty port nodes" commit was more important ]

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (426 commits)
  [media] em28xx-dvb: fix PCTV 461e tuner I2C binding
  Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding"
  [media] em28xx: fix PCTV 290e LNA oops
  [media] em28xx-dvb: fix PCTV 461e tuner I2C binding
  [media] m88ds3103: fix bug on .set_tone()
  [media] saa7134: fix WARN_ON during resume
  [media] v4l2-dv-timings: add module name, description, license
  [media] videodev2.h: add parenthesis around macro arguments
  [media] saa6752hs: depends on CRC32
  [media] si4713: fix Kconfig dependencies
  [media] Sensoray 2255 uses videobuf2
  [media] adv7180: free an interrupt on failure paths in init_device()
  [media] e4000: make VIDEO_V4L2 dependency optional
  [media] af9033: Don't export functions for the hardware filter
  [media] af9035: use af9033 PID filters
  [media] af9033: implement PID filter
  [media] rtl2832_sdr: do not use dynamic stack allocation
  [media] e4000: fix 32-bit build error
  [media] em28xx-audio: make sure audio is unmuted on open()
  [media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format
  ...

CREDITS

@@ -630,6 +630,13 @@ N: Michael Elizabeth Chastain
 E: [email protected]
 D: Configure, Menuconfig, xconfig
 
+N: Mauro Carvalho Chehab
+E: [email protected]
+E: [email protected]
+D: Media subsystem (V4L/DVB) drivers and core
+D: EDAC drivers and EDAC 3.0 core rework
+S: Brazil
+
 N: Raymond Chen
 E: [email protected]
 D: Author of Configure script

Documentation/ABI/testing/sysfs-class-rc

@@ -0,0 +1,111 @@
+What:		/sys/class/rc/
+Date:		Apr 2010
+KernelVersion:	2.6.35
+Contact:	Mauro Carvalho Chehab <[email protected]>
+Description:
+		The rc/ class sub-directory belongs to the Remote Controller
+		core and provides a sysfs interface for configuring infrared
+		remote controller receivers.
+
+What:		/sys/class/rc/rcN/
+Date:		Apr 2010
+KernelVersion:	2.6.35
+Contact:	Mauro Carvalho Chehab <[email protected]>
+Description:
+		A /sys/class/rc/rcN directory is created for each remote
+		control receiver device where N is the number of the receiver.
+
+What:		/sys/class/rc/rcN/protocols
+Date:		Jun 2010
+KernelVersion:	2.6.36
+Contact:	Mauro Carvalho Chehab <[email protected]>
+Description:
+		Reading this file returns a list of available protocols,
+		something like:
+		    "rc5 [rc6] nec jvc [sony]"
+		Enabled protocols are shown in [] brackets.
+		Writing "+proto" will add a protocol to the list of enabled
+		protocols.
+		Writing "-proto" will remove a protocol from the list of enabled
+		protocols.
+		Writing "proto" will enable only "proto".
+		Writing "none" will disable all protocols.
+		Write fails with EINVAL if an invalid protocol combination or
+		unknown protocol name is used.
+
+What:		/sys/class/rc/rcN/filter
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <[email protected]>
+Description:
+		Sets the scancode filter expected value.
+		Use in combination with /sys/class/rc/rcN/filter_mask to set the
+		expected value of the bits set in the filter mask.
+		If the hardware supports it then scancodes which do not match
+		the filter will be ignored. Otherwise the write will fail with
+		an error.
+		This value may be reset to 0 if the current protocol is altered.
+
+What:		/sys/class/rc/rcN/filter_mask
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <[email protected]>
+Description:
+		Sets the scancode filter mask of bits to compare.
+		Use in combination with /sys/class/rc/rcN/filter to set the bits
+		of the scancode which should be compared against the expected
+		value. A value of 0 disables the filter to allow all valid
+		scancodes to be processed.
+		If the hardware supports it then scancodes which do not match
+		the filter will be ignored. Otherwise the write will fail with
+		an error.
+		This value may be reset to 0 if the current protocol is altered.
+
+What:		/sys/class/rc/rcN/wakeup_protocols
+Date:		Feb 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <[email protected]>
+Description:
+		Reading this file returns a list of available protocols to use
+		for the wakeup filter, something like:
+		    "rc5 rc6 nec jvc [sony]"
+		The enabled wakeup protocol is shown in [] brackets.
+		Writing "+proto" will add a protocol to the list of enabled
+		wakeup protocols.
+		Writing "-proto" will remove a protocol from the list of enabled
+		wakeup protocols.
+		Writing "proto" will use "proto" for wakeup events.
+		Writing "none" will disable wakeup.
+		Write fails with EINVAL if an invalid protocol combination or
+		unknown protocol name is used, or if wakeup is not supported by
+		the hardware.
+
+What:		/sys/class/rc/rcN/wakeup_filter
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <[email protected]>
+Description:
+		Sets the scancode wakeup filter expected value.
+		Use in combination with /sys/class/rc/rcN/wakeup_filter_mask to
+		set the expected value of the bits set in the wakeup filter mask
+		to trigger a system wake event.
+		If the hardware supports it and wakeup_filter_mask is not 0 then
+		scancodes which match the filter will wake the system from e.g.
+		suspend to RAM or power off.
+		Otherwise the write will fail with an error.
+		This value may be reset to 0 if the wakeup protocol is altered.
+
+What:		/sys/class/rc/rcN/wakeup_filter_mask
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <[email protected]>
+Description:
+		Sets the scancode wakeup filter mask of bits to compare.
+		Use in combination with /sys/class/rc/rcN/wakeup_filter to set
+		the bits of the scancode which should be compared against the
+		expected value to trigger a system wake event.
+		If the hardware supports it and wakeup_filter_mask is not 0 then
+		scancodes which match the filter will wake the system from e.g.
+		suspend to RAM or power off.
+		Otherwise the write will fail with an error.
+		This value may be reset to 0 if the wakeup protocol is altered.

Documentation/DocBook/media/dvb/demux.xml

@@ -1042,7 +1042,14 @@ role="subsection"><title>DMX_ADD_PID</title>
 </para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
-<para>This ioctl is undocumented. Documentation is welcome.</para>
+<para>This ioctl call allows to add multiple PIDs to a transport stream filter
+previously set up with DMX_SET_PES_FILTER and output equal to DMX_OUT_TSDEMUX_TAP.
+</para></entry></row><row><entry align="char"><para>
+It is used by readers of /dev/dvb/adapterX/demuxY.
+</para></entry></row><row><entry align="char"><para>
+It may be called at any time, i.e. before or after the first filter on the
+shared file descriptor was started. It makes it possible to record multiple
+services without the need to de-multiplex or re-multiplex TS packets.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
 <para>SYNOPSIS
@@ -1075,7 +1082,7 @@ role="subsection"><title>DMX_ADD_PID</title>
 </para>
 </entry><entry
  align="char">
-<para>Undocumented.</para>
+<para>PID number to be filtered.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
 &return-value-dvb;
@@ -1087,7 +1094,15 @@ role="subsection"><title>DMX_REMOVE_PID</title>
 </para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
-<para>This ioctl is undocumented. Documentation is welcome.</para>
+<para>This ioctl call allows to remove a PID when multiple PIDs are set on a
+transport stream filter, e. g. a filter previously set up with output equal to
+DMX_OUT_TSDEMUX_TAP, created via either DMX_SET_PES_FILTER or DMX_ADD_PID.
+</para></entry></row><row><entry align="char"><para>
+It is used by readers of /dev/dvb/adapterX/demuxY.
+</para></entry></row><row><entry align="char"><para>
+It may be called at any time, i.e. before or after the first filter on the
+shared file descriptor was started. It makes it possible to record multiple
+services without the need to de-multiplex or re-multiplex TS packets.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
 <para>SYNOPSIS
@@ -1120,7 +1135,7 @@ role="subsection"><title>DMX_REMOVE_PID</title>
 </para>
 </entry><entry
  align="char">
-<para>Undocumented.</para>
+<para>PID of the PES filter to be removed.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
 &return-value-dvb;

Documentation/DocBook/media/dvb/dvbapi.xml

@@ -18,7 +18,7 @@
 <firstname>Mauro</firstname>
 <othername role="mi">Carvalho</othername>
 <surname>Chehab</surname>
-<affiliation><address><email>mchehab@redhat.com</email></address></affiliation>
+<affiliation><address><email>m.chehab@samsung.com</email></address></affiliation>
 <contrib>Ported document to Docbook XML.</contrib>
 </author>
 </authorgroup>
@@ -28,7 +28,7 @@
 	<holder>Convergence GmbH</holder>
 </copyright>
 <copyright>
-	<year>2009-2012</year>
+	<year>2009-2014</year>
 	<holder>Mauro Carvalho Chehab</holder>
 </copyright>
 

Documentation/DocBook/media/dvb/frontend.xml

@@ -744,7 +744,7 @@ typedef enum fe_hierarchy {
 </para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
-<para>int ioctl(int fd, int request = <link linkend="FE_READ_SNR">FE_READ_SNR</link>, int16_t
+<para>int ioctl(int fd, int request = <link linkend="FE_READ_SNR">FE_READ_SNR</link>, uint16_t
  &#x22C6;snr);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
@@ -766,7 +766,7 @@ typedef enum fe_hierarchy {
 </entry>
  </row><row><entry
  align="char">
-<para>int16_t *snr</para>
+<para>uint16_t *snr</para>
 </entry><entry
  align="char">
 <para>The signal-to-noise ratio is stored into *snr.</para>
@@ -791,7 +791,7 @@ typedef enum fe_hierarchy {
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
 <para>int ioctl( int fd, int request =
- <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link>, int16_t &#x22C6;strength);</para>
+ <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link>, uint16_t &#x22C6;strength);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
 
@@ -814,7 +814,7 @@ typedef enum fe_hierarchy {
 </entry>
  </row><row><entry
  align="char">
-<para>int16_t *strength</para>
+<para>uint16_t *strength</para>
 </entry><entry
  align="char">
 <para>The signal strength value is stored into *strength.</para>