Merge tag 'hwmon-for-linus-v4.12' of git://git.kernel.org/pub/scm/lin…

…ux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - removed twl4030-madc driver - added ASPEED PWM/fan driver - various minor improvements and fixes in several drivers * tag 'hwmon-for-linus-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (36 commits) hwmon: (twl4030-madc) drop driver hwmon: (tmp103) Use SIMPLE_DEV_PM_OPS helper macro hwmon: (adt7475) set start bit in probe hwmon: (ina209) Handled signed registers hwmon: (lm87) Add OF device ID table hwmon: (lm87) Remove unused I2C devices driver_data drivers: hwmon: Support for ASPEED PWM/Fan tach Documentation: dt-bindings: Document bindings for ASPEED AST2400/AST2500 PWM and Fan tach controller device driver hwmon: (lm87) Allow channel data to be set from dts file Documentation: dtb: lm87: Add hwmon binding documentation hwmon: (ads7828) Accept optional parameters from device tree hwmon: (dell-smm) Add Dell XPS 15 9560 into DMI list hwmon: Constify str parameter of hwmon_ops->read_string dt: Add vendor prefix for Sensirion hwmon: (tmp421) Add OF device ID table hwmon: (tmp103) Add OF device ID table hwmon: (tmp102) Add OF device ID table hwmon: (stts751) Add OF device ID table hwmon: (ucd9200) Add OF device ID table hwmon: (ucd9000) Add OF device ID table ...
jimmycarry · May 1, 2017 · cdbfbba · cdbfbba
2 parents 89d1cf8 + 09d9d82
commit cdbfbba
Show file tree

Hide file tree

Showing 35 changed files with 1,693 additions and 178 deletions.
diff --git a/Documentation/devicetree/bindings/hwmon/ads7828.txt b/Documentation/devicetree/bindings/hwmon/ads7828.txt
@@ -0,0 +1,25 @@
+ads7828 properties
+
+Required properties:
+- compatible: Should be one of
+	       ti,ads7828
+	       ti,ads7830
+- reg: I2C address
+
+Optional properties:
+
+- ti,differential-input
+  Set to use the device in differential mode.
+- vref-supply
+  The external reference on the device is set to this regulators output. If it
+  does not exists the internal reference will be used and output by the ads78xx
+  on the "external vref" pin.
+
+  Example ADS7828 node:
+
+  ads7828: ads@48 {
+	   comatible = "ti,ads7828";
+	   reg = <0x48>;
+	   vref-supply = <&vref>;
+	   ti,differential-input;
+  };
diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
@@ -0,0 +1,68 @@
+ASPEED AST2400/AST2500 PWM and Fan Tacho controller device driver
+
+The ASPEED PWM controller can support upto 8 PWM outputs. The ASPEED Fan Tacho
+controller can support upto 16 Fan tachometer inputs.
+
+There can be upto 8 fans supported. Each fan can have one PWM output and
+one/two Fan tach inputs.
+
+Required properties for pwm-tacho node:
+- #address-cells : should be 1.
+
+- #size-cells : should be 1.
+
+- reg : address and length of the register set for the device.
+
+- pinctrl-names : a pinctrl state named "default" must be defined.
+
+- pinctrl-0 : phandle referencing pin configuration of the PWM ports.
+
+- compatible : should be "aspeed,ast2400-pwm-tacho" for AST2400 and
+	       "aspeed,ast2500-pwm-tacho" for AST2500.
+
+- clocks : a fixed clock providing input clock frequency(PWM
+	   and Fan Tach clock)
+
+fan subnode format:
+===================
+Under fan subnode there can upto 8 child nodes, with each child node
+representing a fan. If there are 8 fans each fan can have one PWM port and
+one/two Fan tach inputs.
+
+Required properties for each child node:
+- reg : should specify PWM source port.
+	integer value in the range 0 to 7 with 0 indicating PWM port A and
+	7 indicating PWM port H.
+
+- aspeed,fan-tach-ch : should specify the Fan tach input channel.
+                integer value in the range 0 through 15, with 0 indicating
+		Fan tach channel 0 and 15 indicating Fan tach channel 15.
+		Atleast one Fan tach input channel is required.
+
+Examples:
+
+pwm_tacho_fixed_clk: fixedclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <24000000>;
+};
+
+pwm_tacho: pwmtachocontroller@1e786000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg = <0x1E786000 0x1000>;
+	compatible = "aspeed,ast2500-pwm-tacho";
+	clocks = <&pwm_tacho_fixed_clk>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x02>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt
@@ -0,0 +1,30 @@
+*LM87 hwmon sensor.
+
+Required properties:
+- compatible: Should be
+	"ti,lm87"
+
+- reg: I2C address
+
+optional properties:
+- has-temp3: This configures pins 18 and 19 to be used as a second
+             remote temperature sensing channel. By default the pins
+             are configured as voltage input pins in0 and in5.
+
+- has-in6: When set, pin 5 is configured to be used as voltage input
+           in6. Otherwise the pin is set as FAN1 input.
+
+- has-in7: When set, pin 6 is configured to be used as voltage input
+           in7. Otherwise the pin is set as FAN2 input.
+
+- vcc-supply: a Phandle for the regulator supplying power, can be
+              cofigured to measure 5.0V power supply. Default is 3.3V.
+
+Example:
+
+lm87@2e {
+	compatible = "ti,lm87";
+	reg = <0x2e>;
+	has-temp3;
+	vcc-supply = <&reg_5v0>;
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -265,6 +265,7 @@ sbs	Smart Battery System
 schindler	Schindler
 seagate	Seagate Technology PLC
 semtech	Semtech Corporation
+sensirion	Sensirion AG
 sgx	SGX Sensortech
 sharp	Sharp Corporation
 si-en	Si-En Technology Ltd.

diff --git a/Documentation/hwmon/aspeed-pwm-tacho b/Documentation/hwmon/aspeed-pwm-tacho
@@ -0,0 +1,22 @@
+Kernel driver aspeed-pwm-tacho
+==============================
+
+Supported chips:
+	ASPEED AST2400/2500
+
+Authors:
+	<[email protected]>
+
+Description:
+------------
+This driver implements support for ASPEED AST2400/2500 PWM and Fan Tacho
+controller. The PWM controller supports upto 8 PWM outputs. The Fan tacho
+controller supports up to 16 tachometer inputs.
+
+The driver provides the following sensor accesses in sysfs:
+
+fanX_input	ro	provide current fan rotation value in RPM as reported
+			by the fan to the device.
+
+pwmX		rw	get or set PWM fan control value. This is an integer
+			value between 0(off) and 255(full speed).
diff --git a/Documentation/hwmon/tc654 b/Documentation/hwmon/tc654
@@ -2,7 +2,7 @@ Kernel driver tc654
 ===================
 
 Supported chips:
-  * Microship TC654 and TC655
+  * Microchip TC654 and TC655
     Prefix: 'tc654'
     Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/20001734C.pdf
 

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
@@ -341,6 +341,15 @@ config SENSORS_ASB100
 	  This driver can also be built as a module.  If so, the module
 	  will be called asb100.
 
+config SENSORS_ASPEED
+	tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver"
+	help
+	  This driver provides support for ASPEED AST2400/AST2500 PWM
+	  and Fan Tacho controllers.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called aspeed_pwm_tacho.
+
 config SENSORS_ATXP1
 	tristate "Attansic ATXP1 VID controller"
 	depends on I2C
@@ -1643,16 +1652,6 @@ config SENSORS_TMP421
 	  This driver can also be built as a module.  If so, the module
 	  will be called tmp421.
 
-config SENSORS_TWL4030_MADC
-	tristate "Texas Instruments TWL4030 MADC Hwmon"
-	depends on TWL4030_MADC
-	help
-	If you say yes here you get hwmon support for triton
-	TWL4030-MADC.
-
-	This driver can also be built as a module. If so it will be called
-	twl4030-madc-hwmon.
-
 config SENSORS_VEXPRESS
 	tristate "Versatile Express"
 	depends on VEXPRESS_CONFIG

diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_SENSORS_ADT7475)	+= adt7475.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
 obj-$(CONFIG_SENSORS_ARM_SCPI)	+= scpi-hwmon.o
 obj-$(CONFIG_SENSORS_ASC7621)	+= asc7621.o
+obj-$(CONFIG_SENSORS_ASPEED)	+= aspeed-pwm-tacho.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
@@ -157,7 +158,6 @@ obj-$(CONFIG_SENSORS_TMP103)	+= tmp103.o
 obj-$(CONFIG_SENSORS_TMP108)	+= tmp108.o
 obj-$(CONFIG_SENSORS_TMP401)	+= tmp401.o
 obj-$(CONFIG_SENSORS_TMP421)	+= tmp421.o
-obj-$(CONFIG_SENSORS_TWL4030_MADC)+= twl4030-madc-hwmon.o
 obj-$(CONFIG_SENSORS_VEXPRESS)	+= vexpress-hwmon.o
 obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o
 obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o

diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
@@ -217,9 +217,16 @@ static const struct i2c_device_id ad7414_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ad7414_id);
 
+static const struct of_device_id ad7414_of_match[] = {
+	{ .compatible = "ad,ad7414" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ad7414_of_match);
+
 static struct i2c_driver ad7414_driver = {
 	.driver = {
 		.name	= "ad7414",
+		.of_match_table = of_match_ptr(ad7414_of_match),
 	},
 	.probe	= ad7414_probe,
 	.id_table = ad7414_id,

diff --git a/drivers/hwmon/adc128d818.c b/drivers/hwmon/adc128d818.c
@@ -546,10 +546,17 @@ static const struct i2c_device_id adc128_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, adc128_id);
 
+static const struct of_device_id adc128_of_match[] = {
+	{ .compatible = "ti,adc128d818" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, adc128_of_match);
+
 static struct i2c_driver adc128_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "adc128d818",
+		.of_match_table = of_match_ptr(adc128_of_match),
 	},
 	.probe		= adc128_probe,
 	.remove		= adc128_remove,

diff --git a/drivers/hwmon/ads1015.c b/drivers/hwmon/ads1015.c
@@ -31,6 +31,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <linux/of_device.h>
 #include <linux/of.h>
 
 #include <linux/i2c/ads1015.h>
@@ -268,7 +269,12 @@ static int ads1015_probe(struct i2c_client *client,
 			    GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
-	data->id = id->driver_data;
+
+	if (client->dev.of_node)
+		data->id = (enum ads1015_chips)
+			of_device_get_match_data(&client->dev);
+	else
+		data->id = id->driver_data;
 	i2c_set_clientdata(client, data);
 	mutex_init(&data->update_lock);
 
@@ -303,9 +309,23 @@ static const struct i2c_device_id ads1015_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ads1015_id);
 
+static const struct of_device_id ads1015_of_match[] = {
+	{
+		.compatible = "ti,ads1015",
+		.data = (void *)ads1015
+	},
+	{
+		.compatible = "ti,ads1115",
+		.data = (void *)ads1115
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ads1015_of_match);
+
 static struct i2c_driver ads1015_driver = {
 	.driver = {
 		.name = "ads1015",
+		.of_match_table = of_match_ptr(ads1015_of_match),
 	},
 	.probe = ads1015_probe,
 	.remove = ads1015_remove,

diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
@@ -31,9 +31,11 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_data/ads7828.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/regulator/consumer.h>
 
 /* The ADS7828 registers */
 #define ADS7828_CMD_SD_SE	0x80	/* Single ended inputs */
@@ -118,9 +120,12 @@ static int ads7828_probe(struct i2c_client *client,
 	struct ads7828_data *data;
 	struct device *hwmon_dev;
 	unsigned int vref_mv = ADS7828_INT_VREF_MV;
+	unsigned int vref_uv;
 	bool diff_input = false;
 	bool ext_vref = false;
 	unsigned int regval;
+	enum ads7828_chips chip;
+	struct regulator *reg;
 
 	data = devm_kzalloc(dev, sizeof(struct ads7828_data), GFP_KERNEL);
 	if (!data)
@@ -131,14 +136,32 @@ static int ads7828_probe(struct i2c_client *client,
 		ext_vref = pdata->ext_vref;
 		if (ext_vref && pdata->vref_mv)
 			vref_mv = pdata->vref_mv;
+	} else if (dev->of_node) {
+		diff_input = of_property_read_bool(dev->of_node,
+						   "ti,differential-input");
+		reg = devm_regulator_get_optional(dev, "vref");
+		if (!IS_ERR(reg)) {
+			vref_uv = regulator_get_voltage(reg);
+			vref_mv = DIV_ROUND_CLOSEST(vref_uv, 1000);
+			if (vref_mv < ADS7828_EXT_VREF_MV_MIN ||
+			    vref_mv > ADS7828_EXT_VREF_MV_MAX)
+				return -EINVAL;
+			ext_vref = true;
+		}
 	}
 
+	if (client->dev.of_node)
+		chip = (enum ads7828_chips)
+			of_device_get_match_data(&client->dev);
+	else
+		chip = id->driver_data;
+
 	/* Bound Vref with min/max values */
 	vref_mv = clamp_val(vref_mv, ADS7828_EXT_VREF_MV_MIN,
 			    ADS7828_EXT_VREF_MV_MAX);
 
 	/* ADS7828 uses 12-bit samples, while ADS7830 is 8-bit */
-	if (id->driver_data == ads7828) {
+	if (chip == ads7828) {
 		data->lsb_resol = DIV_ROUND_CLOSEST(vref_mv * 1000, 4096);
 		data->regmap = devm_regmap_init_i2c(client,
 						    &ads2828_regmap_config);
@@ -177,9 +200,23 @@ static const struct i2c_device_id ads7828_device_ids[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ads7828_device_ids);
 
+static const struct of_device_id ads7828_of_match[] = {
+	{
+		.compatible = "ti,ads7828",
+		.data = (void *)ads7828
+	},
+	{
+		.compatible = "ti,ads7830",
+		.data = (void *)ads7830
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ads7828_of_match);
+
 static struct i2c_driver ads7828_driver = {
 	.driver = {
 		.name = "ads7828",
+		.of_match_table = of_match_ptr(ads7828_of_match),
 	},
 
 	.id_table = ads7828_device_ids,