Merge tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.12-rc7, including fixes from can, ipsec,
  mac80211, wireless, and bpf trees.

  No scary regressions here or in the works, but small fixes for 5.12
  changes keep coming.

  Current release - regressions:

   - virtio: do not pull payload in skb->head

   - virtio: ensure mac header is set in virtio_net_hdr_to_skb()

   - Revert "net: correct sk_acceptq_is_full()"

   - mptcp: revert "mptcp: provide subflow aware release function"

   - ethernet: lan743x: fix ethernet frame cutoff issue

   - dsa: fix type was not set for devlink port

   - ethtool: remove link_mode param and derive link params from driver

   - sched: htb: fix null pointer dereference on a null new_q

   - wireless: iwlwifi: Fix softirq/hardirq disabling in
     iwl_pcie_enqueue_hcmd()

   - wireless: iwlwifi: fw: fix notification wait locking

   - wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding the
     rtnl dependency

  Current release - new code bugs:

   - napi: fix hangup on napi_disable for threaded napi

   - bpf: take module reference for trampoline in module

   - wireless: mt76: mt7921: fix airtime reporting and related tx hangs

   - wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
     config command

  Previous releases - regressions:

   - rfkill: revert back to old userspace API by default

   - nfc: fix infinite loop, refcount & memory leaks in LLCP sockets

   - let skb_orphan_partial wake-up waiters

   - xfrm/compat: Cleanup WARN()s that can be user-triggered

   - vxlan, geneve: do not modify the shared tunnel info when PMTU
     triggers an ICMP reply

   - can: fix msg_namelen values depending on CAN_REQUIRED_SIZE

   - can: uapi: mark union inside struct can_frame packed

   - sched: cls: fix action overwrite reference counting

   - sched: cls: fix err handler in tcf_action_init()

   - ethernet: mlxsw: fix ECN marking in tunnel decapsulation

   - ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx

   - ethernet: i40e: fix receiving of single packets in xsk zero-copy
     mode

   - ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic

  Previous releases - always broken:

   - bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET

   - bpf: Refcount task stack in bpf_get_task_stack

   - bpf, x86: Validate computation of branch displacements

   - ieee802154: fix many similar syzbot-found bugs
       - fix NULL dereferences in netlink attribute handling
       - reject unsupported operations on monitor interfaces
       - fix error handling in llsec_key_alloc()

   - xfrm: make ipv4 pmtu check honor ip header df

   - xfrm: make hash generation lock per network namespace

   - xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
     offload

   - ethtool: fix incorrect datatype in set_eee ops

   - xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory
     model

   - openvswitch: fix send of uninitialized stack memory in ct limit
     reply

  Misc:

   - udp: add get handling for UDP_GRO sockopt"

* tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (182 commits)
  net: fix hangup on napi_disable for threaded napi
  net: hns3: Trivial spell fix in hns3 driver
  lan743x: fix ethernet frame cutoff issue
  net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh
  net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits
  net: dsa: lantiq_gswip: Don't use PHY auto polling
  net: sched: sch_teql: fix null-pointer dereference
  ipv6: report errors for iftoken via netlink extack
  net: sched: fix err handler in tcf_action_init()
  net: sched: fix action overwrite reference counting
  Revert "net: sched: bump refcount for new action in ACT replace mode"
  ice: fix memory leak of aRFS after resuming from suspend
  i40e: Fix sparse warning: missing error code 'err'
  i40e: Fix sparse error: 'vsi->netdev' could be null
  i40e: Fix sparse error: uninitialized symbol 'ring'
  i40e: Fix sparse errors in i40e_txrx.c
  i40e: Fix parameters in aq_get_phy_register()
  nl80211: fix beacon head validation
  bpf, x86: Validate computation of branch displacements for x86-32
  bpf, x86: Validate computation of branch displacements for x86-64
  ...

Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml

@@ -32,7 +32,7 @@ required:
   - interrupts
   - interrupt-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/net/ethernet-controller.yaml

@@ -49,7 +49,7 @@ properties:
     description:
       Reference to an nvmem node for the MAC address
 
-  nvmem-cells-names:
+  nvmem-cell-names:
     const: mac-address
 
   phy-connection-type:

Documentation/devicetree/bindings/net/micrel-ksz90x1.txt

@@ -65,6 +65,71 @@ KSZ9031:
   step is 60ps. The default value is the neutral setting, so setting
   rxc-skew-ps=<0> actually results in -900 picoseconds adjustment.
 
+  The KSZ9031 hardware supports a range of skew values from negative to
+  positive, where the specific range is property dependent. All values
+  specified in the devicetree are offset by the minimum value so they
+  can be represented as positive integers in the devicetree since it's
+  difficult to represent a negative number in the devictree.
+
+  The following 5-bit values table apply to rxc-skew-ps and txc-skew-ps.
+
+  Pad Skew Value	Delay (ps)	Devicetree Value
+  ------------------------------------------------------
+  0_0000		-900ps		0
+  0_0001		-840ps		60
+  0_0010		-780ps		120
+  0_0011		-720ps		180
+  0_0100		-660ps		240
+  0_0101		-600ps		300
+  0_0110		-540ps		360
+  0_0111		-480ps		420
+  0_1000		-420ps		480
+  0_1001		-360ps		540
+  0_1010		-300ps		600
+  0_1011		-240ps		660
+  0_1100		-180ps		720
+  0_1101		-120ps		780
+  0_1110		-60ps		840
+  0_1111		0ps		900
+  1_0000		60ps		960
+  1_0001		120ps		1020
+  1_0010		180ps		1080
+  1_0011		240ps		1140
+  1_0100		300ps		1200
+  1_0101		360ps		1260
+  1_0110		420ps		1320
+  1_0111		480ps		1380
+  1_1000		540ps		1440
+  1_1001		600ps		1500
+  1_1010		660ps		1560
+  1_1011		720ps		1620
+  1_1100		780ps		1680
+  1_1101		840ps		1740
+  1_1110		900ps		1800
+  1_1111		960ps		1860
+
+  The following 4-bit values table apply to the txdX-skew-ps, rxdX-skew-ps
+  data pads, and the rxdv-skew-ps, txen-skew-ps control pads.
+
+  Pad Skew Value	Delay (ps)	Devicetree Value
+  ------------------------------------------------------
+  0000			-420ps		0
+  0001			-360ps		60
+  0010			-300ps		120
+  0011			-240ps		180
+  0100			-180ps		240
+  0101			-120ps		300
+  0110			-60ps		360
+  0111			0ps		420
+  1000			60ps		480
+  1001			120ps		540
+  1010			180ps		600
+  1011			240ps		660
+  1100			300ps		720
+  1101			360ps		780
+  1110			420ps		840
+  1111			480ps		900
+
   Optional properties:
 
     Maximum value of 1860, default value 900:
@@ -120,11 +185,21 @@ KSZ9131:
 
 Examples:
 
+	/* Attach to an Ethernet device with autodetected PHY */
+	&enet {
+		rxc-skew-ps = <1800>;
+		rxdv-skew-ps = <0>;
+		txc-skew-ps = <1800>;
+		txen-skew-ps = <0>;
+		status = "okay";
+	};
+
+	/* Attach to an explicitly-specified PHY */
 	mdio {
 		phy0: ethernet-phy@0 {
-			rxc-skew-ps = <3000>;
+			rxc-skew-ps = <1800>;
 			rxdv-skew-ps = <0>;
-			txc-skew-ps = <3000>;
+			txc-skew-ps = <1800>;
 			txen-skew-ps = <0>;
 			reg = <0>;
 		};
@@ -133,3 +208,20 @@ Examples:
 		phy = <&phy0>;
 		phy-mode = "rgmii-id";
 	};
+
+References
+
+  Micrel ksz9021rl/rn Data Sheet, Revision 1.2. Dated 2/13/2014.
+  http://www.micrel.com/_PDF/Ethernet/datasheets/ksz9021rl-rn_ds.pdf
+
+  Micrel ksz9031rnx Data Sheet, Revision 2.1. Dated 11/20/2014.
+  http://www.micrel.com/_PDF/Ethernet/datasheets/KSZ9031RNX.pdf
+
+Notes:
+
+  Note that a previous version of the Micrel ksz9021rl/rn Data Sheet
+  was missing extended register 106 (transmit data pad skews), and
+  incorrectly specified the ps per step as 200ps/step instead of
+  120ps/step. The latest update to this document reflects the latest
+  revision of the Micrel specification even though usage in the kernel
+  still reflects that incorrect document.

Documentation/networking/ethtool-netlink.rst

@@ -976,9 +976,9 @@ constraints on coalescing parameters and their values.
 
 
 PAUSE_GET
-============
+=========
 
-Gets channel counts like ``ETHTOOL_GPAUSE`` ioctl request.
+Gets pause frame settings like ``ETHTOOL_GPAUSEPARAM`` ioctl request.
 
 Request contents:
 
@@ -1007,7 +1007,7 @@ the statistics in the following structure:
 Each member has a corresponding attribute defined.
 
 PAUSE_SET
-============
+=========
 
 Sets pause parameters like ``ETHTOOL_GPAUSEPARAM`` ioctl request.
 
@@ -1024,7 +1024,7 @@ Request contents:
 EEE_GET
 =======
 
-Gets channel counts like ``ETHTOOL_GEEE`` ioctl request.
+Gets Energy Efficient Ethernet settings like ``ETHTOOL_GEEE`` ioctl request.
 
 Request contents:
 
@@ -1054,7 +1054,7 @@ first 32 are provided by the ``ethtool_ops`` callback.
 EEE_SET
 =======
 
-Sets pause parameters like ``ETHTOOL_GEEEPARAM`` ioctl request.
+Sets Energy Efficient Ethernet parameters like ``ETHTOOL_SEEE`` ioctl request.
 
 Request contents:
 

MAINTAINERS

@@ -14850,6 +14850,14 @@ L:	[email protected]
 S:	Maintained
 F:	drivers/iommu/arm/arm-smmu/qcom_iommu.c
 
+QUALCOMM IPC ROUTER (QRTR) DRIVER
+M:	Manivannan Sadhasivam <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	include/trace/events/qrtr.h
+F:	include/uapi/linux/qrtr.h
+F:	net/qrtr/
+
 QUALCOMM IPCC MAILBOX DRIVER
 M:	Manivannan Sadhasivam <[email protected]>
 L:	[email protected]

arch/x86/net/bpf_jit_comp.c

@@ -1689,7 +1689,16 @@ st:			if (is_imm8(insn->off))
 		}
 
 		if (image) {
-			if (unlikely(proglen + ilen > oldproglen)) {
+			/*
+			 * When populating the image, assert that:
+			 *
+			 *  i) We do not write beyond the allocated space, and
+			 * ii) addrs[i] did not change from the prior run, in order
+			 *     to validate assumptions made for computing branch
+			 *     displacements.
+			 */
+			if (unlikely(proglen + ilen > oldproglen ||
+				     proglen + ilen != addrs[i])) {
 				pr_err("bpf_jit: fatal error\n");
 				return -EFAULT;
 			}

arch/x86/net/bpf_jit_comp32.c

@@ -2276,7 +2276,16 @@ emit_cond_jmp:		jmp_cond = get_cond_jmp_opcode(BPF_OP(code), false);
 		}
 
 		if (image) {
-			if (unlikely(proglen + ilen > oldproglen)) {
+			/*
+			 * When populating the image, assert that:
+			 *
+			 *  i) We do not write beyond the allocated space, and
+			 * ii) addrs[i] did not change from the prior run, in order
+			 *     to validate assumptions made for computing branch
+			 *     displacements.
+			 */
+			if (unlikely(proglen + ilen > oldproglen ||
+				     proglen + ilen != addrs[i])) {
 				pr_err("bpf_jit: fatal error\n");
 				return -EFAULT;
 			}

drivers/net/can/spi/mcp251x.c

@@ -314,6 +314,18 @@ static int mcp251x_spi_trans(struct spi_device *spi, int len)
 	return ret;
 }
 
+static int mcp251x_spi_write(struct spi_device *spi, int len)
+{
+	struct mcp251x_priv *priv = spi_get_drvdata(spi);
+	int ret;
+
+	ret = spi_write(spi, priv->spi_tx_buf, len);
+	if (ret)
+		dev_err(&spi->dev, "spi write failed: ret = %d\n", ret);
+
+	return ret;
+}
+
 static u8 mcp251x_read_reg(struct spi_device *spi, u8 reg)
 {
 	struct mcp251x_priv *priv = spi_get_drvdata(spi);
@@ -361,7 +373,7 @@ static void mcp251x_write_reg(struct spi_device *spi, u8 reg, u8 val)
 	priv->spi_tx_buf[1] = reg;
 	priv->spi_tx_buf[2] = val;
 
-	mcp251x_spi_trans(spi, 3);
+	mcp251x_spi_write(spi, 3);
 }
 
 static void mcp251x_write_2regs(struct spi_device *spi, u8 reg, u8 v1, u8 v2)
@@ -373,7 +385,7 @@ static void mcp251x_write_2regs(struct spi_device *spi, u8 reg, u8 v1, u8 v2)
 	priv->spi_tx_buf[2] = v1;
 	priv->spi_tx_buf[3] = v2;
 
-	mcp251x_spi_trans(spi, 4);
+	mcp251x_spi_write(spi, 4);
 }
 
 static void mcp251x_write_bits(struct spi_device *spi, u8 reg,
@@ -386,7 +398,7 @@ static void mcp251x_write_bits(struct spi_device *spi, u8 reg,
 	priv->spi_tx_buf[2] = mask;
 	priv->spi_tx_buf[3] = val;
 
-	mcp251x_spi_trans(spi, 4);
+	mcp251x_spi_write(spi, 4);
 }
 
 static u8 mcp251x_read_stat(struct spi_device *spi)
@@ -618,7 +630,7 @@ static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf,
 					  buf[i]);
 	} else {
 		memcpy(priv->spi_tx_buf, buf, TXBDAT_OFF + len);
-		mcp251x_spi_trans(spi, TXBDAT_OFF + len);
+		mcp251x_spi_write(spi, TXBDAT_OFF + len);
 	}
 }
 
@@ -650,7 +662,7 @@ static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame,
 
 	/* use INSTRUCTION_RTS, to avoid "repeated frame problem" */
 	priv->spi_tx_buf[0] = INSTRUCTION_RTS(1 << tx_buf_idx);
-	mcp251x_spi_trans(priv->spi, 1);
+	mcp251x_spi_write(priv->spi, 1);
 }
 
 static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,
@@ -888,7 +900,7 @@ static int mcp251x_hw_reset(struct spi_device *spi)
 	mdelay(MCP251X_OST_DELAY_MS);
 
 	priv->spi_tx_buf[0] = INSTRUCTION_RESET;
-	ret = mcp251x_spi_trans(spi, 1);
+	ret = mcp251x_spi_write(spi, 1);
 	if (ret)
 		return ret;
 

drivers/net/can/usb/peak_usb/pcan_usb_core.c

@@ -857,7 +857,7 @@ static int peak_usb_create_dev(const struct peak_usb_adapter *peak_usb_adapter,
 	if (dev->adapter->dev_set_bus) {
 		err = dev->adapter->dev_set_bus(dev, 0);
 		if (err)
-			goto lbl_unregister_candev;
+			goto adap_dev_free;
 	}
 
 	/* get device number early */
@@ -869,6 +869,10 @@ static int peak_usb_create_dev(const struct peak_usb_adapter *peak_usb_adapter,
 
 	return 0;
 
+adap_dev_free:
+	if (dev->adapter->dev_free)
+		dev->adapter->dev_free(dev);
+
 lbl_unregister_candev:
 	unregister_candev(netdev);