Merge tag 'asoc-v3.18-rc5' of git://git.kernel.org/pub/scm/linux/kern…

…el/git/broonie/sound into for-linus

ASoC: Fixes for v3.18

As well as the usual driver fixes there's a few other things here:

One is a fix for a race in DPCM which is unfortuantely a rather large
diffstat, this is the result of growing usage of the mainline code and
hence more detailed testing so I'm relatively happy.

The other is a fix for non-DT machine driver matching following some of
the componentization work which is much more focused.

Both have had a while to cook in -next.

Documentation/ABI/testing/sysfs-ibft

@@ -20,4 +20,4 @@ Date:		November 2007
 Contact:	Konrad Rzeszutek <[email protected]>
 Description:	The /sys/firmware/ibft/ethernetX directory will contain
 		files that expose the iSCSI Boot Firmware Table NIC data.
-		This can this can the IP address, MAC, and gateway of the NIC.
+		Usually this contains the IP address, MAC, and gateway of the NIC.

Documentation/DocBook/media/Makefile

@@ -25,7 +25,7 @@ GENFILES := $(addprefix $(MEDIA_OBJ_DIR)/, $(MEDIA_TEMP))
 PHONY += cleanmediadocs
 
 cleanmediadocs:
-	-@rm `find $(MEDIA_OBJ_DIR) -type l` $(GENFILES) $(OBJIMGFILES) 2>/dev/null
+	-@rm -f `find $(MEDIA_OBJ_DIR) -type l` $(GENFILES) $(OBJIMGFILES) 2>/dev/null
 
 $(obj)/media_api.xml: $(GENFILES) FORCE
 

Documentation/DocBook/media/v4l/compat.xml

@@ -2566,6 +2566,10 @@ fields changed from _s32 to _u32.
 	  <para>Added compound control types and &VIDIOC-QUERY-EXT-CTRL;.
 	  </para>
         </listitem>
+      </orderedlist>
+    </section>
+
+    <section>
       <title>V4L2 in Linux 3.18</title>
       <orderedlist>
 	<listitem>

Documentation/HOWTO

@@ -324,7 +324,6 @@ tree, they need to be integration-tested.  For this purpose, a special
 testing repository exists into which virtually all subsystem trees are
 pulled on an almost daily basis:
 	http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
-	http://linux.f-seidel.de/linux-next/pmwiki/
 
 This way, the -next kernel gives a summary outlook onto what will be
 expected to go into the mainline kernel at the next merge period.

Documentation/SubmittingPatches

@@ -483,12 +483,10 @@ have been included in the discussion
 
 14) Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes:
 
-If this patch fixes a problem reported by somebody else, consider adding a
-Reported-by: tag to credit the reporter for their contribution.  Please
-note that this tag should not be added without the reporter's permission,
-especially if the problem was not reported in a public forum.  That said,
-if we diligently credit our bug reporters, they will, hopefully, be
-inspired to help us again in the future.
+The Reported-by tag gives credit to people who find bugs and report them and it
+hopefully inspires them to help us again in the future.  Please note that if
+the bug was reported in private, then ask for permission first before using the
+Reported-by tag.
 
 A Tested-by: tag indicates that the patch has been successfully tested (in
 some environment) by the person named.  This tag informs maintainers that

Documentation/development-process/2.Process

@@ -289,10 +289,6 @@ lists when they are assembled; they can be downloaded from:
 
 	http://www.kernel.org/pub/linux/kernel/next/
 
-Some information about linux-next has been gathered at:
-
-	http://linux.f-seidel.de/linux-next/pmwiki/
-
 Linux-next has become an integral part of the kernel development process;
 all patches merged during a given merge window should really have found
 their way into linux-next some time before the merge window opens.

Documentation/development-process/8.Conclusion

@@ -22,10 +22,6 @@ Beyond that, a valuable resource for kernel developers is:
 
 	http://kernelnewbies.org/
 
-Information about the linux-next tree gathers at:
-
-	http://linux.f-seidel.de/linux-next/pmwiki/
-
 And, of course, one should not forget http://kernel.org/, the definitive
 location for kernel release information.
 

Documentation/devicetree/bindings/ata/sata_rcar.txt

@@ -3,8 +3,10 @@
 Required properties:
 - compatible		: should contain one of the following:
 			  - "renesas,sata-r8a7779" for R-Car H1
-			  - "renesas,sata-r8a7790" for R-Car H2
-			  - "renesas,sata-r8a7791" for R-Car M2
+			  - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
+			  - "renesas,sata-r8a7790" for R-Car H2 other than ES1
+			  - "renesas,sata-r8a7791" for R-Car M2-W
+			  - "renesas,sata-r8a7793" for R-Car M2-N
 - reg			: address and length of the SATA registers;
 - interrupts		: must consist of one interrupt specifier.
 

Documentation/devicetree/bindings/net/smsc-lan91c111.txt

@@ -11,3 +11,5 @@ Optional properties:
   are supported on the device.  Valid value for SMSC LAN91c111 are
   1, 2 or 4.  If it's omitted or invalid, the size would be 2 meaning
   16-bit access only.
+- power-gpios: GPIO to control the PWRDWN pin
+- reset-gpios: GPIO to control the RESET pin

Documentation/devicetree/bindings/submitting-patches.txt

@@ -12,6 +12,9 @@ I. For patch submitters
 
        [email protected]
 
+  3) The Documentation/ portion of the patch should come in the series before
+     the code implementing the binding.
+
 II. For kernel maintainers
 
   1) If you aren't comfortable reviewing a given binding, reply to it and ask

Documentation/devicetree/bindings/thermal/rcar-thermal.txt

@@ -7,7 +7,10 @@ Required properties:
 			    - "renesas,thermal-r8a73a4" (R-Mobile AP6)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
 			    - "renesas,thermal-r8a7790" (R-Car H2)
-			    - "renesas,thermal-r8a7791" (R-Car M2)
+			    - "renesas,thermal-r8a7791" (R-Car M2-W)
+			    - "renesas,thermal-r8a7792" (R-Car V2H)
+			    - "renesas,thermal-r8a7793" (R-Car M2-N)
+			    - "renesas,thermal-r8a7794" (R-Car E2)
 - reg			: Address range of the thermal registers.
 			  The 1st reg will be recognized as common register
 			  if it has "interrupts".

Documentation/input/elantech.txt

@@ -38,22 +38,38 @@ Contents
         7.2.1 Status packet
         7.2.2 Head packet
         7.2.3 Motion packet
+ 8. Trackpoint (for Hardware version 3 and 4)
+    8.1 Registers
+    8.2 Native relative mode 6 byte packet format
+        8.2.1 Status Packet
 
 
 
 1. Introduction
    ~~~~~~~~~~~~
 
-Currently the Linux Elantech touchpad driver is aware of two different
-hardware versions unimaginatively called version 1 and version 2. Version 1
-is found in "older" laptops and uses 4 bytes per packet. Version 2 seems to
-be introduced with the EeePC and uses 6 bytes per packet, and provides
-additional features such as position of two fingers, and width of the touch.
+Currently the Linux Elantech touchpad driver is aware of four different
+hardware versions unimaginatively called version 1,version 2, version 3
+and version 4. Version 1 is found in "older" laptops and uses 4 bytes per
+packet. Version 2 seems to be introduced with the EeePC and uses 6 bytes
+per packet, and provides additional features such as position of two fingers,
+and width of the touch.  Hardware version 3 uses 6 bytes per packet (and
+for 2 fingers the concatenation of two 6 bytes packets) and allows tracking
+of up to 3 fingers. Hardware version 4 uses 6 bytes per packet, and can
+combine a status packet with multiple head or motion packets. Hardware version
+4 allows tracking up to 5 fingers.
+
+Some Hardware version 3 and version 4 also have a trackpoint which uses a
+separate packet format. It is also 6 bytes per packet.
 
 The driver tries to support both hardware versions and should be compatible
 with the Xorg Synaptics touchpad driver and its graphical configuration
 utilities.
 
+Note that a mouse button is also associated with either the touchpad or the
+trackpoint when a trackpoint is available.  Disabling the Touchpad in xorg
+(TouchPadOff=0) will also disable the buttons associated with the touchpad.
+
 Additionally the operation of the touchpad can be altered by adjusting the
 contents of some of its internal registers. These registers are represented
 by the driver as sysfs entries under /sys/bus/serio/drivers/psmouse/serio?
@@ -78,7 +94,7 @@ completeness sake.
 2. Extra knobs
    ~~~~~~~~~~~
 
-Currently the Linux Elantech touchpad driver provides two extra knobs under
+Currently the Linux Elantech touchpad driver provides three extra knobs under
 /sys/bus/serio/drivers/psmouse/serio? for the user.
 
 * debug
@@ -112,6 +128,20 @@ Currently the Linux Elantech touchpad driver provides two extra knobs under
    data consistency checking can be done. For now checking is disabled by
    default. Currently even turning it on will do nothing.
 
+* crc_enabled
+
+   Sets crc_enabled to 0/1. The name "crc_enabled" is the official name of
+   this integrity check, even though it is not an actual cyclic redundancy
+   check.
+
+   Depending on the state of crc_enabled, certain basic data integrity
+   verification is done by the driver on hardware version 3 and 4. The
+   driver will reject any packet that appears corrupted. Using this knob,
+   The state of crc_enabled can be altered with this knob.
+
+   Reading the crc_enabled value will show the active value. Echoing
+   "0" or "1" to this file will set the state to "0" or "1".
+
 /////////////////////////////////////////////////////////////////////////////
 
 3. Differentiating hardware versions
@@ -746,3 +776,42 @@ byte 5:
 
         byte 0 ~ 2 for one finger
         byte 3 ~ 5 for another
+
+
+8. Trackpoint (for Hardware version 3 and 4)
+   =========================================
+8.1 Registers
+    ~~~~~~~~~
+No special registers have been identified.
+
+8.2 Native relative mode 6 byte packet format
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+8.2.1 Status Packet
+      ~~~~~~~~~~~~~
+
+byte 0:
+   bit   7   6   5   4   3   2   1   0
+         0   0  sx  sy   0   M   R   L
+byte 1:
+   bit   7   6   5   4   3   2   1   0
+       ~sx   0   0   0   0   0   0   0
+byte 2:
+   bit   7   6   5   4   3   2   1   0
+       ~sy   0   0   0   0   0   0   0
+byte 3:
+   bit   7   6   5   4   3   2   1   0
+         0   0 ~sy ~sx   0   1   1   0
+byte 4:
+   bit   7   6   5   4   3   2   1   0
+        x7  x6  x5  x4  x3  x2  x1  x0
+byte 5:
+   bit   7   6   5   4   3   2   1   0
+        y7  y6  y5  y4  y3  y2  y1  y0
+
+
+         x and y are written in two's complement spread
+             over 9 bits with sx/sy the relative top bit and
+             x7..x0 and y7..y0 the lower bits.
+	 ~sx is the inverse of sx, ~sy is the inverse of sy.
+         The sign of y is opposite to what the input driver
+             expects for a relative movement

Documentation/kernel-parameters.txt

@@ -1264,7 +1264,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	i8042.noloop	[HW] Disable the AUX Loopback command while probing
 			     for the AUX port
 	i8042.nomux	[HW] Don't check presence of an active multiplexing
-			     controller. Default: true.
+			     controller
 	i8042.nopnp	[HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
 			     controllers
 	i8042.notimeout	[HW] Ignore timeout condition signalled by controller
@@ -1307,6 +1307,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			.cdrom .chs .ignore_cable are additional options
 			See Documentation/ide/ide.txt.
 
+	ide-generic.probe-mask= [HW] (E)IDE subsystem
+			Format: <int>
+			Probe mask for legacy ISA IDE ports.  Depending on
+			platform up to 6 ports are supported, enabled by
+			setting corresponding bits in the mask to 1.  The
+			default value is 0x0, which has a special meaning.
+			On systems that have PCI, it triggers scanning the
+			PCI bus for the first and the second port, which
+			are then probed.  On systems without PCI the value
+			of 0x0 enables probing the two first ports as if it
+			was 0x3.
+
 	ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
 			Claim all unknown PCI IDE storage controllers.
 
@@ -1587,6 +1599,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	kmemleak=	[KNL] Boot-time kmemleak enable/disable
 			Valid arguments: on, off
 			Default: on
+			Built with CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y,
+			the default is off.
 
 	kmemcheck=	[X86] Boot-time kmemcheck enable/disable/one-shot mode
 			Valid arguments: 0, 1, 2
@@ -3607,7 +3621,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	usb-storage.delay_use=
 			[UMS] The delay in seconds before a new device is
-			scanned for Logical Units (default 5).
+			scanned for Logical Units (default 1).
 
 	usb-storage.quirks=
 			[UMS] A list of quirks entries to supplement or

Documentation/kmemleak.txt

@@ -62,6 +62,10 @@ Memory may be allocated or freed before kmemleak is initialised and
 these actions are stored in an early log buffer. The size of this buffer
 is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
 
+If CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF are enabled, the kmemleak is
+disabled by default. Passing "kmemleak=on" on the kernel command
+line enables the function. 
+
 Basic Algorithm
 ---------------
 

Documentation/networking/ip-sysctl.txt

@@ -56,6 +56,13 @@ ip_forward_use_pmtu - BOOLEAN
 	0 - disabled
 	1 - enabled
 
+fwmark_reflect - BOOLEAN
+	Controls the fwmark of kernel-generated IPv4 reply packets that are not
+	associated with a socket for example, TCP RSTs or ICMP echo replies).
+	If unset, these packets have a fwmark of zero. If set, they have the
+	fwmark of the packet they are replying to.
+	Default: 0
+
 route/max_size - INTEGER
 	Maximum number of routes allowed in the kernel.  Increase
 	this when using large numbers of interfaces and/or routes.
@@ -1201,6 +1208,13 @@ conf/all/forwarding - BOOLEAN
 proxy_ndp - BOOLEAN
 	Do proxy ndp.
 
+fwmark_reflect - BOOLEAN
+	Controls the fwmark of kernel-generated IPv6 reply packets that are not
+	associated with a socket for example, TCP RSTs or ICMPv6 echo replies).
+	If unset, these packets have a fwmark of zero. If set, they have the
+	fwmark of the packet they are replying to.
+	Default: 0
+
 conf/interface/*:
 	Change special settings per interface.
 

Documentation/prctl/Makefile

@@ -1,5 +1,5 @@
 # List of programs to build
-hostprogs-y := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test disable-tsc-test
+hostprogs-$(CONFIG_X86) := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test disable-tsc-test
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
 

Documentation/ptp/testptp.mk

@@ -0,0 +1,33 @@
+# PTP 1588 clock support - User space test program
+#
+# Copyright (C) 2010 OMICRON electronics GmbH
+#
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+CC        = $(CROSS_COMPILE)gcc
+INC       = -I$(KBUILD_OUTPUT)/usr/include
+CFLAGS    = -Wall $(INC)
+LDLIBS    = -lrt
+PROGS     = testptp
+
+all: $(PROGS)
+
+testptp: testptp.o
+
+clean:
+	rm -f testptp.o
+
+distclean: clean
+	rm -f $(PROGS)

Documentation/vDSO/Makefile

@@ -10,3 +10,6 @@ always := $(hostprogs-y)
 HOSTCFLAGS := -I$(objtree)/usr/include -std=gnu99
 HOSTCFLAGS_vdso_standalone_test_x86.o := -fno-asynchronous-unwind-tables -fno-stack-protector
 HOSTLOADLIBES_vdso_standalone_test_x86 := -nostdlib
+ifeq ($(CONFIG_X86_32),y)
+HOSTLOADLIBES_vdso_standalone_test_x86 += -lgcc_s
+endif

Documentation/vDSO/vdso_standalone_test_x86.c

@@ -63,7 +63,7 @@ static inline void linux_exit(int code)
 	x86_syscall3(__NR_exit, code, 0, 0);
 }
 
-void to_base10(char *lastdig, uint64_t n)
+void to_base10(char *lastdig, time_t n)
 {
 	while (n) {
 		*lastdig = (n % 10) + '0';