ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos

The arch/arm/mach-exynos4 directory (CONFIG_ARCH_EXYNOS4) has
made for plaforms based on EXYNOS4 SoCs. But since upcoming
Samsung's SoCs such as EXYNOS5 (ARM Cortex A15) can reuse most
codes in current mach-exynos4, one mach-exynos directory will
be used for them.

This patch changes to CONFIG_ARCH_EXYNOS (arch/arm/mach-exynos)
but keeps original CONFIG_ARCH_EXYNOS4 in mach-exynos/Kconfig to
avoid changing in driver side.

Cc: Arnd Bergmann <[email protected]>
Cc: Russell King <[email protected]>
Signed-off-by: Kukjin Kim <[email protected]>

arch/arm/Kconfig

@@ -837,8 +837,8 @@ config ARCH_S5PV210
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
-config ARCH_EXYNOS4
-	bool "Samsung EXYNOS4"
+config ARCH_EXYNOS
+	bool "SAMSUNG EXYNOS"
 	select CPU_V7
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_HAS_HOLES_MEMORYMODEL
@@ -852,7 +852,7 @@ config ARCH_EXYNOS4
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select NEED_MACH_MEMORY_H
 	help
-	  Samsung EXYNOS4 series based systems
+	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
 
 config ARCH_SHARK
 	bool "Shark"
@@ -1079,7 +1079,7 @@ source "arch/arm/mach-s5pc100/Kconfig"
 
 source "arch/arm/mach-s5pv210/Kconfig"
 
-source "arch/arm/mach-exynos4/Kconfig"
+source "arch/arm/mach-exynos/Kconfig"
 
 source "arch/arm/mach-shmobile/Kconfig"
 

arch/arm/Makefile

@@ -180,7 +180,7 @@ machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
-machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos4
+machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile

arch/arm/configs/exynos4_defconfig

@@ -4,19 +4,18 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_EXYNOS4=y
+CONFIG_ARCH_EXYNOS=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
 CONFIG_MACH_SMDKC210=y
-CONFIG_MACH_SMDKV310=y
 CONFIG_MACH_ARMLEX4210=y
 CONFIG_MACH_UNIVERSAL_C210=y
 CONFIG_MACH_NURI=y
 CONFIG_MACH_ORIGEN=y
+CONFIG_MACH_SMDK4412=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_HOTPLUG_CPU=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
@@ -61,13 +60,9 @@ CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_S3C_UART=1
 CONFIG_CRC_CCITT=y

arch/arm/mach-exynos4/Kconfig → arch/arm/mach-exynos/Kconfig

@@ -1,4 +1,4 @@
-# arch/arm/mach-exynos4/Kconfig
+# arch/arm/mach-exynos/Kconfig
 #
 # Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
 #		http://www.samsung.com/
@@ -7,10 +7,27 @@
 
 # Configuration options for the EXYNOS4
 
-if ARCH_EXYNOS4
+if ARCH_EXYNOS
+
+menu "SAMSUNG EXYNOS SoCs Support"
+
+choice
+	prompt "EXYNOS System Type"
+	default ARCH_EXYNOS4
+
+config ARCH_EXYNOS4
+	bool "SAMSUNG EXYNOS4"
+	help
+	  Samsung EXYNOS4 SoCs based systems
+
+endchoice
+
+comment "EXYNOS SoCs"
 
 config CPU_EXYNOS4210
-	bool
+	bool "SAMSUNG EXYNOS4210"
+	default y
+	depends on ARCH_EXYNOS4
 	select SAMSUNG_DMADEV
 	select ARM_CPU_SUSPEND if PM
 	select S5P_PM if PM
@@ -19,15 +36,18 @@ config CPU_EXYNOS4210
 	  Enable EXYNOS4210 CPU support
 
 config SOC_EXYNOS4212
-	bool
-	select ARM_CPU_SUSPEND if PM
+	bool "SAMSUNG EXYNOS4212"
+	default y
+	depends on ARCH_EXYNOS4
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	help
 	  Enable EXYNOS4212 SoC support
 
 config SOC_EXYNOS4412
-	bool
+	bool "SAMSUNG EXYNOS4412"
+	default y
+	depends on ARCH_EXYNOS4
 	help
 	  Enable EXYNOS4412 SoC support
 
@@ -125,7 +145,7 @@ config EXYNOS4_SETUP_USB_PHY
 
 # machine support
 
-menu "EXYNOS4 Machines"
+if ARCH_EXYNOS4
 
 comment "EXYNOS4210 Boards"
 
@@ -305,12 +325,11 @@ config MACH_SMDK4412
 	select MACH_SMDK4212
 	help
 	  Machine support for Samsung SMDK4412
+endif
 
-endmenu
-
-comment "Configuration for HSMMC bus width"
+if ARCH_EXYNOS4
 
-menu "Use 8-bit bus width"
+comment "Configuration for HSMMC 8-bit bus width"
 
 config EXYNOS4_SDHCI_CH0_8BIT
 	bool "Channel 0 with 8-bit bus"
@@ -323,6 +342,7 @@ config EXYNOS4_SDHCI_CH2_8BIT
 	help
 	  Support HSMMC Channel 2 8-bit bus.
 	  If selected, Channel 3 is disabled.
+endif
 
 endmenu
 

arch/arm/mach-exynos4/Makefile → arch/arm/mach-exynos/Makefile

@@ -1,4 +1,4 @@
-# arch/arm/mach-exynos4/Makefile
+# arch/arm/mach-exynos/Makefile
 #
 # Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
 #		http://www.samsung.com/
@@ -12,8 +12,8 @@ obj-				:=
 
 # Core support for EXYNOS4 system
 
-obj-$(CONFIG_ARCH_EXYNOS4)	+= cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_ARCH_EXYNOS4)	+= setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= cpu.o init.o clock.o irq-combiner.o setup-i2c0.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= irq-eint.o dma.o pmu.o
 obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
 obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
 obj-$(CONFIG_PM)		+= pm.o
@@ -39,11 +39,11 @@ obj-$(CONFIG_MACH_SMDK4412)		+= mach-smdk4x12.o
 
 # device support
 
-obj-y					+= dev-audio.o
+obj-$(CONFIG_ARCH_EXYNOS4)		+= dev-audio.o
 obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
 obj-$(CONFIG_EXYNOS4_DEV_PD)		+= dev-pd.o
 obj-$(CONFIG_EXYNOS4_DEV_SYSMMU)	+= dev-sysmmu.o
-obj-$(CONFIG_EXYNOS4_DEV_DWMCI)	+= dev-dwmci.o
+obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
 
 obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMD0)	+= setup-fimd0.o
@@ -57,5 +57,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_I2C7)	+= setup-i2c7.o
 obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
-
 obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)	+= setup-usb-phy.o

arch/arm/mach-exynos4/cpu.c → arch/arm/mach-exynos/cpu.c

@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-exynos4/cpu.c
+/* linux/arch/arm/mach-exynos/cpu.c
  *
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -40,27 +40,46 @@ extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
 extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
 
 /* Initial IO mappings */
-static struct map_desc exynos4_iodesc[] __initdata = {
+static struct map_desc exynos_iodesc[] __initdata = {
 	{
 		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
+		.pfn		= __phys_to_pfn(EXYNOS_PA_SYSTIMER),
 		.length		= SZ_4K,
-		.type	 	= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_CMU,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
-		.length		= SZ_128K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_PMU,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_PMU),
+		.pfn		= __phys_to_pfn(EXYNOS_PA_PMU),
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_COMBINER),
+		.pfn		= __phys_to_pfn(EXYNOS_PA_COMBINER),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
+		.pfn		= __phys_to_pfn(EXYNOS_PA_GIC_CPU),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
+		.pfn		= __phys_to_pfn(EXYNOS_PA_GIC_DIST),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_CMU,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
+		.length		= SZ_128K,
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_COREPERI),
@@ -91,11 +110,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC0),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_SROMC,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_SROMC),
@@ -106,16 +120,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_HSPHY),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
 	},
 };
 
@@ -137,7 +141,7 @@ static struct map_desc exynos4_iodesc1[] __initdata = {
 	},
 };
 
-static void exynos4_idle(void)
+static void exynos_idle(void)
 {
 	if (!need_resched())
 		cpu_do_idle();
@@ -151,12 +155,13 @@ static void exynos4_sw_reset(void)
 }
 
 /*
- * exynos4_map_io
+ * exynos_map_io
  *
  * register the standard cpu IO areas
  */
 void __init exynos4_map_io(void)
 {
+	iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
 	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
 
 	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
@@ -250,7 +255,6 @@ static int __init exynos4_core_init(void)
 {
 	return sysdev_class_register(&exynos4_sysclass);
 }
-
 core_initcall(exynos4_core_init);
 
 #ifdef CONFIG_CACHE_L2X0
@@ -279,15 +283,16 @@ static int __init exynos4_l2x0_cache_init(void)
 early_initcall(exynos4_l2x0_cache_init);
 #endif
 
-int __init exynos4_init(void)
+int __init exynos_init(void)
 {
-	printk(KERN_INFO "EXYNOS4: Initializing architecture\n");
+	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
 
 	/* set idle function */
-	pm_idle = exynos4_idle;
+	pm_idle = exynos_idle;
 
 	/* set sw_reset function */
-	s5p_reset_hook = exynos4_sw_reset;
+	if (soc_is_exynos4210() || soc_is_exynos4212() || soc_is_exynos4412())
+		s5p_reset_hook = exynos4_sw_reset;
 
 	return sysdev_register(&exynos4_sysdev);
 }