update

_templates/sonoff_iFan04-L

@@ -10,13 +10,14 @@ template: '{"NAME":"iFan04-L","GPIO":[17,148,0,149,0,0,29,161,23,56,22,24,0],"FL
 image: /assets/images/sonoff_iFan04-L.jpg
 mlink: https://sonoff.tech/product/wifi-diy-smart-switches/ifan03
 link: https://www.itead.cc/smart-home/sonoff-ifan03-wifi-ceiling-fan-light-controller.html
-link2: https://www.banggood.com/SONOFF-IFan03-AC100-240V-5060Hz-WiFi-Ceiling-Fan-And-Light-Controller-with-RM433-RF-Remote-Controller-p-1496747.html
-link3: https://www.aliexpress.com/item/1005002994993238.html
-link4: https://www.aliexpress.com/item/4000174097954.html
+link2: https://www.aliexpress.com/item/1005002994993238.html
+link3: 
 ---
 
-Instead of applying a template you can set the device to `Module 71` or iFan03 in *Configure - Module* settings.
-
 Largely identical to [iFan03](sonoff_iFan03) with capacitors designed for 110V fans and an improved RF chip with better range.
 
-Flashing procedure is the same, there are labelled pins required for flashing.
+Flashing procedure is the same, there are labelled pins required for flashing. Hold the button down during power up to enter flash mode.
+
+![Pinout](/assets/images/sonoff_iFan04-L_pinout.jpg)
+
+Image from Hatsuwr on [reddit](https://www.reddit.com/r/homeautomation/comments/p8cahl/ifan04_possible_missing_solder_tracks/)