Skip to content

Commit

Permalink
Merge 5.2-rc4 into char-misc-next
Browse files Browse the repository at this point in the history 
We want the char/misc driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <[email protected]>
  • Loading branch information
@gregkh
gregkh committed Jun 9, 2019
2 parents 9c3cef5 + d1fdb6d commit 0154ec7
Show file tree
Hide file tree
Showing 17,247 changed files with 26,623 additions and 125,899 deletions.
The diff you're trying to view is too large. We only load the first 3000 changed files.
8 changes: 8 additions & 0 deletions CREDITS
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3364,6 +3364,14 @@ S: Braunschweiger Strasse 79
S: 31134 Hildesheim
S: Germany

N: Martin Schwidefsky
D: Martin was the most significant contributor to the initial s390
D: port of the Linux Kernel and later the maintainer of the s390
D: architecture backend for almost two decades.
D: He passed away in 2019, and will be greatly missed.
S: Germany
W: https://lwn.net/Articles/789028/

N: Marcel Selhorst
E: [email protected]
D: TPM driver
Expand Down
29 changes: 0 additions & 29 deletions Documentation/ABI/testing/sysfs-bus-mdio
View file

This file was deleted.

19 changes: 13 additions & 6 deletions Documentation/ABI/testing/sysfs-class-net-phydev
View file
Original file line number Diff line number Diff line change
Expand Up @@ -11,24 +11,31 @@ Date: February 2014
KernelVersion: 3.15
Contact: [email protected]
Description:
Boolean value indicating whether the PHY device has
any fixups registered against it (phy_register_fixup)
This attribute contains the boolean value whether a given PHY
device has had any "fixup" workaround running on it, encoded as
a boolean. This information is provided to help troubleshooting
PHY configurations.

What: /sys/class/mdio_bus/<bus>/<device>/phy_id
Date: November 2012
KernelVersion: 3.8
Contact: [email protected]
Description:
32-bit hexadecimal value corresponding to the PHY device's OUI,
model and revision number.
This attribute contains the 32-bit PHY Identifier as reported
by the device during bus enumeration, encoded in hexadecimal.
This ID is used to match the device with the appropriate
driver.

What: /sys/class/mdio_bus/<bus>/<device>/phy_interface
Date: February 2014
KernelVersion: 3.15
Contact: [email protected]
Description:
String value indicating the PHY interface, possible
values are:.
This attribute contains the PHY interface as configured by the
Ethernet driver during bus enumeration, encoded in string.
This interface mode is used to configure the Ethernet MAC with the
appropriate mode for its data lines to the PHY hardware.
Possible values are:
<empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,
Expand Down
9 changes: 9 additions & 0 deletions Documentation/admin-guide/cgroup-v2.rst
View file
Original file line number Diff line number Diff line change
Expand Up @@ -177,6 +177,15 @@ cgroup v2 currently supports the following mount options.
ignored on non-init namespace mounts. Please refer to the
Delegation section for details.

memory_localevents

Only populate memory.events with data for the current cgroup,
and not any subtrees. This is legacy behaviour, the default
behaviour without this option is to include subtree counts.
This option is system wide and can only be set on mount or
modified through remount from the init namespace. The mount
option is ignored on non-init namespace mounts.


Organizing Processes and Threads
--------------------------------
Expand Down
1 change: 1 addition & 0 deletions Documentation/admin-guide/mm/index.rst
View file
Original file line number Diff line number Diff line change
Expand Up @@ -31,6 +31,7 @@ the Linux memory management.
ksm
memory-hotplug
numa_memory_policy
numaperf
pagemap
soft-dirty
transhuge
Expand Down
2 changes: 1 addition & 1 deletion Documentation/admin-guide/mm/numaperf.rst
View file
Original file line number Diff line number Diff line change
Expand Up @@ -15,7 +15,7 @@ characteristics. Some memory may share the same node as a CPU, and others
are provided as memory only nodes. While memory only nodes do not provide
CPUs, they may still be local to one or more compute nodes relative to
other nodes. The following diagram shows one such example of two compute
nodes with local memory and a memory only node for each of compute node:
nodes with local memory and a memory only node for each of compute node::

+------------------+ +------------------+
| Compute Node 0 +-----+ Compute Node 1 |
Expand Down
9 changes: 5 additions & 4 deletions Documentation/arm64/silicon-errata.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -58,13 +58,14 @@ stable kernels.
| ARM | Cortex-A72 | #853709 | N/A |
| ARM | Cortex-A73 | #858921 | ARM64_ERRATUM_858921 |
| ARM | Cortex-A55 | #1024718 | ARM64_ERRATUM_1024718 |
| ARM | Cortex-A76 | #1188873 | ARM64_ERRATUM_1188873 |
| ARM | Cortex-A76 | #1188873,1418040| ARM64_ERRATUM_1418040 |
| ARM | Cortex-A76 | #1165522 | ARM64_ERRATUM_1165522 |
| ARM | Cortex-A76 | #1286807 | ARM64_ERRATUM_1286807 |
| ARM | Neoverse-N1 | #1188873 | ARM64_ERRATUM_1188873 |
| ARM | MMU-500 | #841119,#826419 | N/A |
| ARM | Cortex-A76 | #1463225 | ARM64_ERRATUM_1463225 |
| ARM | Neoverse-N1 | #1188873,1418040| ARM64_ERRATUM_1418040 |
| ARM | MMU-500 | #841119,826419 | N/A |
| | | | |
| Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 |
| Cavium | ThunderX ITS | #22375,24313 | CAVIUM_ERRATUM_22375 |
| Cavium | ThunderX ITS | #23144 | CAVIUM_ERRATUM_23144 |
| Cavium | ThunderX GICv3 | #23154 | CAVIUM_ERRATUM_23154 |
| Cavium | ThunderX Core | #27456 | CAVIUM_ERRATUM_27456 |
Expand Down
2 changes: 1 addition & 1 deletion Documentation/bpf/btf.rst
View file
Original file line number Diff line number Diff line change
Expand Up @@ -131,7 +131,7 @@ The following sections detail encoding of each kind.
``btf_type`` is followed by a ``u32`` with the following bits arrangement::

#define BTF_INT_ENCODING(VAL) (((VAL) & 0x0f000000) >> 24)
#define BTF_INT_OFFSET(VAL) (((VAL & 0x00ff0000)) >> 16)
#define BTF_INT_OFFSET(VAL) (((VAL) & 0x00ff0000) >> 16)
#define BTF_INT_BITS(VAL) ((VAL) & 0x000000ff)

The ``BTF_INT_ENCODING`` has the following attributes::
Expand Down
2 changes: 1 addition & 1 deletion Documentation/conf.py
View file
Original file line number Diff line number Diff line change
Expand Up @@ -37,7 +37,7 @@
extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include', 'cdomain', 'kfigure', 'sphinx.ext.ifconfig']

# The name of the math extension changed on Sphinx 1.4
if major == 1 and minor > 3:
if (major == 1 and minor > 3) or (major > 1):
extensions.append("sphinx.ext.imgmath")
else:
extensions.append("sphinx.ext.pngmath")
Expand Down
2 changes: 1 addition & 1 deletion Documentation/devicetree/bindings/Makefile
View file
Original file line number Diff line number Diff line change
Expand Up @@ -5,7 +5,7 @@ DT_MK_SCHEMA ?= dt-mk-schema
DT_MK_SCHEMA_FLAGS := $(if $(DT_SCHEMA_FILES), -u)

quiet_cmd_chk_binding = CHKDT $(patsubst $(srctree)/%,%,$<)
cmd_chk_binding = $(DT_DOC_CHECKER) $< ; \
cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \
$(DT_EXTRACT_EX) $< > $@

$(obj)/%.example.dts: $(src)/%.yaml FORCE
Expand Down
4 changes: 2 additions & 2 deletions Documentation/devicetree/bindings/arm/arm-boards
View file
Original file line number Diff line number Diff line change
Expand Up @@ -216,7 +216,7 @@ Example:
#size-cells = <0>;

A57_0: cpu@0 {
compatible = "arm,cortex-a57","arm,armv8";
compatible = "arm,cortex-a57";
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
Expand All @@ -225,7 +225,7 @@ Example:
.....

A53_0: cpu@100 {
compatible = "arm,cortex-a53","arm,armv8";
compatible = "arm,cortex-a53";
reg = <0x0 0x100>;
device_type = "cpu";
enable-method = "psci";
Expand Down
12 changes: 6 additions & 6 deletions Documentation/devicetree/bindings/arm/cpu-capacity.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -118,7 +118,7 @@ cpus {
};

A57_0: cpu@0 {
compatible = "arm,cortex-a57","arm,armv8";
compatible = "arm,cortex-a57";
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
Expand All @@ -129,7 +129,7 @@ cpus {
};

A57_1: cpu@1 {
compatible = "arm,cortex-a57","arm,armv8";
compatible = "arm,cortex-a57";
reg = <0x0 0x1>;
device_type = "cpu";
enable-method = "psci";
Expand All @@ -140,7 +140,7 @@ cpus {
};

A53_0: cpu@100 {
compatible = "arm,cortex-a53","arm,armv8";
compatible = "arm,cortex-a53";
reg = <0x0 0x100>;
device_type = "cpu";
enable-method = "psci";
Expand All @@ -151,7 +151,7 @@ cpus {
};

A53_1: cpu@101 {
compatible = "arm,cortex-a53","arm,armv8";
compatible = "arm,cortex-a53";
reg = <0x0 0x101>;
device_type = "cpu";
enable-method = "psci";
Expand All @@ -162,7 +162,7 @@ cpus {
};

A53_2: cpu@102 {
compatible = "arm,cortex-a53","arm,armv8";
compatible = "arm,cortex-a53";
reg = <0x0 0x102>;
device_type = "cpu";
enable-method = "psci";
Expand All @@ -173,7 +173,7 @@ cpus {
};

A53_3: cpu@103 {
compatible = "arm,cortex-a53","arm,armv8";
compatible = "arm,cortex-a53";
reg = <0x0 0x103>;
device_type = "cpu";
enable-method = "psci";
Expand Down
2 changes: 1 addition & 1 deletion Documentation/devicetree/bindings/arm/omap/crossbar.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -41,7 +41,7 @@ Examples:
Consumer:
========
See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and
Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt for
Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml for
further details.

An interrupt consumer on an SoC using crossbar will use:
Expand Down
2 changes: 1 addition & 1 deletion Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -35,7 +35,7 @@ board device tree, including the system base clock, as selected by XOM[0]
pin of the SoC. Refer to generic fixed rate clock bindings
documentation[1] for more information how to specify these clocks.

[1] Documentation/devicetree/bindings/clock/fixed-clock.txt
[1] Documentation/devicetree/bindings/clock/fixed-clock.yaml

Example: Clock controller node:

Expand Down
24 changes: 13 additions & 11 deletions Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
View file
Original file line number Diff line number Diff line change
Expand Up @@ -92,6 +92,8 @@ properties:
minItems: 2
maxItems: 4

ranges: true

interrupts:
description: Interrupt source of the parent interrupt controller on
secondary GICs, or VGIC maintenance interrupt on primary GIC (see
Expand Down Expand Up @@ -197,28 +199,28 @@ examples:
interrupt-controller@e1101000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <2>;
#size-cells = <2>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
interrupts = <1 8 0xf04>;
ranges = <0 0 0 0xe1100000 0 0x100000>;
reg = <0x0 0xe1110000 0 0x01000>,
<0x0 0xe112f000 0 0x02000>,
<0x0 0xe1140000 0 0x10000>,
<0x0 0xe1160000 0 0x10000>;
ranges = <0 0xe1100000 0x100000>;
reg = <0xe1110000 0x01000>,
<0xe112f000 0x02000>,
<0xe1140000 0x10000>,
<0xe1160000 0x10000>;
v2m0: v2m@8000 {
v2m0: v2m@80000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x80000 0 0x1000>;
reg = <0x80000 0x1000>;
};
//...
v2mN: v2m@9000 {
v2mN: v2m@90000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x90000 0 0x1000>;
reg = <0x90000 0x1000>;
};
};
...
2 changes: 1 addition & 1 deletion Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -23,7 +23,7 @@ Required properties:
- marvell,spi-base : List of GIC base SPI interrupts, one for each
ODMI frame. Those SPI interrupts are 0-based,
i.e marvell,spi-base = <128> will use SPI #96.
See Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
See Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
for details about the GIC Device Tree binding.

Example:
Expand Down
2 changes: 1 addition & 1 deletion Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -15,7 +15,7 @@ Optional properties:
- power-supply: specifies the power source. It can either be a regulator
or a gpio which enables a regulator, i.e. a regulator-fixed as
described in
Documentation/devicetree/bindings/regulator/fixed-regulator.txt
Documentation/devicetree/bindings/regulator/fixed-regulator.yaml

Example:

Expand Down
2 changes: 1 addition & 1 deletion Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -24,7 +24,7 @@ Optional children nodes:
Children nodes represent the available nand chips.

Other properties:
see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.

Example demonstrate on AXG SoC:

Expand Down
6 changes: 3 additions & 3 deletions Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -101,12 +101,12 @@ Required properties:
number (e.g., 0, 1, 2, etc.)
- #address-cells : see partition.txt
- #size-cells : see partition.txt
- nand-ecc-strength : see nand.txt
- nand-ecc-step-size : must be 512 or 1024. See nand.txt
- nand-ecc-strength : see nand-controller.yaml
- nand-ecc-step-size : must be 512 or 1024. See nand-controller.yaml

Optional properties:
- nand-on-flash-bbt : boolean, to enable the on-flash BBT for this
chip-select. See nand.txt
chip-select. See nand-controller.yaml
- brcm,nand-oob-sector-size : integer, to denote the spare area sector size
expected for the ECC layout in use. This size, in
addition to the strength and step-size,
Expand Down
6 changes: 3 additions & 3 deletions Documentation/devicetree/bindings/mtd/denali-nand.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -22,16 +22,16 @@ Sub-nodes:
select is connected.

Optional properties:
- nand-ecc-step-size: see nand.txt for details.
- nand-ecc-step-size: see nand-controller.yaml for details.
If present, the value must be
512 for "altr,socfpga-denali-nand"
1024 for "socionext,uniphier-denali-nand-v5a"
1024 for "socionext,uniphier-denali-nand-v5b"
- nand-ecc-strength: see nand.txt for details. Valid values are:
- nand-ecc-strength: see nand-controller.yaml for details. Valid values are:
8, 15 for "altr,socfpga-denali-nand"
8, 16, 24 for "socionext,uniphier-denali-nand-v5a"
8, 16 for "socionext,uniphier-denali-nand-v5b"
- nand-ecc-maximize: see nand.txt for details
- nand-ecc-maximize: see nand-controller.yaml for details

The chip nodes may optionally contain sub-nodes describing partitions of the
address space. See partition.txt for more detail.
Expand Down
6 changes: 3 additions & 3 deletions Documentation/devicetree/bindings/mtd/fsmc-nand.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -30,9 +30,9 @@ Optional properties:
command is asserted. Zero means one cycle, 255 means 256
cycles.
- bank: default NAND bank to use (0-3 are valid, 0 is the default).
- nand-ecc-mode : see nand.txt
- nand-ecc-strength : see nand.txt
- nand-ecc-step-size : see nand.txt
- nand-ecc-mode : see nand-controller.yaml
- nand-ecc-strength : see nand-controller.yaml
- nand-ecc-step-size : see nand-controller.yaml

Can support 1-bit HW ECC (default) or if stronger correction is required,
software-based BCH.
Expand Down
2 changes: 1 addition & 1 deletion Documentation/devicetree/bindings/mtd/gpmc-nand.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -8,7 +8,7 @@ explained in a separate documents - please refer to
Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt

For NAND specific properties such as ECC modes or bus width, please refer to
Documentation/devicetree/bindings/mtd/nand.txt
Documentation/devicetree/bindings/mtd/nand-controller.yaml


Required properties:
Expand Down
2 changes: 1 addition & 1 deletion Documentation/devicetree/bindings/mtd/hisi504-nand.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -7,7 +7,7 @@ Required properties:
NAND controller's registers. The second contains base
physical address and size of NAND controller's buffer.
- interrupts: Interrupt number for nfc.
- nand-bus-width: See nand.txt.
- nand-bus-width: See nand-controller.yaml.
- nand-ecc-mode: Support none and hw ecc mode.
- #address-cells: Partition address, should be set 1.
- #size-cells: Partition size, should be set 1.
Expand Down
Loading

0 comments on commit 0154ec7

Please sign in to comment.