arch: mm: rename FORCE_MAX_ZONEORDER to ARCH_FORCE_MAX_ORDER

This Kconfig option is used by individual arch to set its desired MAX_ORDER. Rename it to reflect its actual use. Link: https://lkml.kernel.org/r/[email protected] Acked-by: Mike Rapoport <[email protected]> Signed-off-by: Zi Yan <[email protected]> Acked-by: Guo Ren <[email protected]> [csky] Acked-by: Arnd Bergmann <[email protected]> Acked-by: Catalin Marinas <[email protected]> [arm64] Acked-by: Huacai Chen <[email protected]> [LoongArch] Acked-by: Michael Ellerman <[email protected]> [powerpc] Cc: Vineet Gupta <[email protected]> Cc: Taichi Sugaya <[email protected]> Cc: Neil Armstrong <[email protected]> Cc: Qin Jian <[email protected]> Cc: Guo Ren <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Dinh Nguyen <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Ley Foon Tan <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
josf · Sep 12, 2022 · 0192445 · 0192445
1 parent 46e8715
commit 0192445
Show file tree

Hide file tree

Showing 24 changed files with 27 additions and 27 deletions.
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
@@ -554,7 +554,7 @@ config ARC_BUILTIN_DTB_NAME
 
 endmenu	 # "ARC Architecture Configuration"
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	default "12" if ARC_HUGEPAGE_16M
 	default "11"

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
@@ -1434,7 +1434,7 @@ config ARM_MODULE_PLTS
 	  Disabling this is usually safe for small single-platform
 	  configurations. If unsure, say y.
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	default "12" if SOC_AM33XX
 	default "9" if SA1111

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
@@ -31,7 +31,7 @@ CONFIG_SOC_VF610=y
 CONFIG_SMP=y
 CONFIG_ARM_PSCI=y
 CONFIG_HIGHMEM=y
-CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_ARCH_FORCE_MAX_ORDER=14
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y

diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig
@@ -26,7 +26,7 @@ CONFIG_THUMB2_KERNEL=y
 # CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11 is not set
 # CONFIG_ARM_PATCH_IDIV is not set
 CONFIG_HIGHMEM=y
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=12
 CONFIG_SECCOMP=y
 CONFIG_KEXEC=y
 CONFIG_EFI=y

diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig
@@ -12,7 +12,7 @@ CONFIG_ARCH_OXNAS=y
 CONFIG_MACH_OX820=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=12
 CONFIG_SECCOMP=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y

diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
@@ -21,7 +21,7 @@ CONFIG_MACH_AKITA=y
 CONFIG_MACH_BORZOI=y
 CONFIG_PXA_SYSTEMS_CPLDS=y
 CONFIG_AEABI=y
-CONFIG_FORCE_MAX_ZONEORDER=9
+CONFIG_ARCH_FORCE_MAX_ORDER=9
 CONFIG_CMDLINE="root=/dev/ram0 ro"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y

diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
@@ -19,7 +19,7 @@ CONFIG_ATMEL_CLOCKSOURCE_TCB=y
 # CONFIG_CACHE_L2X0 is not set
 # CONFIG_ARM_PATCH_IDIV is not set
 # CONFIG_CPU_SW_DOMAIN_PAN is not set
-CONFIG_FORCE_MAX_ZONEORDER=15
+CONFIG_ARCH_FORCE_MAX_ORDER=15
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
 CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk ignore_loglevel"

diff --git a/arch/arm/configs/sp7021_defconfig b/arch/arm/configs/sp7021_defconfig
@@ -18,7 +18,7 @@ CONFIG_ARCH_SUNPLUS=y
 # CONFIG_VDSO is not set
 CONFIG_SMP=y
 CONFIG_THUMB2_KERNEL=y
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=12
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_MODULES=y

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
@@ -1418,7 +1418,7 @@ config XEN
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64.
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int
 	default "14" if ARM64_64K_PAGES
 	default "12" if ARM64_16K_PAGES

diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
@@ -332,7 +332,7 @@ config HIGHMEM
 	select KMAP_LOCAL
 	default y
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	default "11"
 

diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
@@ -200,7 +200,7 @@ config IA64_CYCLONE
 	  Say Y here to enable support for IBM EXA Cyclone time source.
 	  If you're unsure, answer N.
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "MAX_ORDER (11 - 17)"  if !HUGETLB_PAGE
 	range 11 17  if !HUGETLB_PAGE
 	default "17" if HUGETLB_PAGE

diff --git a/arch/ia64/include/asm/sparsemem.h b/arch/ia64/include/asm/sparsemem.h
@@ -11,10 +11,10 @@
 
 #define SECTION_SIZE_BITS	(30)
 #define MAX_PHYSMEM_BITS	(50)
-#ifdef CONFIG_FORCE_MAX_ZONEORDER
-#if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
+#ifdef CONFIG_ARCH_FORCE_MAX_ORDER
+#if ((CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
 #undef SECTION_SIZE_BITS
-#define SECTION_SIZE_BITS (CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT)
+#define SECTION_SIZE_BITS (CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT)
 #endif
 #endif
 

diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
@@ -370,7 +370,7 @@ config NODES_SHIFT
 	default "6"
 	depends on NUMA
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	range 14 64 if PAGE_SIZE_64KB
 	default "14" if PAGE_SIZE_64KB

diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
@@ -399,7 +399,7 @@ config SINGLE_MEMORY_CHUNK
 	  order" to save memory that could be wasted for unused memory map.
 	  Say N if not sure.
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order" if ADVANCED
 	depends on !SINGLE_MEMORY_CHUNK
 	default "11"

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
@@ -2140,7 +2140,7 @@ config PAGE_SIZE_64KB
 
 endchoice
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	range 14 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
 	default "14" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB

diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
@@ -44,7 +44,7 @@ menu "Kernel features"
 
 source "kernel/Kconfig.hz"
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	range 9 20
 	default "11"

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
@@ -845,7 +845,7 @@ config DATA_SHIFT
 	  in that case. If PIN_TLB is selected, it must be aligned to 8M as
 	  8M pages will be pinned.
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	range 8 9 if PPC64 && PPC_64K_PAGES
 	default "9" if PPC64 && PPC_64K_PAGES

diff --git a/arch/powerpc/configs/85xx/ge_imp3a_defconfig b/arch/powerpc/configs/85xx/ge_imp3a_defconfig
@@ -30,7 +30,7 @@ CONFIG_PREEMPT=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-CONFIG_FORCE_MAX_ZONEORDER=17
+CONFIG_ARCH_FORCE_MAX_ORDER=17
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_MSI=y

diff --git a/arch/powerpc/configs/fsl-emb-nonhw.config b/arch/powerpc/configs/fsl-emb-nonhw.config
@@ -41,7 +41,7 @@ CONFIG_FIXED_PHY=y
 CONFIG_FONT_8x16=y
 CONFIG_FONT_8x8=y
 CONFIG_FONTS=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_ARCH_FORCE_MAX_ORDER=13
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAME_WARN=1024
 CONFIG_FTL=y

diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
@@ -8,7 +8,7 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=12
 CONFIG_MEMORY_SIZE=0x10000000
 CONFIG_FLATMEM_MANUAL=y
 CONFIG_SH_ECOVEC=y

diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
@@ -18,7 +18,7 @@ config PAGE_OFFSET
 	default "0x80000000" if MMU
 	default "0x00000000"
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	range 9 64 if PAGE_SIZE_16KB
 	default "9" if PAGE_SIZE_16KB

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
@@ -269,7 +269,7 @@ config ARCH_SPARSEMEM_ENABLE
 config ARCH_SPARSEMEM_DEFAULT
 	def_bool y if SPARC64
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	default "13"
 	help

diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
@@ -771,7 +771,7 @@ config HIGHMEM
 
 	  If unsure, say Y.
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	default "11"
 	help

diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
@@ -24,10 +24,10 @@
 #include <asm/page.h>
 
 /* Free memory management - zoned buddy allocator.  */
-#ifndef CONFIG_FORCE_MAX_ZONEORDER
+#ifndef CONFIG_ARCH_FORCE_MAX_ORDER
 #define MAX_ORDER 11
 #else
-#define MAX_ORDER CONFIG_FORCE_MAX_ZONEORDER
+#define MAX_ORDER CONFIG_ARCH_FORCE_MAX_ORDER
 #endif
 #define MAX_ORDER_NR_PAGES (1 << (MAX_ORDER - 1))