Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

 1) Sanity check URB networking device parameters to avoid divide by
    zero, from Oliver Neukum.

 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
    don't work properly. Longer term this needs a better fix tho. From
    Vijay Khemka.

 3) Small fixes to selftests (use ping when ping6 is not present, etc.)
    from David Ahern.

 4) Bring back rt_uses_gateway member of struct rtable, it's semantics
    were not well understood and trying to remove it broke things. From
    David Ahern.

 5) Move usbnet snaity checking, ignore endpoints with invalid
    wMaxPacketSize. From Bjørn Mork.

 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.

 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
    Alex Vesker, and Yevgeny Kliteynik

 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.

 9) Fix crash when removing sch_cbs entry while offloading is enabled,
    from Vinicius Costa Gomes.

10) Signedness bug fixes, generally in looking at the result given by
    of_get_phy_mode() and friends. From Dan Crapenter.

11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.

12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.

13) Fix quantization code in tcp_bbr, from Kevin Yang.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
  net: tap: clean up an indentation issue
  nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
  tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
  sk_buff: drop all skb extensions on free and skb scrubbing
  tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
  mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
  Documentation: Clarify trap's description
  mlxsw: spectrum: Clear VLAN filters during port initialization
  net: ena: clean up indentation issue
  NFC: st95hf: clean up indentation issue
  net: phy: micrel: add Asym Pause workaround for KSZ9021
  net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
  ptp: correctly disable flags on old ioctls
  lib: dimlib: fix help text typos
  net: dsa: microchip: Always set regmap stride to 1
  nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
  nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
  net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
  vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
  net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
  ...

Documentation/devicetree/bindings/net/adi,adin.yaml

@@ -36,12 +36,6 @@ properties:
     enum: [ 4, 8, 12, 16, 20, 24 ]
     default: 8
 
-  adi,disable-energy-detect:
-    description: |
-      Disables Energy Detect Powerdown Mode (default disabled, i.e energy detect
-      is enabled if this property is unspecified)
-    type: boolean
-
 examples:
   - |
     ethernet {
@@ -68,6 +62,5 @@ examples:
             reg = <1>;
 
             adi,fifo-depth-bits = <16>;
-            adi,disable-energy-detect;
         };
     };

Documentation/devicetree/bindings/net/micrel-ksz90x1.txt

@@ -12,8 +12,36 @@ and therefore may overwrite them.
 KSZ9021:
 
   All skew control options are specified in picoseconds. The minimum
-  value is 0, the maximum value is 3000, and it is incremented by 200ps
-  steps.
+  value is 0, the maximum value is 3000, and it can be specified in 200ps
+  steps, *but* these values are in not fact what you get because this chip's
+  skew values actually increase in 120ps steps, starting from -840ps. The
+  incorrect values came from an error in the original KSZ9021 datasheet
+  before it was corrected in revision 1.2 (Feb 2014), but it is too late to
+  change the driver now because of the many existing device trees that have
+  been created using values that go up in increments of 200.
+
+  The following table shows the actual skew delay you will get for each of the
+  possible devicetree values, and the number that will be programmed into the
+  corresponding pad skew register:
+
+  Device Tree Value	Delay	Pad Skew Register Value
+  -----------------------------------------------------
+	0   		-840ps		0000
+	200 		-720ps		0001
+	400 		-600ps		0010
+	600 		-480ps		0011
+	800 		-360ps		0100
+	1000		-240ps		0101
+	1200		-120ps		0110
+	1400		   0ps		0111
+	1600		 120ps		1000
+	1800		 240ps		1001
+	2000		 360ps		1010
+	2200		 480ps		1011
+	2400		 600ps		1100
+	2600		 720ps		1101
+	2800		 840ps		1110
+	3000		 960ps		1111
 
   Optional properties:
 

Documentation/devicetree/bindings/net/renesas,ravb.txt

@@ -18,6 +18,7 @@ Required properties:
 		R-Car Gen2 and RZ/G1 devices.
 
       - "renesas,etheravb-r8a774a1" for the R8A774A1 SoC.
+      - "renesas,etheravb-r8a774b1" for the R8A774B1 SoC.
       - "renesas,etheravb-r8a774c0" for the R8A774C0 SoC.
       - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
       - "renesas,etheravb-r8a7796" for the R8A7796 SoC.

Documentation/devicetree/bindings/net/snps,dwmac.yaml

@@ -113,7 +113,7 @@ properties:
     const: stmmaceth
 
   mac-mode:
-    maxItems: 1
+    $ref: ethernet-controller.yaml#/properties/phy-connection-type
     description:
       The property is identical to 'phy-mode', and assumes that there is mode
       converter in-between the MAC & PHY (e.g. GMII-to-RGMII). This converter

Documentation/networking/devlink-trap.rst

@@ -143,7 +143,8 @@ be added to the following table:
    * - ``port_list_is_empty``
      - ``drop``
      - Traps packets that the device decided to drop in case they need to be
-       flooded and the flood list is empty
+       flooded (e.g., unknown unicast, unregistered multicast) and there are
+       no ports the packets should be flooded to
    * - ``port_loopback_filter``
      - ``drop``
      - Traps packets that the device decided to drop in case after layer 2

MAINTAINERS

@@ -643,6 +643,7 @@ F:	drivers/net/ethernet/alacritech/*
 
 FORCEDETH GIGABIT ETHERNET DRIVER
 M:	Rain River <[email protected]>
+M:	Zhu Yanjun <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	drivers/net/ethernet/nvidia/*

drivers/atm/he.c

@@ -1690,7 +1690,7 @@ he_service_rbrq(struct he_dev *he_dev, int group)
 
 		if (RBRQ_HBUF_ERR(he_dev->rbrq_head)) {
 			hprintk("HBUF_ERR!  (cid 0x%x)\n", cid);
-				atomic_inc(&vcc->stats->rx_drop);
+			atomic_inc(&vcc->stats->rx_drop);
 			goto return_host_buffers;
 		}
 

drivers/infiniband/core/addr.c

@@ -352,7 +352,7 @@ static bool has_gateway(const struct dst_entry *dst, sa_family_t family)
 
 	if (family == AF_INET) {
 		rt = container_of(dst, struct rtable, dst);
-		return rt->rt_gw_family == AF_INET;
+		return rt->rt_uses_gateway;
 	}
 
 	rt6 = container_of(dst, struct rt6_info, dst);

drivers/isdn/mISDN/socket.c

@@ -754,6 +754,8 @@ base_sock_create(struct net *net, struct socket *sock, int protocol, int kern)
 
 	if (sock->type != SOCK_RAW)
 		return -ESOCKTNOSUPPORT;
+	if (!capable(CAP_NET_RAW))
+		return -EPERM;
 
 	sk = sk_alloc(net, PF_ISDN, GFP_KERNEL, &mISDN_proto, kern);
 	if (!sk)

drivers/net/Kconfig

@@ -487,7 +487,7 @@ config FUJITSU_ES
 	depends on ACPI
 	help
 	  This driver provides support for Extended Socket network device
-          on Extended Partitioning of FUJITSU PRIMEQUEST 2000 E2 series.
+	  on Extended Partitioning of FUJITSU PRIMEQUEST 2000 E2 series.
 
 config THUNDERBOLT_NET
 	tristate "Networking over Thunderbolt cable"

drivers/net/arcnet/Kconfig

@@ -56,19 +56,19 @@ config ARCNET_CAP
 	tristate "Enable CAP mode packet interface"
 	help
 	  ARCnet "cap mode" packet encapsulation. Used to get the hardware
-          acknowledge back to userspace. After the initial protocol byte every
-          packet is stuffed with an extra 4 byte "cookie" which doesn't
-          actually appear on the network. After transmit the driver will send
-          back a packet with protocol byte 0 containing the status of the
-          transmission:
-             0=no hardware acknowledge
-             1=excessive nak
-             2=transmission accepted by the receiver hardware
-
-          Received packets are also stuffed with the extra 4 bytes but it will
-          be random data.
-
-          Cap only listens to protocol 1-8.
+	  acknowledge back to userspace. After the initial protocol byte every
+	  packet is stuffed with an extra 4 byte "cookie" which doesn't
+	  actually appear on the network. After transmit the driver will send
+	  back a packet with protocol byte 0 containing the status of the
+	  transmission:
+	     0=no hardware acknowledge
+	     1=excessive nak
+	     2=transmission accepted by the receiver hardware
+
+	  Received packets are also stuffed with the extra 4 bytes but it will
+	  be random data.
+
+	  Cap only listens to protocol 1-8.
 
 config ARCNET_COM90xx
 	tristate "ARCnet COM90xx (normal) chipset driver"

drivers/net/arcnet/arcnet.c

@@ -1063,31 +1063,34 @@ EXPORT_SYMBOL(arcnet_interrupt);
 static void arcnet_rx(struct net_device *dev, int bufnum)
 {
 	struct arcnet_local *lp = netdev_priv(dev);
-	struct archdr pkt;
+	union {
+		struct archdr pkt;
+		char buf[512];
+	} rxdata;
 	struct arc_rfc1201 *soft;
 	int length, ofs;
 
-	soft = &pkt.soft.rfc1201;
+	soft = &rxdata.pkt.soft.rfc1201;
 
-	lp->hw.copy_from_card(dev, bufnum, 0, &pkt, ARC_HDR_SIZE);
-	if (pkt.hard.offset[0]) {
-		ofs = pkt.hard.offset[0];
+	lp->hw.copy_from_card(dev, bufnum, 0, &rxdata.pkt, ARC_HDR_SIZE);
+	if (rxdata.pkt.hard.offset[0]) {
+		ofs = rxdata.pkt.hard.offset[0];
 		length = 256 - ofs;
 	} else {
-		ofs = pkt.hard.offset[1];
+		ofs = rxdata.pkt.hard.offset[1];
 		length = 512 - ofs;
 	}
 
 	/* get the full header, if possible */
-	if (sizeof(pkt.soft) <= length) {
-		lp->hw.copy_from_card(dev, bufnum, ofs, soft, sizeof(pkt.soft));
+	if (sizeof(rxdata.pkt.soft) <= length) {
+		lp->hw.copy_from_card(dev, bufnum, ofs, soft, sizeof(rxdata.pkt.soft));
 	} else {
-		memset(&pkt.soft, 0, sizeof(pkt.soft));
+		memset(&rxdata.pkt.soft, 0, sizeof(rxdata.pkt.soft));
 		lp->hw.copy_from_card(dev, bufnum, ofs, soft, length);
 	}
 
 	arc_printk(D_DURING, dev, "Buffer #%d: received packet from %02Xh to %02Xh (%d+4 bytes)\n",
-		   bufnum, pkt.hard.source, pkt.hard.dest, length);
+		   bufnum, rxdata.pkt.hard.source, rxdata.pkt.hard.dest, length);
 
 	dev->stats.rx_packets++;
 	dev->stats.rx_bytes += length + ARC_HDR_SIZE;
@@ -1096,13 +1099,13 @@ static void arcnet_rx(struct net_device *dev, int bufnum)
 	if (arc_proto_map[soft->proto]->is_ip) {
 		if (BUGLVL(D_PROTO)) {
 			struct ArcProto
-			*oldp = arc_proto_map[lp->default_proto[pkt.hard.source]],
+			*oldp = arc_proto_map[lp->default_proto[rxdata.pkt.hard.source]],
 			*newp = arc_proto_map[soft->proto];
 
 			if (oldp != newp) {
 				arc_printk(D_PROTO, dev,
 					   "got protocol %02Xh; encap for host %02Xh is now '%c' (was '%c')\n",
-					   soft->proto, pkt.hard.source,
+					   soft->proto, rxdata.pkt.hard.source,
 					   newp->suffix, oldp->suffix);
 			}
 		}
@@ -1111,10 +1114,10 @@ static void arcnet_rx(struct net_device *dev, int bufnum)
 		lp->default_proto[0] = soft->proto;
 
 		/* in striking contrast, the following isn't a hack. */
-		lp->default_proto[pkt.hard.source] = soft->proto;
+		lp->default_proto[rxdata.pkt.hard.source] = soft->proto;
 	}
 	/* call the protocol-specific receiver. */
-	arc_proto_map[soft->proto]->rx(dev, bufnum, &pkt, length);
+	arc_proto_map[soft->proto]->rx(dev, bufnum, &rxdata.pkt, length);
 }
 
 static void null_rx(struct net_device *dev, int bufnum,

drivers/net/can/usb/Kconfig

@@ -15,10 +15,10 @@ config CAN_EMS_USB
 	  from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
 
 config CAN_ESD_USB2
-        tristate "ESD USB/2 CAN/USB interface"
-        ---help---
-          This driver supports the CAN-USB/2 interface
-          from esd electronic system design gmbh (http://www.esd.eu).
+	tristate "ESD USB/2 CAN/USB interface"
+	---help---
+	  This driver supports the CAN-USB/2 interface
+	  from esd electronic system design gmbh (http://www.esd.eu).
 
 config CAN_GS_USB
 	tristate "Geschwister Schneider UG interfaces"

drivers/net/dsa/b53/b53_serdes.h

@@ -1,5 +1,5 @@
-/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause
- *
+/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */
+/*
  * Northstar Plus switch SerDes/SGMII PHY definitions
  *
  * Copyright (C) 2018 Florian Fainelli <[email protected]>

drivers/net/dsa/lantiq_pce.h

@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * PCE microcode extracted from UGW 7.1.1 switch api
  *

drivers/net/dsa/microchip/ksz_common.h

@@ -303,7 +303,7 @@ static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset,
 	{								\
 		.name = #width,						\
 		.val_bits = (width),					\
-		.reg_stride = (width) / 8,				\
+		.reg_stride = 1,					\
 		.reg_bits = (regbits) + (regalign),			\
 		.pad_bits = (regpad),					\
 		.max_register = BIT(regbits) - 1,			\

drivers/net/dsa/qca8k.c

@@ -936,6 +936,9 @@ qca8k_port_enable(struct dsa_switch *ds, int port,
 {
 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
 
+	if (!dsa_is_user_port(ds, port))
+		return 0;
+
 	qca8k_port_set_status(priv, port, 1);
 	priv->port_sts[port].enabled = 1;
 

drivers/net/dsa/sja1105/Kconfig

@@ -27,6 +27,7 @@ config NET_DSA_SJA1105_PTP
 config NET_DSA_SJA1105_TAS
 	bool "Support for the Time-Aware Scheduler on NXP SJA1105"
 	depends on NET_DSA_SJA1105
+	depends on NET_SCH_TAPRIO
 	help
 	  This enables support for the TTEthernet-based egress scheduling
 	  engine in the SJA1105 DSA driver, which is controlled using a

drivers/net/ethernet/Kconfig

@@ -140,17 +140,6 @@ source "drivers/net/ethernet/neterion/Kconfig"
 source "drivers/net/ethernet/netronome/Kconfig"
 source "drivers/net/ethernet/ni/Kconfig"
 source "drivers/net/ethernet/8390/Kconfig"
-
-config NET_NETX
-	tristate "NetX Ethernet support"
-	select MII
-	depends on ARCH_NETX
-	---help---
-	  This is support for the Hilscher netX builtin Ethernet ports
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called netx-eth.
-
 source "drivers/net/ethernet/nvidia/Kconfig"
 source "drivers/net/ethernet/nxp/Kconfig"
 source "drivers/net/ethernet/oki-semi/Kconfig"

drivers/net/ethernet/Makefile

@@ -64,7 +64,6 @@ obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
 obj-$(CONFIG_NET_VENDOR_NETERION) += neterion/
 obj-$(CONFIG_NET_VENDOR_NETRONOME) += netronome/
 obj-$(CONFIG_NET_VENDOR_NI) += ni/
-obj-$(CONFIG_NET_NETX) += netx-eth.o
 obj-$(CONFIG_NET_VENDOR_NVIDIA) += nvidia/
 obj-$(CONFIG_LPC_ENET) += nxp/
 obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/

drivers/net/ethernet/allwinner/Kconfig

@@ -21,17 +21,17 @@ config NET_VENDOR_ALLWINNER
 if NET_VENDOR_ALLWINNER
 
 config SUN4I_EMAC
-        tristate "Allwinner A10 EMAC support"
+	tristate "Allwinner A10 EMAC support"
 	depends on ARCH_SUNXI
 	depends on OF
 	select CRC32
 	select MII
 	select PHYLIB
 	select MDIO_SUN4I
-        ---help---
-          Support for Allwinner A10 EMAC ethernet driver.
+	---help---
+	  Support for Allwinner A10 EMAC ethernet driver.
 
-          To compile this driver as a module, choose M here.  The module
-          will be called sun4i-emac.
+	  To compile this driver as a module, choose M here.  The module
+	  will be called sun4i-emac.
 
 endif # NET_VENDOR_ALLWINNER

drivers/net/ethernet/amazon/Kconfig

@@ -19,6 +19,7 @@ if NET_VENDOR_AMAZON
 config ENA_ETHERNET
 	tristate "Elastic Network Adapter (ENA) support"
 	depends on PCI_MSI && !CPU_BIG_ENDIAN
+	select DIMLIB
 	---help---
 	  This driver supports Elastic Network Adapter (ENA)"
 

drivers/net/ethernet/amazon/ena/ena_eth_com.c

@@ -211,8 +211,8 @@ static int ena_com_sq_update_llq_tail(struct ena_com_io_sq *io_sq)
 
 		pkt_ctrl->curr_bounce_buf =
 			ena_com_get_next_bounce_buffer(&io_sq->bounce_buf_ctrl);
-			memset(io_sq->llq_buf_ctrl.curr_bounce_buf,
-			       0x0, llq_info->desc_list_entry_size);
+		memset(io_sq->llq_buf_ctrl.curr_bounce_buf,
+		       0x0, llq_info->desc_list_entry_size);
 
 		pkt_ctrl->idx = 0;
 		if (unlikely(llq_info->desc_stride_ctrl == ENA_ADMIN_SINGLE_DESC_PER_ENTRY))

drivers/net/ethernet/aquantia/atlantic/aq_vec.c

@@ -306,27 +306,24 @@ irqreturn_t aq_vec_isr_legacy(int irq, void *private)
 {
 	struct aq_vec_s *self = private;
 	u64 irq_mask = 0U;
-	irqreturn_t err = 0;
+	int err;
 
-	if (!self) {
-		err = -EINVAL;
-		goto err_exit;
-	}
+	if (!self)
+		return IRQ_NONE;
 	err = self->aq_hw_ops->hw_irq_read(self->aq_hw, &irq_mask);
 	if (err < 0)
-		goto err_exit;
+		return IRQ_NONE;
 
 	if (irq_mask) {
 		self->aq_hw_ops->hw_irq_disable(self->aq_hw,
 			      1U << self->aq_ring_param.vec_idx);
 		napi_schedule(&self->napi);
 	} else {
 		self->aq_hw_ops->hw_irq_enable(self->aq_hw, 1U);
-		err = IRQ_NONE;
+		return IRQ_NONE;
 	}
 
-err_exit:
-	return err >= 0 ? IRQ_HANDLED : IRQ_NONE;
+	return IRQ_HANDLED;
 }
 
 cpumask_t *aq_vec_get_affinity_mask(struct aq_vec_s *self)