r8152: remove clearing bp

The xxx_clear_bp() is used to halt the firmware. It only necessary for updating the new firmware. Besides, depend on the version of the current firmware, it may have problem to halt the firmware directly. Finally, halt the firmware would let the firmware code useless, and the bugs which are fixed by the firmware would occur. Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
josf · Oct 1, 2014 · 204c870 · 204c870
1 parent 1b0ecb2
commit 204c870
Showing 1 changed file with 1 addition and 27 deletions.
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
@@ -24,7 +24,7 @@
 #include <net/ip6_checksum.h>
 
 /* Version Information */
-#define DRIVER_VERSION "v1.06.0 (2014/03/03)"
+#define DRIVER_VERSION "v1.06.1 (2014/10/01)"
 #define DRIVER_AUTHOR "Realtek linux nic maintainers <[email protected]>"
 #define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
 #define MODULENAME "r8152"
@@ -2201,28 +2201,6 @@ static void rtl_phy_reset(struct r8152 *tp)
 	}
 }
 
-static void rtl_clear_bp(struct r8152 *tp)
-{
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0);
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_2, 0);
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_4, 0);
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_6, 0);
-	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_0, 0);
-	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_2, 0);
-	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_4, 0);
-	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_6, 0);
-	mdelay(3);
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_BA, 0);
-	ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0);
-}
-
-static void r8153_clear_bp(struct r8152 *tp)
-{
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
-	ocp_write_byte(tp, MCU_TYPE_USB, USB_BP_EN, 0);
-	rtl_clear_bp(tp);
-}
-
 static void r8153_teredo_off(struct r8152 *tp)
 {
 	u32 ocp_data;
@@ -2265,8 +2243,6 @@ static void r8152b_hw_phy_cfg(struct r8152 *tp)
 		r8152_mdio_write(tp, MII_BMCR, data);
 	}
 
-	rtl_clear_bp(tp);
-
 	set_bit(PHY_RESET, &tp->flags);
 }
 
@@ -2417,8 +2393,6 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
 		r8152_mdio_write(tp, MII_BMCR, data);
 	}
 
-	r8153_clear_bp(tp);
-
 	if (tp->version == RTL_VER_03) {
 		data = ocp_reg_read(tp, OCP_EEE_CFG);
 		data &= ~CTAP_SHORT_EN;