Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: - a couple of OMAP 4.11 regression fixes, including a boot regression for SmartReflex, hypervisor mode in thumb2 mode, and reference counting of device nodes - a fix for cpu_idle on at91 - minor DT fixes on across several platforms: sunxi, bcm53xx, at91, nsp, ns2, ux500, omap - a fix to correct an API change in the reset controllers * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) arm64: dts: NS2: Add dma-coherent to relevant DT entries reset: fix optional reset_control_get stubs to return NULL ARM: sun8i: a23/a33: drop bl_en_pin GPIO pinmux in reference design DTSI ARM: dts: sun7i: lamobo-r1: Fix CPU port RGMII settings ARM: dts: NSP: GPIO reboot open-source ARM: at91: pm: cpu_idle: switch DDR to power-down mode ARM: dts: add the AB8500 clocks to the device tree ARM: dts: imx6sx-udoo-neo: Fix reboot hang ARM: sun8i: Fix the mali clock rate ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags ARM: dts: BCM5301X: Fix memory start address ARM: dts: BCM5301X: Fix UARTs on bcm953012k Revert "ARM: at91/dt: sama5d2: Use new compatible for ohci node" ARM: OMAP2+: Release device node after it is no longer needed. ARM: OMAP2+: Fix device node reference counts ARM: OMAP2+: Remove legacy gpmc-nand.c ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure ARM: dts: am335x-pcm953: Fix legacy wakeup source binding ARM: omap2plus_defconfig: Enable INPUT_MOUSEDEV as loadable modules ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI ...
josf · Mar 24, 2017 · 2056b7c · 2056b7c
2 parents 42ea16f + 0fa974b
commit 2056b7c
Show file tree

Hide file tree

Showing 30 changed files with 122 additions and 241 deletions.
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -63,14 +63,14 @@
 			label = "home";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		button@1 {
 			label = "menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 	};

diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -315,6 +315,13 @@
 			/* ID & VBUS GPIOs provided in board dts */
 		};
 	};
+
+	tpic2810: tpic2810@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
 
 &mcspi3 {
@@ -330,13 +337,6 @@
 		spi-max-frequency = <1000000>;
 		spi-cpol;
 	};
-
-	tpic2810: tpic2810@60 {
-		compatible = "ti,tpic2810";
-		reg = <0x60>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
 };
 
 &uart3 {

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -66,14 +66,14 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 
 		local-timer@20600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x20600 0x100>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 

diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
@@ -48,15 +48,14 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x10000000>;
+		reg = <0x80000000 0x10000000>;
 	};
 };
 
 &uart0 {
-	clock-frequency = <62499840>;
+	status = "okay";
 };
 
 &uart1 {
-	clock-frequency = <62499840>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 31 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -121,11 +121,6 @@
 	};
 };
 
-&cpu0 {
-	arm-supply = <&sw1a_reg>;
-	soc-supply = <&sw1c_reg>;
-};
-
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;

diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
@@ -266,7 +266,7 @@
 		};
 
 		usb1: ohci@00400000 {
-			compatible = "atmel,sama5d2-ohci", "usb-ohci";
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00400000 0x100000>;
 			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
 			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/mfd/dbx500-prcmu.h>
 #include <dt-bindings/arm/ux500_pm_domains.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ste-ab8500.h>
 #include "skeleton.dtsi"
 
 / {
@@ -603,6 +604,11 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 
+				ab8500_clock: clock-controller {
+					compatible = "stericsson,ab8500-clk";
+					#clock-cells = <1>;
+				};
+
 				ab8500_gpio: ab8500-gpio {
 					compatible = "stericsson,ab8500-gpio";
 					gpio-controller;
@@ -686,6 +692,8 @@
 
 				ab8500-pwm {
 					compatible = "stericsson,ab8500-pwm";
+					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+					clock-names = "intclk";
 				};
 
 				ab8500-debugfs {
@@ -700,6 +708,9 @@
 					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
 					V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
 
+					clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>;
+					clock-names = "audioclk";
+
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
@@ -1095,6 +1106,14 @@
 			status = "disabled";
 		};
 
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+			stericsson,cpu-dai = <&msp1 &msp3>;
+			stericsson,audio-codec = <&codec>;
+			clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>;
+			clock-names = "sysclk", "ulpclk", "intclk";
+		};
+
 		msp0: msp@80123000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80123000 0x1000>;

diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
@@ -186,15 +186,6 @@
 			status = "okay";
 		};
 
-		sound {
-			compatible = "stericsson,snd-soc-mop500";
-
-			stericsson,cpu-dai = <&msp1 &msp3>;
-			stericsson,audio-codec = <&codec>;
-			clocks = <&prcmu_clk PRCMU_SYSCLK>;
-			clock-names = "sysclk";
-		};
-
 		msp0: msp@80123000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msp0_default_mode>;

diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
@@ -159,15 +159,6 @@
 				     "", "", "", "", "", "", "", "";
 		};
 
-		sound {
-			compatible = "stericsson,snd-soc-mop500";
-
-			stericsson,cpu-dai = <&msp1 &msp3>;
-			stericsson,audio-codec = <&codec>;
-			clocks = <&prcmu_clk PRCMU_SYSCLK>;
-			clock-names = "sysclk";
-		};
-
 		msp0: msp@80123000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msp0_default_mode>;

diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -167,7 +167,7 @@
 					reg = <8>;
 					label = "cpu";
 					ethernet = <&gmac>;
-					phy-mode = "rgmii";
+					phy-mode = "rgmii-txid";
 					fixed-link {
 						speed = <1000>;
 						full-duplex;

diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -495,7 +495,7 @@
 			resets = <&ccu RST_BUS_GPU>;
 
 			assigned-clocks = <&ccu CLK_GPU>;
-			assigned-clock-rates = <408000000>;
+			assigned-clock-rates = <384000000>;
 		};
 
 		gic: interrupt-controller@01c81000 {

diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -50,8 +50,6 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en_pin>;
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
@@ -93,11 +91,6 @@
 };
 
 &pio {
-	bl_en_pin: bl_en_pin@0 {
-		pins = "PH6";
-		function = "gpio_in";
-	};
-
 	mmc0_cd_pin: mmc0_cd_pin@0 {
 		pins = "PB4";
 		function = "gpio_in";

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
@@ -188,6 +188,7 @@ CONFIG_WL12XX=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE_SPI=m
 CONFIG_WLCORE_SDIO=m
+CONFIG_INPUT_MOUSEDEV=m
 CONFIG_INPUT_JOYDEV=m
 CONFIG_INPUT_EVDEV=m
 CONFIG_KEYBOARD_ATKBD=m

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
@@ -289,6 +289,22 @@ static void at91_ddr_standby(void)
 		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
 }
 
+static void sama5d3_ddr_standby(void)
+{
+	u32 lpr0;
+	u32 saved_lpr0;
+
+	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
+	lpr0 |= AT91_DDRSDRC_LPCB_POWER_DOWN;
+
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
+
+	cpu_do_idle();
+
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
+}
+
 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
  * remember.
  */
@@ -323,7 +339,7 @@ static const struct of_device_id const ramc_ids[] __initconst = {
 	{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
 	{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
 	{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
-	{ .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby },
+	{ .compatible = "atmel,sama5d3-ddramc", .data = sama5d3_ddr_standby },
 	{ /*sentinel*/ }
 };
 

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
@@ -241,6 +241,3 @@ obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
-
-nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
-obj-y					+= $(nand-m) $(nand-y)