Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/ker…

…nel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] kill ata_sg_is_last()
  Update libata driver for bf548 atapi controller against the 2.6.24 tree.
  libata-sff: Correct use of check_status()
  drivers/ata: add support to Freescale 3.0Gbps SATA Controller
  pata_acpi: fix build breakage if !CONFIG_PM

drivers/ata/Kconfig

@@ -182,6 +182,15 @@ config PATA_ACPI
 	  firmware in the BIOS. This driver can sometimes handle
 	  otherwise unsupported hardware.
 
+config SATA_FSL
+	tristate "Freescale 3.0Gbps SATA support"
+	depends on PPC_MPC837x
+	help
+	  This option enables support for Freescale 3.0Gbps SATA controller.
+	  It can be found on MPC837x and MPC8315.
+
+	  If unsure, say N.
+
 config PATA_ALI
 	tristate "ALi PATA support (Experimental)"
 	depends on PCI && EXPERIMENTAL
@@ -641,11 +650,4 @@ config PATA_BF54X
 
 	  If unsure, say N.
 
-config PATA_BF54X_DMA
-	bool "DMA mode"
-	depends on PATA_BF54X
-	default y
-	help
-	  Enable DMA mode for Blackfin ATAPI controller.
-
 endif # ATA

drivers/ata/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_SATA_ULI)		+= sata_uli.o
 obj-$(CONFIG_SATA_MV)		+= sata_mv.o
 obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
 obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
+obj-$(CONFIG_SATA_FSL)		+= sata_fsl.o
 
 obj-$(CONFIG_PATA_ALI)		+= pata_ali.o
 obj-$(CONFIG_PATA_AMD)		+= pata_amd.o

drivers/ata/libata-sff.c

@@ -156,7 +156,7 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 {
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 
-	tf->command = ata_check_status(ap);
+	tf->command = ata_chk_status(ap);
 	tf->feature = ioread8(ioaddr->error_addr);
 	tf->nsect = ioread8(ioaddr->nsect_addr);
 	tf->lbal = ioread8(ioaddr->lbal_addr);

drivers/ata/pata_acpi.c

@@ -370,8 +370,10 @@ static struct pci_driver pacpi_pci_driver = {
 	.id_table		= pacpi_pci_tbl,
 	.probe			= pacpi_init_one,
 	.remove			= ata_pci_remove_one,
+#ifdef CONFIG_PM
 	.suspend		= ata_pci_device_suspend,
 	.resume			= ata_pci_device_resume,
+#endif
 };
 
 static int __init pacpi_init(void)

drivers/ata/pata_bf54x.c

@@ -1092,14 +1092,15 @@ static unsigned int bfin_bus_softreset(struct ata_port *ap,
  *	Note: Original code is ata_std_softreset().
  */
 
-static int bfin_std_softreset(struct ata_port *ap, unsigned int *classes,
+static int bfin_std_softreset(struct ata_link *link, unsigned int *classes,
 		unsigned long deadline)
 {
+	struct ata_port *ap = link->ap;
 	unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
 	unsigned int devmask = 0, err_mask;
 	u8 err;
 
-	if (ata_port_offline(ap)) {
+	if (ata_link_offline(link)) {
 		classes[0] = ATA_DEV_NONE;
 		goto out;
 	}
@@ -1122,9 +1123,11 @@ static int bfin_std_softreset(struct ata_port *ap, unsigned int *classes,
 	}
 
 	/* determine by signature whether we have ATA or ATAPI devices */
-	classes[0] = ata_dev_try_classify(ap, 0, &err);
+	classes[0] = ata_dev_try_classify(&ap->link.device[0],
+				devmask & (1 << 0), &err);
 	if (slave_possible && err != 0x81)
-		classes[1] = ata_dev_try_classify(ap, 1, &err);
+		classes[1] = ata_dev_try_classify(&ap->link.device[1],
+					devmask & (1 << 1), &err);
 
  out:
 	return 0;
@@ -1167,7 +1170,7 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap)
 static void bfin_data_xfer(struct ata_device *adev, unsigned char *buf,
 			   unsigned int buflen, int write_data)
 {
-	struct ata_port *ap = adev->ap;
+	struct ata_port *ap = adev->link->ap;
 	unsigned int words = buflen >> 1;
 	unsigned short *buf16 = (u16 *) buf;
 	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
@@ -1206,7 +1209,10 @@ static void bfin_irq_clear(struct ata_port *ap)
 	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
 
 	pr_debug("in atapi irq clear\n");
-	ATAPI_SET_INT_STATUS(base, 0x1FF);
+
+	ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT
+		| MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT
+		| MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT);
 }
 
 /**
@@ -1233,33 +1239,6 @@ static unsigned char bfin_irq_on(struct ata_port *ap)
 	return tmp;
 }
 
-/**
- *	bfin_irq_ack - Acknowledge a device interrupt.
- *	@ap: Port on which interrupts are enabled.
- *
- *	Note: Original code is ata_irq_ack().
- */
-
-static unsigned char bfin_irq_ack(struct ata_port *ap, unsigned int chk_drq)
-{
-	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
-	unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
-	unsigned char status;
-
-	pr_debug("in atapi irq ack\n");
-	status = ata_busy_wait(ap, bits, 1000);
-	if (status & bits)
-		if (ata_msg_err(ap))
-			dev_err(ap->dev, "abnormal status 0x%X\n", status);
-
-	/* get controller status; clear intr, err bits */
-	ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT
-		| MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT
-		| MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT);
-
-	return bfin_bmdma_status(ap);
-}
-
 /**
  *	bfin_bmdma_freeze - Freeze DMA controller port
  *	@ap: port to freeze
@@ -1308,8 +1287,9 @@ void bfin_bmdma_thaw(struct ata_port *ap)
  *	Note: Original code is ata_std_postreset().
  */
 
-static void bfin_std_postreset(struct ata_port *ap, unsigned int *classes)
+static void bfin_std_postreset(struct ata_link *link, unsigned int *classes)
 {
+	struct ata_port *ap = link->ap;
 	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
 
 	/* re-enable interrupts */
@@ -1395,7 +1375,6 @@ static struct scsi_host_template bfin_sht = {
 };
 
 static const struct ata_port_operations bfin_pata_ops = {
-	.port_disable		= ata_port_disable,
 	.set_piomode		= bfin_set_piomode,
 	.set_dmamode		= bfin_set_dmamode,
 
@@ -1423,7 +1402,6 @@ static const struct ata_port_operations bfin_pata_ops = {
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= bfin_irq_clear,
 	.irq_on			= bfin_irq_on,
-	.irq_ack		= bfin_irq_ack,
 
 	.port_start		= bfin_port_start,
 	.port_stop		= bfin_port_stop,
@@ -1437,11 +1415,7 @@ static struct ata_port_info bfin_port_info[] = {
 				| ATA_FLAG_NO_LEGACY,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0,
-#ifdef CONFIG_PATA_BF54X_DMA
-		.udma_mask	= ATA_UDMA5,
-#else
 		.udma_mask	= 0,
-#endif
 		.port_ops	= &bfin_pata_ops,
 	},
 };
@@ -1607,9 +1581,25 @@ static struct platform_driver bfin_atapi_driver = {
 	},
 };
 
+#define ATAPI_MODE_SIZE		10
+static char bfin_atapi_mode[ATAPI_MODE_SIZE];
+
 static int __init bfin_atapi_init(void)
 {
 	pr_info("register bfin atapi driver\n");
+
+	switch(bfin_atapi_mode[0]) {
+	case 'p':
+	case 'P':
+		break;
+	case 'm':
+	case 'M':
+		bfin_port_info[0].mwdma_mask = ATA_MWDMA2;
+		break;
+	default:
+		bfin_port_info[0].udma_mask = ATA_UDMA5;
+	};
+
 	return platform_driver_register(&bfin_atapi_driver);
 }
 
@@ -1620,6 +1610,13 @@ static void __exit bfin_atapi_exit(void)
 
 module_init(bfin_atapi_init);
 module_exit(bfin_atapi_exit);
+/*
+ * ATAPI mode:
+ * pio/PIO
+ * udma/UDMA (default)
+ * mwdma/MWDMA
+ */
+module_param_string(bfin_atapi_mode, bfin_atapi_mode, ATAPI_MODE_SIZE, 0);
 
 MODULE_AUTHOR("Sonic Zhang <[email protected]>");
 MODULE_DESCRIPTION("PATA driver for blackfin 54x ATAPI controller");

drivers/ata/pdc_adma.c

@@ -318,7 +318,7 @@ static int adma_fill_sg(struct ata_queued_cmd *qc)
 	struct scatterlist *sg;
 	struct ata_port *ap = qc->ap;
 	struct adma_port_priv *pp = ap->private_data;
-	u8  *buf = pp->pkt;
+	u8  *buf = pp->pkt, *last_buf = NULL;
 	int i = (2 + buf[3]) * 8;
 	u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0);
 
@@ -334,8 +334,7 @@ static int adma_fill_sg(struct ata_queued_cmd *qc)
 		*(__le32 *)(buf + i) = cpu_to_le32(len);
 		i += 4;
 
-		if (ata_sg_is_last(sg, qc))
-			pFLAGS |= pEND;
+		last_buf = &buf[i];
 		buf[i++] = pFLAGS;
 		buf[i++] = qc->dev->dma_mode & 0xf;
 		buf[i++] = 0;	/* pPKLW */
@@ -348,6 +347,10 @@ static int adma_fill_sg(struct ata_queued_cmd *qc)
 		VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", i/4,
 					(unsigned long)addr, len);
 	}
+
+	if (likely(last_buf))
+		*last_buf |= pEND;
+
 	return i;
 }