Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
josf · Aug 4, 2010 · 3cfc2c4 · 3cfc2c4
2 parents 5cf6571 + 0ea6e61
commit 3cfc2c4
Show file tree

Hide file tree

Showing 310 changed files with 461 additions and 574 deletions.
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
@@ -7,7 +7,7 @@ Description:
 		added or removed dynamically to represent hot-add/remove
 		operations.
 Users:		hotplug memory add/remove tools
-		https://w3.opensource.ibm.com/projects/powerpc-utils/
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
 
 What:		/sys/devices/system/memory/memoryX/removable
 Date:		June 2008
@@ -19,7 +19,7 @@ Description:
 		identify removable sections of the memory before attempting
 		potentially expensive hot-remove memory operation
 Users:		hotplug memory remove tools
-		https://w3.opensource.ibm.com/projects/powerpc-utils/
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils	
 
 What:		/sys/devices/system/memory/memoryX/phys_device
 Date:		September 2008
@@ -58,7 +58,7 @@ Description:
 		by root to offline that section.
 		# echo offline > /sys/devices/system/memory/memory22/state
 Users:		hotplug memory remove tools
-		https://w3.opensource.ibm.com/projects/powerpc-utils/
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
 
 
 What:		/sys/devices/system/memoryX/nodeY

diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -197,7 +197,7 @@ Description:	These files exist in every cpu's cache index directories.
 		Currently, only AMD Family 10h Processors support cache index
 		disable, and only for their L3 caches.  See the BIOS and
 		Kernel Developer's Guide at
-		http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
+		http://support.amd.com/us/Embedded_TechDocs/31116-Public-GH-BKDG_3-28_5-28-09.pdf	
 		for formatting information and other details on the
 		cache index disable.
 Users:    [email protected]
diff --git a/Documentation/Changes b/Documentation/Changes
@@ -331,7 +331,7 @@ o  <ftp://ftp.kernel.org/pub/linux/kernel/people/rusty/modules/>
 
 Mkinitrd
 --------
-o  <ftp://rawhide.redhat.com/pub/rawhide/SRPMS/SRPMS/>
+o  <https://code.launchpad.net/initrd-tools/main>
 
 E2fsprogs
 ---------
@@ -343,11 +343,11 @@ o  <http://jfs.sourceforge.net/>
 
 Reiserfsprogs
 -------------
-o  <http://www.namesys.com/pub/reiserfsprogs/reiserfsprogs-3.6.3.tar.gz>
+o  <http://www.kernel.org/pub/linux/utils/fs/reiserfs/>
 
 Xfsprogs
 --------
-o  <ftp://oss.sgi.com/projects/xfs/download/>
+o  <ftp://oss.sgi.com/projects/xfs/>
 
 Pcmciautils
 -----------
@@ -387,18 +387,18 @@ o <http://sourceforge.net/projects/fuse>
 
 mcelog
 ------
-o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/mcelog/>
+o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/>
 
 Networking
 **********
 
 PPP
 ---
-o  <ftp://ftp.samba.org/pub/ppp/ppp-2.4.0.tar.gz>
+o  <ftp://ftp.samba.org/pub/ppp/>
 
 Isdn4k-utils
 ------------
-o  <ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/isdn4k-utils.v3.1pre1.tar.gz>
+o  <ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/>
 
 NFS-utils
 ---------

diff --git a/Documentation/DocBook/scsi.tmpl b/Documentation/DocBook/scsi.tmpl
@@ -393,7 +393,7 @@
         </para>
         <para>
           For documentation see
-          <ulink url='http://www.torque.net/sg/sdebug26.html'>http://www.torque.net/sg/sdebug26.html</ulink>
+          <ulink url='http://sg.danny.cz/sg/sdebug26.html'>http://sg.danny.cz/sg/sdebug26.html</ulink>
         </para>
 <!-- !Edrivers/scsi/scsi_debug.c -->
       </sect2>

diff --git a/Documentation/DocBook/v4l/compat.xml b/Documentation/DocBook/v4l/compat.xml
@@ -1091,8 +1091,9 @@ signed 64-bit integer. Output devices should not send a buffer out
 until the time in the timestamp field has arrived. I would like to
 follow SGI's lead, and adopt a multimedia timestamping system like
 their UST (Unadjusted System Time). See
-http://reality.sgi.com/cpirazzi_engr/lg/time/intro.html. [This link is
-no longer valid.] UST uses timestamps that are 64-bit signed integers
+http://web.archive.org/web/*/http://reality.sgi.com
+/cpirazzi_engr/lg/time/intro.html. 
+UST uses timestamps that are 64-bit signed integers
 (not struct timeval's) and given in nanosecond units. The UST clock
 starts at zero when the system is booted and runs continuously and
 uniformly. It takes a little over 292 years for UST to overflow. There

diff --git a/Documentation/DocBook/v4l/fdl-appendix.xml b/Documentation/DocBook/v4l/fdl-appendix.xml
@@ -2,7 +2,7 @@
      The GNU Free Documentation License 1.1 in DocBook
      Markup by Eric Baudais <[email protected]>
      Maintained by the GNOME Documentation Project
-     http://developer.gnome.org/projects/gdp
+     http://live.gnome.org/DocumentationProject
      Version: 1.0.1
      Last Modified: Nov 16, 2000
 -->

diff --git a/Documentation/HOWTO b/Documentation/HOWTO
@@ -187,7 +187,7 @@ apply a patch.
 If you do not know where you want to start, but you want to look for
 some task to start doing to join into the kernel development community,
 go to the Linux Kernel Janitor's project:
-	http://janitor.kernelnewbies.org/
+	http://kernelnewbies.org/KernelJanitors	
 It is a great place to start.  It describes a list of relatively simple
 problems that need to be cleaned up and fixed within the Linux kernel
 source tree.  Working with the developers in charge of this project, you
@@ -315,7 +315,7 @@ process is tracked with the tool patchwork.  Patchwork offers a web
 interface which shows patch postings, any comments on a patch or
 revisions to it, and maintainers can mark patches as under review,
 accepted, or rejected.  Most of these patchwork sites are listed at
-http://patchwork.kernel.org/ or http://patchwork.ozlabs.org/.
+http://patchwork.kernel.org/.
 
 2.6.x -next kernel tree for integration tests
 ---------------------------------------------
@@ -595,7 +595,7 @@ start exactly where you are now.
 
 ----------
 Thanks to Paolo Ciarrocchi who allowed the "Development Process"
-(http://linux.tar.bz/articles/2.6-development_process) section
+(http://lwn.net/Articles/94386/) section
 to be based on text he had written, and to Randy Dunlap and Gerrit
 Huizenga for some of the list of things you should and should not say.
 Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,

diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt
@@ -581,7 +581,7 @@ to be handled by platform and generic code, not individual drivers.
 8. Vendor and device identifications
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-One is not not required to add new device ids to include/linux/pci_ids.h.
+One is not required to add new device ids to include/linux/pci_ids.h.
 Please add PCI_VENDOR_ID_xxx for vendors and a hex constant for device ids.
 
 PCI_VENDOR_ID_xxx constants are re-used. The device ids are arbitrary

diff --git a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt
@@ -606,7 +606,7 @@ Suparna Bhattacharya"
 ,Year="2006"
 ,pages="v2 123-138"
 ,note="Available:
-\url{http://www.linuxsymposium.org/2006/view_abstract.php?content_key=184}
+\url{http://www.linuxsymposium.org/2006/index_2006.php}
 \url{http://www.rdrop.com/users/paulmck/RCU/OLSrtRCU.2006.08.11a.pdf}
 [Viewed January 1, 2007]"
 ,annotation="

diff --git a/Documentation/SubmittingDrivers b/Documentation/SubmittingDrivers
@@ -161,7 +161,7 @@ How to NOT write kernel driver by Arjan van de Ven:
 	http://www.fenrus.org/how-to-not-write-a-device-driver-paper.pdf
 
 Kernel Janitor:
-	http://janitor.kernelnewbies.org/
+	http://kernelnewbies.org/KernelJanitors
 
 GIT, Fast Version Control System:
 	http://git-scm.com/
diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt
@@ -1,6 +1,6 @@
 The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ...
 
-  http://www.coraid.com/support/linux/EtherDrive-2.6-HOWTO.html
+  http://www.coraid.com/SUPPORT/EtherDrive-HBA  
 
   It has many tips and hints!
 

diff --git a/Documentation/arm/IXP2000 b/Documentation/arm/IXP2000
@@ -14,7 +14,7 @@ telecom systems. In addition to an XScale core, it contains up to 8
 interfaces (UTOPIA, SPI, etc), a PCI host bridge, one serial port,
 flash interface, and some other odds and ends. For more information, see:
 
-http://developer.intel.com/design/network/products/npfamily/ixp2xxx.htm
+http://developer.intel.com
 
 2. Linux Support
 

diff --git a/Documentation/arm/IXP4xx b/Documentation/arm/IXP4xx
@@ -45,15 +45,15 @@ require the use of Intel's propietary CSR softare:
 If you need to use any of the above, you need to download Intel's
 software from:
 
-   http://developer.intel.com/design/network/products/npfamily/ixp425swr1.htm
+   http://developer.intel.com/design/network/products/npfamily/ixp425.htm    
 
 DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPIETARY
 SOFTWARE.
 
 There are several websites that provide directions/pointers on using
 Intel's software:
 
-http://ixp4xx-osdg.sourceforge.net/ 
+   http://sourceforge.net/projects/ixp4xx-osdg/
    Open Source Developer's Guide for using uClinux and the Intel libraries 
 
 http://gatewaymaker.sourceforge.net/ 
@@ -112,21 +112,21 @@ http://www.adiengineering.com/productsCoyote.html
    Finally, there is an IDE port hanging off the expansion bus.
 
 Gateworks Avila Network Platform
-http://www.gateworks.com/avila_sbc.htm
+http://www.gateworks.com/support/overview.php
 
    The Avila platform is basically and IXDP425 with the 4 PCI slots
    replaced with mini-PCI slots and a CF IDE interface hanging off
    the expansion bus.
 
 Intel IXDP425 Development Platform
-http://developer.intel.com/design/network/products/npfamily/ixdp425.htm
+http://www.intel.com/design/network/products/npfamily/ixdpg425.htm  
 
    This is Intel's standard reference platform for the IXDP425 and is 
    also known as the Richfield board. It contains 4 PCI slots, 16MB
    of flash, two 10/100 ports and one ADSL port.
 
 Intel IXDP465 Development Platform
-http://developer.intel.com/design/network/products/npfamily/ixdp465.htm
+http://www.intel.com/design/network/products/npfamily/ixdp465.htm
 
    This is basically an IXDP425 with an IXP465 and 32M of flash instead
    of just 16.
@@ -141,15 +141,13 @@ Intel IXDPG425 Development Platform
    a pivot_root to NFS.
 
 Motorola PrPMC1100 Processor Mezanine Card
-http://www.fountainsys.com/datasheet/PrPMC1100.pdf
+http://www.fountainsys.com
 
    The PrPMC1100 is based on the IXCP1100 and is meant to plug into
    and IXP2400/2800 system to act as the system controller. It simply
    contains a CPU and 16MB of flash on the board and needs to be
    plugged into a carrier board to function. Currently Linux only
    supports the Motorola PrPMC carrier board for this platform.
-   See https://mcg.motorola.com/us/ds/pdf/ds0144.pdf for info
-   on the carrier board.
 
 5. TODO LIST
 

diff --git a/Documentation/arm/README b/Documentation/arm/README
@@ -41,12 +41,12 @@ Bug reports etc
 ---------------
 
   Please send patches to the patch system.  For more information, see
-  http://www.arm.linux.org.uk/patches/info.html  Always include some
+  http://www.arm.linux.org.uk/developer/patches/info.php Always include some
   explanation as to what the patch does and why it is needed.
 
   Bug reports should be sent to [email protected],
   or submitted through the web form at
-  http://www.arm.linux.org.uk/forms/solution.shtml
+  http://www.arm.linux.org.uk/developer/ 
 
   When sending bug reports, please ensure that they contain all relevant
   information, eg. the kernel messages that were printed before/during

diff --git a/Documentation/arm/SA1100/Assabet b/Documentation/arm/SA1100/Assabet
@@ -2,8 +2,7 @@ The Intel Assabet (SA-1110 evaluation) board
 ============================================
 
 Please see:
-http://developer.intel.com/design/strong/quicklist/eval-plat/sa-1110.htm
-http://developer.intel.com/design/strong/guides/278278.htm
+http://developer.intel.com
 
 Also some notes from John G Dorsey <[email protected]>:
 http://www.cs.cmu.edu/~wearable/software/assabet.html
@@ -64,7 +63,7 @@ Initial RedBoot configuration
 -----------------------------
 
 The commands used here are explained in The RedBoot User's Guide available
-on-line at http://sources.redhat.com/ecos/docs-latest/redboot/redboot.html.
+on-line at http://sources.redhat.com/ecos/docs.html.
 Please refer to it for explanations.
 
 If you have a CF network card (my Assabet kit contained a CF+ LP-E from

diff --git a/Documentation/arm/SA1100/Brutus b/Documentation/arm/SA1100/Brutus
@@ -1,7 +1,7 @@
 Brutus is an evaluation platform for the SA1100 manufactured by Intel.  
 For more details, see:
 
-http://developer.intel.com/design/strong/applnots/sa1100lx/getstart.htm
+http://developer.intel.com
 
 To compile for Brutus, you must issue the following commands:
 

diff --git a/Documentation/arm/SA1100/FreeBird b/Documentation/arm/SA1100/FreeBird
@@ -1,5 +1,5 @@
 Freebird-1.1 is produced by Legned(C) ,Inc.
-(http://www.legend.com.cn)
+http://web.archive.org/web/*/http://www.legend.com.cn
 and software/linux mainatined by Coventive(C),Inc.
 (http://www.coventive.com)
 

diff --git a/Documentation/arm/SA1100/GraphicsClient b/Documentation/arm/SA1100/GraphicsClient
@@ -71,7 +71,7 @@ Supported peripherals:
 - serial ports (ttyS[0-2])
   - ttyS0 is default for serial console
 - Smart I/O (ADC, keypad, digital inputs, etc)
-  See http://www.applieddata.com/developers/linux for IOCTL documentation
+  See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation
   and example user space code. ps/2 keybd is multiplexed through this driver
 
 To do:

diff --git a/Documentation/arm/SA1100/GraphicsMaster b/Documentation/arm/SA1100/GraphicsMaster
@@ -28,7 +28,7 @@ Supported peripherals:
 - serial ports (ttyS[0-2])
   - ttyS0 is default for serial console
 - Smart I/O (ADC, keypad, digital inputs, etc)
-  See http://www.applieddata.com/developers/linux for IOCTL documentation
+  See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation
   and example user space code. ps/2 keybd is multiplexed through this driver
 
 To do:

diff --git a/Documentation/arm/SA1100/Itsy b/Documentation/arm/SA1100/Itsy
@@ -4,7 +4,7 @@ research projects at Compaq that are related to pocket computing.
 
 For more information, see:
 
-	http://www.research.digital.com/wrl/itsy/index.html
+	http://www.hpl.hp.com/downloads/crl/itsy/
 
 Notes on initial 2.4 Itsy support (8/27/2000) :
 The port was done on an Itsy version 1.5 machine with a daughtercard with

diff --git a/Documentation/arm/SA1100/PLEB b/Documentation/arm/SA1100/PLEB
@@ -6,6 +6,6 @@ PLEB support has yet to be fully integrated.
 
 For more information, see:
 
-	http://www.cse.unsw.edu.au/~pleb/
+	http://www.cse.unsw.edu.au
 
 
diff --git a/Documentation/arm/SA1100/Victor b/Documentation/arm/SA1100/Victor
@@ -3,7 +3,7 @@ VisuAide, Inc. to be used by blind people.
 
 For more information related to Victor, see:
 
-	http://www.visuaide.com/victor
+	http://www.humanware.com/en-usa/products
 
 Of course Victor is using Linux as its main operating system.
 The Victor implementation for Linux is maintained by Nicolas Pitre:

diff --git a/Documentation/arm/SA1100/nanoEngine b/Documentation/arm/SA1100/nanoEngine
@@ -7,5 +7,5 @@ for more info.
 (Ref: Stuart Adams <[email protected]>)
 
 Also visit Larry Doolittle's "Linux for the nanoEngine" site:
-http://recycle.lbl.gov/~ldoolitt/bse/
+http://www.brightstareng.com/arm/nanoeng.htm
 
diff --git a/Documentation/binfmt_misc.txt b/Documentation/binfmt_misc.txt
@@ -111,6 +111,6 @@ cause unexpected behaviour and can be a security hazard.
 
 
 There is a web page about binfmt_misc at
-http://www.tat.physik.uni-tuebingen.de/~rguenth/linux/binfmt_misc.html
+http://www.tat.physik.uni-tuebingen.de
 
 Richard Günther <[email protected]>
diff --git a/Documentation/blockdev/paride.txt b/Documentation/blockdev/paride.txt
@@ -412,6 +412,6 @@ have in your mail headers, when sending mail to the list server.
 You might also find some useful information on the linux-parport
 web pages (although they are not always up to date) at
 
-	http://www.torque.net/parport/
+	http://web.archive.org/web/*/http://www.torque.net/parport/
 
 
diff --git a/Documentation/cdrom/packet-writing.txt b/Documentation/cdrom/packet-writing.txt
@@ -95,7 +95,7 @@ Using the pktcdvd sysfs interface
 
 Since Linux 2.6.20, the pktcdvd module has a sysfs interface
 and can be controlled by it. For example the "pktcdvd" tool uses
-this interface. (see http://people.freenet.de/BalaGi#pktcdvd )
+this interface. (see http://tom.ist-im-web.de/download/pktcdvd )
 
 "pktcdvd" works similar to "pktsetup", e.g.:
 

diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
@@ -691,7 +691,7 @@ There are ways to query or modify cpusets:
    cat, rmdir commands from the shell, or their equivalent from C.
  - via the C library libcpuset.
  - via the C library libcgroup.
-   (http://sourceforge.net/proects/libcg/)
+   (http://sourceforge.net/projects/libcg/)
  - via the python application cset.
    (http://developer.novell.com/wiki/index.php/Cpuset)
 

diff --git a/Documentation/development-process/4.Coding b/Documentation/development-process/4.Coding
@@ -281,7 +281,7 @@ With sparse, the programmer can be warned about confusion between
 user-space and kernel-space addresses, mixture of big-endian and
 small-endian quantities, the passing of integer values where a set of bit
 flags is expected, and so on.  Sparse must be installed separately (it can
-be found at http://www.kernel.org/pub/software/devel/sparse/ if your
+be found at https://sparse.wiki.kernel.org/index.php/Main_Page if your
 distributor does not package it); it can then be run on the code by adding
 "C=1" to your make command.
 

diff --git a/Documentation/device-mapper/dm-crypt.txt b/Documentation/device-mapper/dm-crypt.txt
@@ -36,7 +36,7 @@ Example scripts
 ===============
 LUKS (Linux Unified Key Setup) is now the preferred way to set up disk
 encryption with dm-crypt using the 'cryptsetup' utility, see
-http://luks.endorphin.org/
+http://clemens.endorphin.org/cryptography
 
 [[
 #!/bin/sh
Original file line number	Diff line number	Diff line change
Expand Up		@@ -6,6 +6,6 @@ PLEB support has yet to be fully integrated.

		For more information, see:

		http://www.cse.unsw.edu.au/~pleb/
		http://www.cse.unsw.edu.au