ibmvnic: Enable use of multiple tx/rx scrqs

Enables the use of multiple transmit and receive scrqs allowing the ibmvnic
driver to take advantage of multiqueue functionality. To achieve this, the
driver must implement the process of negotiating the maximum number of
queues allowed by the server. Initially, the driver will attempt to login
with the maximum number of tx and rx queues supported by the server. If
the server fails to allocate the requested number of scrqs, it will return
partial success in the login response. In this case, we must reinitiate
the login process from the request capabilities stage and attempt to login
requesting fewer scrqs.

Signed-off-by: John Allen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

drivers/net/ethernet/ibm/ibmvnic.c

@@ -800,11 +800,12 @@ static int ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
 			ret = NETDEV_TX_BUSY;
 			goto out;
 		}
-		lpar_rc = send_subcrq_indirect(adapter, handle_array[0],
+		lpar_rc = send_subcrq_indirect(adapter, handle_array[queue_num],
 					       (u64)tx_buff->indir_dma,
 					       (u64)num_entries);
 	} else {
-		lpar_rc = send_subcrq(adapter, handle_array[0], &tx_crq);
+		lpar_rc = send_subcrq(adapter, handle_array[queue_num],
+				      &tx_crq);
 	}
 	if (lpar_rc != H_SUCCESS) {
 		dev_err(dev, "tx failed with code %ld\n", lpar_rc);
@@ -989,7 +990,7 @@ static int ibmvnic_poll(struct napi_struct *napi, int budget)
 		netdev->stats.rx_bytes += length;
 		frames_processed++;
 	}
-	replenish_pools(adapter);
+	replenish_rx_pool(adapter, &adapter->rx_pool[scrq_num]);
 
 	if (frames_processed < budget) {
 		enable_scrq_irq(adapter, adapter->rx_scrq[scrq_num]);
@@ -1426,9 +1427,9 @@ static void init_sub_crqs(struct ibmvnic_adapter *adapter, int retry)
 		    entries_page : adapter->max_rx_add_entries_per_subcrq;
 
 		/* Choosing the maximum number of queues supported by firmware*/
-		adapter->req_tx_queues = adapter->min_tx_queues;
-		adapter->req_rx_queues = adapter->min_rx_queues;
-		adapter->req_rx_add_queues = adapter->min_rx_add_queues;
+		adapter->req_tx_queues = adapter->max_tx_queues;
+		adapter->req_rx_queues = adapter->max_rx_queues;
+		adapter->req_rx_add_queues = adapter->max_rx_add_queues;
 
 		adapter->req_mtu = adapter->max_mtu;
 	}
@@ -1776,13 +1777,11 @@ static void send_login(struct ibmvnic_adapter *adapter)
 		goto buf_map_failed;
 	}
 
-	rsp_buffer_size =
-	    sizeof(struct ibmvnic_login_rsp_buffer) +
-	    sizeof(u64) * (adapter->req_tx_queues +
-			   adapter->req_rx_queues *
-			   adapter->req_rx_add_queues + adapter->
-			   req_rx_add_queues) +
-	    sizeof(u8) * (IBMVNIC_TX_DESC_VERSIONS);
+	rsp_buffer_size = sizeof(struct ibmvnic_login_rsp_buffer) +
+			  sizeof(u64) * adapter->req_tx_queues +
+			  sizeof(u64) * adapter->req_rx_queues +
+			  sizeof(u64) * adapter->req_rx_queues +
+			  sizeof(u8) * IBMVNIC_TX_DESC_VERSIONS;
 
 	login_rsp_buffer = kmalloc(rsp_buffer_size, GFP_ATOMIC);
 	if (!login_rsp_buffer)
@@ -2401,6 +2400,16 @@ static int handle_login_rsp(union ibmvnic_crq *login_rsp_crq,
 	dma_unmap_single(dev, adapter->login_rsp_buf_token,
 			 adapter->login_rsp_buf_sz, DMA_BIDIRECTIONAL);
 
+	/* If the number of queues requested can't be allocated by the
+	 * server, the login response will return with code 1. We will need
+	 * to resend the login buffer with fewer queues requested.
+	 */
+	if (login_rsp_crq->generic.rc.code) {
+		adapter->renegotiate = true;
+		complete(&adapter->init_done);
+		return 0;
+	}
+
 	netdev_dbg(adapter->netdev, "Login Response Buffer:\n");
 	for (i = 0; i < (adapter->login_rsp_buf_sz - 1) / 8 + 1; i++) {
 		netdev_dbg(adapter->netdev, "%016lx\n",
@@ -3628,14 +3637,21 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id)
 	init_completion(&adapter->init_done);
 	wait_for_completion(&adapter->init_done);
 
-	/* needed to pull init_sub_crqs outside of an interrupt context
-	 * because it creates IRQ mappings for the subCRQ queues, causing
-	 * a kernel warning
-	 */
-	init_sub_crqs(adapter, 0);
+	do {
+		adapter->renegotiate = false;
 
-	reinit_completion(&adapter->init_done);
-	wait_for_completion(&adapter->init_done);
+		init_sub_crqs(adapter, 0);
+		reinit_completion(&adapter->init_done);
+		wait_for_completion(&adapter->init_done);
+
+		if (adapter->renegotiate) {
+			release_sub_crqs(adapter);
+			send_cap_queries(adapter);
+
+			reinit_completion(&adapter->init_done);
+			wait_for_completion(&adapter->init_done);
+		}
+	} while (adapter->renegotiate);
 
 	/* if init_sub_crqs is partially successful, retry */
 	while (!adapter->tx_scrq || !adapter->rx_scrq) {

drivers/net/ethernet/ibm/ibmvnic.h

@@ -980,6 +980,7 @@ struct ibmvnic_adapter {
 	struct ibmvnic_sub_crq_queue **tx_scrq;
 	struct ibmvnic_sub_crq_queue **rx_scrq;
 	int requested_caps;
+	bool renegotiate;
 
 	/* rx structs */
 	struct napi_struct *napi;