gpio: add userspace ABI for GPIO line information

This adds a GPIO line ABI for getting name, label and a few select
flags from the kernel.

This hides the kernel internals and only tells userspace what it
may need to know: the different in-kernel consumers are masked
behind the flag "kernel" and that is all userspace needs to know.

However electric characteristics like active low, open drain etc
are reflected to userspace, as this is important information.

We provide information on all lines on all chips, later on we will
likely add a flag for the chardev consumer so we can filter and
display only the lines userspace actually uses in e.g. lsgpio,
but then we first need an ABI for userspace to grab and use
(get/set/select direction) a GPIO line.

Sample output from "lsgpio" on ux500:

GPIO chip: gpiochip7, "8011e000.gpio", 32 GPIO lines
        line 0: unnamed unlabeled
        line 1: unnamed unlabeled
(...)
        line 25: unnamed "SFH7741 Proximity Sensor" [kernel output open-drain]
        line 26: unnamed unlabeled
(...)

Tested-by: Michael Welling <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>

drivers/gpio/gpiolib.c

@@ -331,14 +331,15 @@ static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 	struct gpio_device *gdev = filp->private_data;
 	struct gpio_chip *chip = gdev->chip;
 	int __user *ip = (int __user *)arg;
-	struct gpiochip_info chipinfo;
 
 	/* We fail any subsequent ioctl():s when the chip is gone */
 	if (!chip)
 		return -ENODEV;
 
+	/* Fill in the struct and pass to userspace */
 	if (cmd == GPIO_GET_CHIPINFO_IOCTL) {
-		/* Fill in the struct and pass to userspace */
+		struct gpiochip_info chipinfo;
+
 		strncpy(chipinfo.name, dev_name(&gdev->dev),
 			sizeof(chipinfo.name));
 		chipinfo.name[sizeof(chipinfo.name)-1] = '\0';
@@ -349,6 +350,52 @@ static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 		if (copy_to_user(ip, &chipinfo, sizeof(chipinfo)))
 			return -EFAULT;
 		return 0;
+	} else if (cmd == GPIO_GET_LINEINFO_IOCTL) {
+		struct gpioline_info lineinfo;
+		struct gpio_desc *desc;
+
+		if (copy_from_user(&lineinfo, ip, sizeof(lineinfo)))
+			return -EFAULT;
+		if (lineinfo.line_offset > gdev->ngpio)
+			return -EINVAL;
+
+		desc = &gdev->descs[lineinfo.line_offset];
+		if (desc->name) {
+			strncpy(lineinfo.name, desc->name,
+				sizeof(lineinfo.name));
+			lineinfo.name[sizeof(lineinfo.name)-1] = '\0';
+		} else {
+			lineinfo.name[0] = '\0';
+		}
+		if (desc->label) {
+			strncpy(lineinfo.label, desc->label,
+				sizeof(lineinfo.label));
+			lineinfo.label[sizeof(lineinfo.label)-1] = '\0';
+		} else {
+			lineinfo.label[0] = '\0';
+		}
+
+		/*
+		 * Userspace only need to know that the kernel is using
+		 * this GPIO so it can't use it.
+		 */
+		lineinfo.flags = 0;
+		if (desc->flags & (FLAG_REQUESTED | FLAG_IS_HOGGED |
+				   FLAG_USED_AS_IRQ | FLAG_EXPORT |
+				   FLAG_SYSFS))
+			lineinfo.flags |= GPIOLINE_FLAG_KERNEL;
+		if (desc->flags & FLAG_IS_OUT)
+			lineinfo.flags |= GPIOLINE_FLAG_IS_OUT;
+		if (desc->flags & FLAG_ACTIVE_LOW)
+			lineinfo.flags |= GPIOLINE_FLAG_ACTIVE_LOW;
+		if (desc->flags & FLAG_OPEN_DRAIN)
+			lineinfo.flags |= GPIOLINE_FLAG_OPEN_DRAIN;
+		if (desc->flags & FLAG_OPEN_SOURCE)
+			lineinfo.flags |= GPIOLINE_FLAG_OPEN_SOURCE;
+
+		if (copy_to_user(ip, &lineinfo, sizeof(lineinfo)))
+			return -EFAULT;
+		return 0;
 	}
 	return -EINVAL;
 }

include/uapi/linux/gpio.h

@@ -25,6 +25,32 @@ struct gpiochip_info {
 	__u32 lines;
 };
 
+/* Line is in use by the kernel */
+#define GPIOLINE_FLAG_KERNEL		(1UL << 0)
+#define GPIOLINE_FLAG_IS_OUT		(1UL << 1)
+#define GPIOLINE_FLAG_ACTIVE_LOW	(1UL << 2)
+#define GPIOLINE_FLAG_OPEN_DRAIN	(1UL << 3)
+#define GPIOLINE_FLAG_OPEN_SOURCE	(1UL << 4)
+
+/**
+ * struct gpioline_info - Information about a certain GPIO line
+ * @line_offset: the local offset on this GPIO device, fill in when
+ * requesting information from the kernel
+ * @flags: various flags for this line
+ * @name: the name of this GPIO line
+ * @label: a functional name for this GPIO line
+ * @kernel: this GPIO is in use by the kernel
+ * @out: this GPIO is an output line (false means it is an input)
+ * @active_low: this GPIO is active low
+ */
+struct gpioline_info {
+	__u32 line_offset;
+	__u32 flags;
+	char name[32];
+	char label[32];
+};
+
 #define GPIO_GET_CHIPINFO_IOCTL _IOR('o', 0x01, struct gpiochip_info)
+#define GPIO_GET_LINEINFO_IOCTL _IOWR('o', 0x02, struct gpioline_info)
 
 #endif /* _UAPI_GPIO_H_ */

tools/gpio/gpio-utils.h

@@ -16,6 +16,8 @@
 
 #include <string.h>
 
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
+
 static inline int check_prefix(const char *str, const char *prefix)
 {
 	return strlen(str) > strlen(prefix) &&

tools/gpio/lsgpio.c

@@ -26,12 +26,56 @@
 
 #include "gpio-utils.h"
 
+struct gpio_flag {
+	char *name;
+	unsigned long mask;
+};
+
+struct gpio_flag flagnames[] = {
+	{
+		.name = "kernel",
+		.mask = GPIOLINE_FLAG_KERNEL,
+	},
+	{
+		.name = "output",
+		.mask = GPIOLINE_FLAG_IS_OUT,
+	},
+	{
+		.name = "active-low",
+		.mask = GPIOLINE_FLAG_ACTIVE_LOW,
+	},
+	{
+		.name = "open-drain",
+		.mask = GPIOLINE_FLAG_OPEN_DRAIN,
+	},
+	{
+		.name = "open-source",
+		.mask = GPIOLINE_FLAG_OPEN_SOURCE,
+	},
+};
+
+void print_flags(unsigned long flags)
+{
+	int i;
+	int printed = 0;
+
+	for (i = 0; i < ARRAY_SIZE(flagnames); i++) {
+		if (flags & flagnames[i].mask) {
+			if (printed)
+				fprintf(stdout, " ");
+			fprintf(stdout, "%s", flagnames[i].name);
+			printed++;
+		}
+	}
+}
+
 int list_device(const char *device_name)
 {
 	struct gpiochip_info cinfo;
 	char *chrdev_name;
 	int fd;
 	int ret;
+	int i;
 
 	ret = asprintf(&chrdev_name, "/dev/%s", device_name);
 	if (ret < 0)
@@ -41,32 +85,55 @@ int list_device(const char *device_name)
 	if (fd == -1) {
 		ret = -errno;
 		fprintf(stderr, "Failed to open %s\n", chrdev_name);
-		goto free_chrdev_name;
+		goto exit_close_error;
 	}
 
 	/* Inspect this GPIO chip */
 	ret = ioctl(fd, GPIO_GET_CHIPINFO_IOCTL, &cinfo);
 	if (ret == -1) {
 		ret = -errno;
-		fprintf(stderr, "Failed to retrieve GPIO fd\n");
-		if (close(fd) == -1)
-			perror("Failed to close GPIO character device file");
-
-		goto free_chrdev_name;
+		perror("Failed to issue CHIPINFO IOCTL\n");
+		goto exit_close_error;
 	}
 	fprintf(stdout, "GPIO chip: %s, \"%s\", %u GPIO lines\n",
 		cinfo.name, cinfo.label, cinfo.lines);
 
-	if (close(fd) == -1)  {
-		ret = -errno;
-		goto free_chrdev_name;
+	/* Loop over the lines and print info */
+	for (i = 0; i < cinfo.lines; i++) {
+		struct gpioline_info linfo;
+
+		memset(&linfo, 0, sizeof(linfo));
+		linfo.line_offset = i;
+
+		ret = ioctl(fd, GPIO_GET_LINEINFO_IOCTL, &linfo);
+		if (ret == -1) {
+			ret = -errno;
+			perror("Failed to issue LINEINFO IOCTL\n");
+			goto exit_close_error;
+		}
+		fprintf(stdout, "\tline %d:", linfo.line_offset);
+		if (linfo.name[0])
+			fprintf(stdout, " %s", linfo.name);
+		else
+			fprintf(stdout, " unnamed");
+		if (linfo.label[0])
+			fprintf(stdout, " \"%s\"", linfo.label);
+		else
+			fprintf(stdout, " unlabeled");
+		if (linfo.flags) {
+			fprintf(stdout, " [");
+			print_flags(linfo.flags);
+			fprintf(stdout, "]");
+		}
+		fprintf(stdout, "\n");
+
 	}
 
-free_chrdev_name:
+exit_close_error:
+	if (close(fd) == -1)
+		perror("Failed to close GPIO character device file");
 	free(chrdev_name);
-
 	return ret;
-
 }
 
 void print_usage(void)