Merge branch 'i2c/for-4.20' of git://git.kernel.org/pub/scm/linux/ker…

…nel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "I2C has not so much stuff this time. Mostly driver enablement for new
  SoCs, some driver bugfixes, and some cleanups"

* 'i2c/for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (35 commits)
  MAINTAINERS: add maintainer for Renesas RIIC driver
  i2c: sh_mobile: Remove dummy runtime PM callbacks
  i2c: uniphier-f: fix race condition when IRQ is cleared
  i2c: uniphier-f: fix occasional timeout error
  i2c: uniphier-f: make driver robust against concurrency
  i2c: i2c-qcom-geni: Simplify irq handler
  i2c: i2c-qcom-geni: Simplify tx/rx functions
  i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers
  i2c: mux: mlxcpld: simplify code to reach the adapter
  i2c: mux: ltc4306: simplify code to reach the adapter
  i2c: mux: pca954x: simplify code to reach the adapter
  i2c: core: remove level of indentation in i2c_transfer
  i2c: core: remove outdated DEBUG output
  i2c: zx2967: use core to detect 'no zero length' quirk
  i2c: tegra: use core to detect 'no zero length' quirk
  i2c: qup: use core to detect 'no zero length' quirk
  i2c: omap: use core to detect 'no zero length' quirk
  i2c: Convert to using %pOFn instead of device_node.name
  i2c: brcmstb: Allow enabling the driver on DSL SoCs
  eeprom: at24: fix unexpected timeout under high load
  ...

Documentation/devicetree/bindings/i2c/i2c-designware.txt

@@ -3,6 +3,7 @@
 Required properties :
 
  - compatible : should be "snps,designware-i2c"
+                or "mscc,ocelot-i2c" with "snps,designware-i2c" for fallback
  - reg : Offset and length of the register set for the device
  - interrupts : <IRQ> where IRQ is the interrupt number.
 
@@ -11,8 +12,12 @@ Recommended properties :
  - clock-frequency : desired I2C bus clock frequency in Hz.
 
 Optional properties :
+ - reg : for "mscc,ocelot-i2c", a second register set to configure the SDA hold
+   time, named ICPU_CFG:TWI_DELAY in the datasheet.
+
  - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
-   This option is only supported in hardware blocks version 1.11a or newer.
+   This option is only supported in hardware blocks version 1.11a or newer and
+   on Microsemi SoCs ("mscc,ocelot-i2c" compatible).
 
  - i2c-scl-falling-time-ns : should contain the SCL falling time in nanoseconds.
    This value which is by default 300ns is used to compute the tLOW period.

Documentation/devicetree/bindings/i2c/i2c-rcar.txt

@@ -3,7 +3,9 @@ I2C for R-Car platforms
 Required properties:
 - compatible:
 	"renesas,i2c-r8a7743" if the device is a part of a R8A7743 SoC.
+	"renesas,i2c-r8a7744" if the device is a part of a R8A7744 SoC.
 	"renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC.
+	"renesas,i2c-r8a77470" if the device is a part of a R8A77470 SoC.
 	"renesas,i2c-r8a774a1" if the device is a part of a R8A774A1 SoC.
 	"renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC.
 	"renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC.

Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt

@@ -5,6 +5,7 @@ Required properties:
 			- "renesas,iic-r8a73a4" (R-Mobile APE6)
 			- "renesas,iic-r8a7740" (R-Mobile A1)
 			- "renesas,iic-r8a7743" (RZ/G1M)
+			- "renesas,iic-r8a7744" (RZ/G1N)
 			- "renesas,iic-r8a7745" (RZ/G1E)
 			- "renesas,iic-r8a774a1" (RZ/G2M)
 			- "renesas,iic-r8a7790" (R-Car H2)

MAINTAINERS

@@ -12548,6 +12548,12 @@ S:	Supported
 F:	drivers/i2c/busses/i2c-rcar.c
 F:	drivers/i2c/busses/i2c-sh_mobile.c
 
+RENESAS RIIC DRIVER
+M:	Chris Brandt <[email protected]>
+S:	Supported
+F:	Documentation/devicetree/bindings/i2c/i2c-riic.txt
+F:	drivers/i2c/busses/i2c-riic.c
+
 RENESAS USB PHY DRIVER
 M:	Yoshihiro Shimoda <[email protected]>
 L:	[email protected]

drivers/i2c/busses/Kconfig

@@ -432,12 +432,13 @@ config I2C_BCM_KONA
 	  If you do not need KONA I2C interface, say N.
 
 config I2C_BRCMSTB
-	tristate "BRCM Settop I2C controller"
-	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+	tristate "BRCM Settop/DSL I2C controller"
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_63XX || \
+		   COMPILE_TEST
 	default y
 	help
 	  If you say yes to this option, support will be included for the
-	  I2C interface on the Broadcom Settop SoCs.
+	  I2C interface on the Broadcom Settop/DSL SoCs.
 
 	  If you do not need I2C interface, say N.